Email updates

Keep up to date with the latest news and content from BMC Proceedings and BioMed Central.

This article is part of the supplement: 22nd European Society for Animal Cell Technology (ESACT) Meeting on Cell Based Technologies

Open Access Meeting abstract

Application of hydrocyclones for continuous cultivation of SP-2/0 cells in perfusion bioreactors: Effect of hydrocyclone operating pressure

Elsayed A Elsayed12* and Roland Wagner3

Author Affiliations

1 Advanced Chair for Proteomics & Cytomics Research, Zoology Department, Faculty of Science, King Saud University, 11451 Riyadh, Kingdom of Saudi Arabia

2 Natural & Microbial Products Dept., National Research Centre, Dokki, Cairo, Egypt

3 Technology Development Department, Rentschler Biotechnology GmbH, D-88471 Laupheim, Germany

For all author emails, please log on.

BMC Proceedings 2011, 5(Suppl 8):P65  doi:10.1186/1753-6561-5-S8-P65

The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1753-6561/5/S8/P65


Published:22 November 2011

© 2011 Elsayed and Wagner; licensee BioMed Central Ltd.

This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Background

Hydrocyclones (HCs) have been recently extensively evaluated for their application in the separation of mammalian cells in perfusion bioreactors. The high centrifugal force derived within hydrocyclones is the key mechanism for cell separation inside such small-sized simple devices. This is usually accompanied by a very short residence time of the cells inside the separating equipment, usually not more than 0.2 s. Moreover, they have other specific characteristics, which highly recommend their application for the production of pharmaceutical products in perfusion cultivation bioreactors. They are characterized by their high performance, robustness, lack of movable parts, ease of in situ sterilization and suitability for cleaning-in-place processes.

Materials and methods

The hydrocyclone HC 2520, specially designed for cell cultivation, was used for separation of the recombinant mouse lymphoid cell line SP-2/0. It has a 25-mm underflow and 20-mm overflow orifice. A pulsation-free pumphead (Watson Marlow 505L) was fitted to a WM 505DU pump and the perfusion was performed intermittently. Cell were cultured on serum-free ZKT-1 medium supplemented with 5% foetal bovine serum.

Results

Effect of hydrocyclone operating pressure on cell growth and cell viability

The results obtained (Figure 1) showed that cells required an adaptation phase to adapt themselves to the HC operating pressure. Moreover, the length of the adaptation phase depends on the HC pressure. Generally, cells were able to grow with high viability after the operation of hydrocyclone at both tested pressure values (0.85 and 1.30 bar). Maximal cell concentrations of about 8.2 × 106 and 6.0 × 106 mL-1 were achieved at an operating pressure of 0.85 and 1.30 bar with a viability range from 92 to 98%, respectively. This corresponds to a 5- and 3.5-fold increase than the batch cultivation, respectively.

thumbnailFigure 1. Cell growth and cell viability

Effect of hydrocyclone operating pressure on separation efficiency and separated cell quality

Results (Figure 2) showed that increasing operating pressure from 0.85 to 1.30 bar increased the average total separation efficiency from 89 to 95%. Additionally, results also showed that hydrocyclone preferably separates more viable cells in the underflow, and hence, back to the bioreactor system. Thus, more dead cells are separated in the overflow leaving the bioreactor system, which will improve system viability and product quality.

thumbnailFigure 2. Hydrocyclone separation efficiency

Conclusions

- Hydrocyclone can be successfully used for cell separation in continuous mammalian perfusion bioreactors.

- Cells adapt themselves to the shear forces inside the HC without being adversely affected by the pressure.

- Higher separation efficiencies up to 96% can be achieved depending on the operating HC pressure.

- HCs separate preferably more living cells in the underflow, thus more dead cells are leaving the system, which will finally lead to the improvement of system viability and product quality.