Email updates

Keep up to date with the latest news and content from BMC Structural Biology and BioMed Central.

Open Access Highly Accessed Review

Integrative structural modeling with small angle X-ray scattering profiles

Dina Schneidman-Duhovny12*, Seung Joong Kim1 and Andrej Sali12*

Author affiliations

1 Department of Bioengineering and Therapeutic Sciences, Department of Pharmaceutical Chemistry, and California Institute for Quantitative Biosciences (QB3), University of California at San Francisco, San Francisco, USA

2 UCSF MC 2552, Byers Hall at Mission Bay, Suite 503B, University of California at San Francisco, 1700 4th Street, San Francisco, CA, 94158, USA

For all author emails, please log on.

Citation and License

BMC Structural Biology 2012, 12:17  doi:10.1186/1472-6807-12-17

The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1472-6807/12/17


Received:17 April 2012
Accepted:16 July 2012
Published:16 July 2012

© 2012 Schneidman-Duhovny et al.; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Recent technological advances enabled high-throughput collection of Small Angle X-ray Scattering (SAXS) profiles of biological macromolecules. Thus, computational methods for integrating SAXS profiles into structural modeling are needed more than ever. Here, we review specifically the use of SAXS profiles for the structural modeling of proteins, nucleic acids, and their complexes. First, the approaches for computing theoretical SAXS profiles from structures are presented. Second, computational methods for predicting protein structures, dynamics of proteins in solution, and assembly structures are covered. Third, we discuss the use of SAXS profiles in integrative structure modeling approaches that depend simultaneously on several data types.

Keywords:
Small Angle X-ray Scattering (SAXS); Protein structure prediction; Macromolecular assembly; Integrative modeling

Introduction

SAXS is becoming a widely used technique for low-resolution structural characterization of macromolecules in solution [1-5]. The major advantage of SAXS compared to other structural characterization techniques is that it can be performed under a wide variety of solution conditions, including near physiological conditions, and for a wide range of molecular sizes. The experiment is typically performed with ~0.5–10.0 mg/mL of a macromolecular sample in a ~15–30 μL volume, and usually takes less than a few minutes on a well-equipped synchrotron beam line. In addition, recent technological advances allow in-house laboratory data collection without a beam line X-ray source.

The SAXS experiment results in a small-angle X-ray scattering intensity of a sample (a macromolecule in a buffer) as a function of spatial frequency [6-8]. The SAXS profile of the macromolecule is then produced by subtracting the SAXS profile of the buffer from the SAXS profile of the sample. Because of rotational averaging, the information content of a SAXS profile is significantly lower compared to that of a diffraction pattern in X-ray crystallography or even a density map from electron microscopy (EM). Nevertheless, SAXS can provide shape information about proteins and macromolecular assemblies that are not amenable to X-ray crystallography, NMR spectroscopy, or EM. Information about the radius of gyration, volume, and mass can be easily extracted from the profile [8,9]. The profile can be converted into an approximate distribution of pairwise electron distances in the macromolecule (i.e. the pair-distribution function) via a Fourier transform [7,8,10]. Moreover, SAXS can be used to study the dynamics of the system [11,12], not only a static structure.

SAXS profiles can be used for computation of so called ab initio 3D shapes that are consistent with the measured pair-distribution function [13-15]. SAXS profiles can also be used for atomic resolution modeling in multiple modeling applications, including determination of biologically relevant states from the crystal [16], binding of small molecules [17], comparative protein structure modeling [18], fold recognition [19-21], protein domain assembly [22], assembly of protein complexes [23-25], modeling of a perturbed conformation (eg, modeling active conformation starting from non-active conformation) [26], and modeling of an ensemble of conformations that represent solution conformational ensemble [27-29]. Moreover, SAXS profiles can provide structural information about oligomeric states and interactions between proteins [30,31].

Characterizing structures of multi-subunit complexes generally benefits from using varied experimental datasets [32,33]. In this hybrid or integrative approach, the datasets are encoded into a scoring function used to evaluate candidate models generated by a sampling method. Due to the simplicity of data collection, SAXS profiles are attractive candidates for combination with other computational and experimental techniques by the integrative approach [24].

In this review, we describe the recently developed computational methods that were inspired by the ability to collect high-accuracy SAXS profiles. First, the methods for computing theoretical SAXS profiles from structures are presented. Second, we describe how SAXS is incorporated into computational methods for predicting protein structures, dynamics of proteins in solution, and assembly structures. Finally, we describe the integrative modeling structure approach that depends simultaneously on several data types and suggest data types that are complementary to SAXS.

Computing the theoretical scattering

Computation of an accurate theoretical SAXS profile from an atomic model is critical for including SAXS data in any modeling application. Progress was made based on the recent availability of high resolution SAXS datasets [1-3,5]. Theoretical SAXS profile calculation from the coordinates of atomic models requires spherical averaging because of random orientations of macromolecules in solution. Since the observed scattering profile is the difference between the scattering of the target macromolecule with its ordered hydration layer and the excluded volume that takes into account the missing scattering of bulk solvent, methods for calculating SAXS profiles have to account for the excluded volume of bulk solvent and the hydration layer. As a result, the approaches for profile computation generally differ in the methods used for spherical averaging, treatment of the excluded volume, and treatment of the hydration layer (Table 1).

Table 1. Methods for theoretical profile calculation

Spherical averaging methods need to balance accuracy and run-time performance. Spherical averaging can be computed directly from all pairwise interatomic distances using the Debye formula [24,35,42,46]. CRYSOL [34] uses multipole expansion for fast calculation of a spherically averaged scattering profile. Other options include Monte-Carlo sampling [36], numerical quadrature [37,41], cubature formula [43], and Zernike polynomial expansions [45]. Coarse graining that combines several atoms in a single scattering center can also be used to speed up the calculation [38,40].

The excluded volume term typically depends on the shape of the molecule by calculating the scattering assuming an electron density equivalent to the bulk solvent [34,47,48]. Alternatively, it is possible to represent the excluded volume by explicit placement of water molecules [41]. However, accurate approximation of the excluded volume is challenging because the total volume varies significantly depending on a set of values of atomic radii. Therefore, some methods allow adjustment of the excluded volume of the molecule for optimal fitting to the experimental SAXS profile [34,42,43].

The hydration layer can be treated explicitly by introducing water molecules [38,39,41] or using pre-computed solvent density maps [43,44]. Implicit hydration layer models surround the molecule with a continuous envelope of adjustable density [34,36,42].

There is generally a trade-off between the accuracy and speed of computation. For example, if a method is used to evaluate a profile fit for multiple models, it has to be fast compared to a method that will be used to compare a single structure to the SAXS profile. Wide angle scattering requires more accurate methods to account for atomic resolution details that can be seen at wide angles [39,41,44].

The theoretical profile is typically fitted to the experimental one by minimization of the χ value [34]:

<a onClick="popup('http://www.biomedcentral.com/1472-6807/12/17/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.biomedcentral.com/1472-6807/12/17/mathml/M1">View MathML</a>

(1)

where Iexp(q) and I(q) are the experimental and computed profiles, respectively, σ(q) is the experimental error of the measured profile, M is the number of points in the profile, and c is the scaling factor. Sometimes, there are additional fitting parameters that require optimization during fitting, such as the excluded volume of the protein, the density of the hydration layer [34,42,43], and buffer rescaling factor [41]. The major problem with χ is that its values are comparable only for the same experimental profile since it depends on the profile experimental error. Therefore, one can compare the fitting quality between two models against the same profile using χ, but cannot compare the fit of one model against two different experimental profiles.

To assess the performance of different profile calculation programs (Zernike polynomials, Fast-SAXS, AquaSAXS, CRYSOL and FoXS), we compute the theoretical scattering for a model protein glucose isomerase [PDB:2G4J] (Figure 1) and fit it to the experimental profile. A high accuracy SAXS profile (qmax = 0.5 Å-1) was collected and analyzed at the Advanced Light Source SIBYLS beam line (BL12.3.1), as described previously [1]. The molecule includes approximately 12,000 atoms. FoXS and CRYSOL provide the most accurate fit with χ values of 4.7 and 7.9, respectively, in less than 8 seconds.

thumbnailFigure 1. Theoretical SAXS profiles of glucose isomerase from five programs fitted against the experimental SAXS profile.

Protein structure prediction

X-ray structure vs. solution structure

The most straightforward application of SAXS is for comparing a crystallographic structure with a solution structure. The theoretical profile computed from the X-ray structure is compared with the experimental one. The comparison can help in identifying biologically relevant oligomeric states or the solution quaternary structure of the protein. For example, a comparison of the SAXS profile of yeast Nup145N (443–605) with the crystal structure [PDB:3KEP] confirmed the existence of a dimer seen in the asymmetric unit in solution [49] (Figure 2).

thumbnailFigure 2. Yeast Nup145N (443–605) crystal structure [PDB:3kep] monomer (green) and dimer (red)versusthe solution SAXS profile (black).

A system can exist in a mixture of several states in solution, such as monomer-dimer equilibrium. In such cases, fitting of a weighted average of theoretical profiles can be attempted for comparison with the experimental profile. The program OLIGOMER implements a non-negative linear least-squares algorithm to find the weights of the theoretical profiles that minimize the discrepancy with the experimental profile [50]. FoXS webserver allows fitting of up to five weighted computed profiles to the experimental profile. The selection of weighted profiles is performed using Minimal Ensemble Search (MES) that is based on a genetic algorithm [28]. FoXS-MES webserver was previously used to determine the length and composition of the XLF-XRCC4 filaments in solution [51]. The XLF-XRCC4 complex forms filaments in the crystal lattice [51]. Theoretical scattering profiles were computed for various filament lengths with FoXS, followed by MES [28] that selects a combination of various filament lengths to optimize the fit to the experimental SAXS profile. The best fit obtained with the single filament had χ value of 5.09, while the minimal ensemble of three different filaments reduced the χ value to 1.66 (Figure 3).

thumbnailFigure 3. FoXS-MES server output for ensemble fit (green) of the SAXS profile (black)versusa single conformation fit (red) for XLF-XRCC4 filaments. A) Fit plot, B) Residuals plot, and C) Ensemble structures and weights.

Comparative modeling and missing fragment modeling

If X-ray structures have unresolved regions, such as side-chains, loops or His tags that are not seen in the electron density, modeling of a complete structure based on the sequence used for SAXS data collection is critical for a useful comparison of computed and experimental profiles. The fraction of missing atoms in a structural model results in an almost double fraction of missing distances in the calculation of the theoretical profile. For example, if 5% of residues are missing from the X-ray structure of 100 residue protein, the fraction of missing distances in computation of the theoretical profile is almost 10%. If only a homologous structure of the studied protein is available, it is also important to model the target sequence by comparative modeling [18,52], since even at high sequence identity the homologous proteins may have variable loop lengths. In addition, an experimental SAXS profile can help in distinguishing between alternative structural models [41]. Structural models can be generated using a variety of programs and web services, such as HHpred [53] (http://toolkit.tuebingen.mpg.de/hhpred webcite), M4T [54] (http://manaslu.aecom.yu.edu/M4T/ webcite), SWISS-MODEL [55](http://swissmodel.expasy.org/ webcite), Robetta [56] (http://robetta.bakerlab.org/ webcite), I-TASSER [57] (http://zhanglab.ccmb.med.umich.edu/I-TASSER/ webcite), and ModWeb [58] (http://salilab.org/modweb webcite). Both, the modeling task and profile calculation can be performed using UCSF Chimera molecular graphics program [59] that has an interface to MODELLER [18] for automated comparative modeling and FoXS [42] for profile calculation and fitting. For example, the structure of the C-terminal domain of Nup133 was characterized by both X-ray crystallography and SAXS. Using Chimera, the X-ray structure [PDB:3KFO] is fitted to the SAXS profile with the resulting χ value of 3.04 (Figure 4). After adding the missing residues and His tag with MODELLER using the Chimera interface, the fit improves significantly (χ = 1.1), especially for 0.17 Å-1 < q < 0.22 Å-1 (Figure 4).

thumbnailFigure 4. Comparative modeling and SAXS profile fitting using the Chimera visualization package. MODELLER was used to add missing residues and a His tag on the C-terminal domain of Nup133 (see sequence alignment in the upper right window). Three models were generated (red, green and blue) using a template structure [PDB:3KFO] (white). The FoXS interface (lower left window) was used to fit the profiles computed for the X-ray structure and the models to the experimental SAXS profile (lower right window). A) model window, B) sequence alignment window, C) model scores, D) FoXS interface window, and E) FoXS output window.

Fold and shape recognition

A SAXS profile can be utilized in structural modeling of protein sequences for which template structures cannot be identified using a sequence similarity search. Zheng and Doniach [20] used a SAXS profile to filter structures generated by gapless threading on the templates. The recently developed SAXSTER method [21] integrates a SAXS-based scoring function with the MUSTER threading algorithm. The SAXS profile fit score is combined with the threading alignment score, resulting in a higher accuracy model compared to that from MUSTER without using a SAXS profile.

If comparative modeling or fold recognition methods fail to produce accurate models, it is possible to search for proteins with similar overall folds or shapes using a SAXS profile of a given protein. The DaRa server [60] searches for similarity among the theoretical scattering profiles pre-computed from thousands of PDB structures. The Shape Search Engine in SASTBX package (http://sastbx.als.lbl.gov/cgi-bin/shapeup.html webcite) represents the structures using Zernike polynomials and performs a rapid shape comparison against PDB [61], PISA [62], and 3Dcomplex databases [63].

Dynamics modeling

SAXS is a valuable tool in characterizing the ensemble of conformations sampled by a macromolecule in solution. Depending on the variance of the solution ensemble, alternative conformations or an ensemble of conformations may be needed to address the discrepancy between an experimental SAXS profile and an X-ray structure. For example, the protein can be in a non-active conformation in the crystal and in the active conformation in solution. In such a case, one needs to model alternative conformations starting with the X-ray structure. Multi-domain proteins are likely to be conformationally variable in solution, in part depending on the length and composition of the segments between domains. Accurate profile fitting in this case requires a set of multiple conformations.

Fitting a single perturbed conformation to a SAXS profile

One possible approach is to use a SAXS profile as a filter for previously generated conformations: thousands of conformations are generated first and the scattering profile of each conformation is computed and fitted to the experimental profile. There are several ways to generate alternative conformations. The BUNCH method [23] uses simulated annealing approach where the domains are kept rigid and linkers are flexible chains composed of dummy residues. The BILBOMD method [28] uses multiple time-step Molecular Dynamics at high temperatures while keeping the domains rigid and the linkers flexible.

Alternatively, it is possible to use a SAXS profile directly in the optimization. Monte Carlo based method can be used for sampling relative domain orientations [24], where the gradient of χ2 is used for guiding the optimization. In a different approach, Normal Mode Analysis has been utilized for fitting the pair distribution function derived from a SAXS profile [64]. A recent method by Zheng and Tekpinar [65] uses a coarse-grained Elastic Network Model (1 bead per residue) coupled with coarse-grained SAXS profile calculation that includes an implicit hydration layer.

Even if a good fit of a SAXS profile can be obtained with a single conformation, it is still possible that the protein is flexible in solution [11]. Kratky [6] and Porod-Debye [9,29] plots should be used to distinguish between rigid and flexible proteins. However, this classification can be difficult for some proteins, such as those with rigid domains with long flexible loops.

Modeling an ensemble of solution conformations

If the SAXS profile indicates that a protein is flexible in solution [9], we can attempt to fit the profile with an ensemble of conformations. Selection of a representative ensemble out of thousands of conformations is challenging since the ensemble size is not known and the number of possible ensembles is enormous. Several approaches exist to select an ensemble that fits a SAXS profile from a pool of multiple conformations. EOM [27] and BILBOMD Minimal Ensemble Search (MES) [28] use a genetic algorithm for ensemble selection. In the BSS-SAXS approach [66], the conformations are first clustered by RMSD and profile similarity into a small number of clusters, followed by a Bayesian-based Monte-Carlo method to optimize the weights of each cluster. Similarly, the EROS method [67] samples the conformations with a replica exchange Monte Carlo method, clusters the models, and optimizes cluster weights. Typically, significant improvement in the profile fit can be seen with a small ensemble size of 2 to 5 weighted conformations in MES or 10 conformations in EOM. In practice, the solution ensemble size might be much larger, but the selected ensemble is sufficient to fit the experimental profile and should be viewed as a minimal ensemble to explain the data. Measures, such as RMSD, NSD, radius of gyration, and maximal diameter are typically used to assess the ensemble variance [27,28]. If the variance in these parameters in the selected ensemble is as large as in the initial pool of conformations, the protein is likely to be flexible. Alternatively, macromolecules with distinct values of RMSD, radius of gyration, and maximal diameter, as compared to the initial pool, are less flexible and may have a limited number of conformers in solution.

SAXS was used to study the flexibility of the Mre11-Rad50 dimers in solution with and without the ATP ligand [68]. The SAXS profiles show a transition from a flexible to ordered conformation upon ATP binding. The BILBOMD method [28] was used to model the solution ensemble of the Mre11-Rad50 dimers [68]. Multiple models were generated by Molecular Dynamics, followed by fitting to a SAXS profile with FoXS and MES. While the best fitting model had a χ value of 4.3, the minimal ensemble of three different models reduced the χ value to 2.9 (Figure 5).

thumbnailFigure 5. FoXS-MES ensemble fit (green) of the SAXS profile (black)versusa single conformation fit (red) for Mre11-Rad50. A) Fit plot, B) Residuals plot, and C) Ensemble structures and weights.

Time-resolved SAXS

Recent advances in time-resolved SAXS experiments provide a unique opportunity for data collection on with a ~10 microsecond resolution [69]. Structural information on the unfolded ensemble and early folding intermediates of proteins can be obtained by application of continuous or stopped-flow mixers [70-72]. In principle, this information can be used for validation of folding trajectories [69] generated by all atom Molecular Dynamics simulations that can cover similar timescales [73]. Processes such as virus shell assembly [74], virus maturation [75,76], and amyloid formation [77] can also be monitored by time-resolved SAXS. The minimal number of independent components (conformations or oligomeric states) in a set of time-resolved SAXS profiles can be inferred from singular value decomposition (SVD) analysis [7,30,50,78-80]. The method gives the minimal number of eigenvectors that account for the set of time-resolved profiles. The approach provides a lower bound for the actual number of components in the system.

Assembly modeling

Template-based modeling

Similarly to the modeling of individual proteins, it may be possible to model an assembly using standard comparative modeling techniques. The approach requires structural templates for the sequences of the target assembly that cover the entire assembly or a sufficiently overlapping set of its subunits. A comparative model of an assembly can be assessed by comparison to the experimental SAXS profile, as well as additional scoring functions that score subunit interaction interfaces [24]. Recently, several approaches for template-based pairwise protein docking were developed, including KBDOCK [81] (http://kbdock.loria.fr/ webcite), GWIDD [82,83] (http://gwidd.bioinformatics.ku.edu webcite), 3DID [84] (http://3did.irbbarcelona.org/ webcite), SCOPPI [85] (http://www.scoppi.org/ webcite), and PRISM [86].

Protein-protein docking

If atomic structures of subunits in a protein-protein complex are available, computational pairwise docking methods can be applied to predict the complex structure. The accuracy of computational protein-protein docking remains unsatisfactory despite recent advances in the docking methods [87,88]. Combining computational docking with SAXS is a promising approach towards increasing the accuracy of computational docking. There are several methods for rigid docking with a SAXS profile. DIMFOM and GLOBSYMM [23] are based on the CRYSOL program for SAXS profile fitting with a simplified sampling algorithm, where the structure of one monomer is rolled over the surface of the other; however, no interface optimization is performed. SASREF [23] uses Simulated Annealing for orientation sampling and CRYSOL for fit evaluation. In another method, the scoring function combines SAXS and interface complementarity terms, with orientation sampling by a local search method that requires a relatively accurate initial configuration [24]; in the absence of the initial configuration, the method starts from 1000 random orientations. Two recently developed methods, pyDockSAXS [89] and FoXSDock [90], integrate global search docking programs, energy based scoring functions, and a SAXS fit score. pyDockSAXS uses FTDock [91] for sampling complex orientations, pyDock [92] for energy-based scoring, and CRYSOL for SAXS scoring. FoXSDock uses PatchDock [93] for orientation sampling, FireDock [94] for refinement and energy-based scoring, and FoXS for SAXS scoring. Both methods nearly double the success rate relative to docking alone: pyDockSAXS succeds to rank a near native model within top 10 predictions for 43% of the Benchmark 2.0 cases (14 of the 84 cases were excluded because of incomplete unbound or bound structures), and FoXSDock succeeds in 60% of cases on the same subset of Benchmark 2.0 cases, compared to less than 30% for docking alone and 23% for SASREF that uses only SAXS score without interface optimization. The increase in the success rate of FoXSDock compared to pyDockSAXS is most likely due to the increased resolution of configurational sampling.

The ability of a SAXS profile to distinguish between candidate docking models depends on the shapes of input proteins. For example, if one of the docked proteins has a globular shape, all the complexes with the correct binding site on the other protein will have similar shapes, almost identical SAXS profiles, and a similar range of low χ values, irrespective of the ligand orientation (Figure 6a). If the shape of one of the proteins is symmetric, there will be a number of clusters with similar shapes, SAXS profiles, and low χ values (eg, three clusters for the triangular receptor shape; Figure 6b).

thumbnailFigure 6. Docking models with similar shapes generate similar profiles. A) Top 10 docking models for adrenodoxin reductase-adrenodoxin complex [PDB:1E6E], and B) top 20 docking models for PAPS reductase-thioredoxin complex [PDB:2O8V].

When transient protein-protein interactions are modeled utilizing a SAXS profile, the solution sample may contain a mixture of monomers and complexes. The modeling procedure has to fit the experimental profile including the monomeric and complex models, and the weights of each component have to be determined. The option to account for such polydispersity was recently added to SASREF [95].

Assembly of multi domain proteins

Multi-domain proteins can be modeled from single domain structures using a SAXS profile of the whole protein. Once the linkers between the domains are added to obtain an initial full-length structure, it is possible to refine the initial model to match the SAXS profile as well as possible. For short linkers, where significant contact between the domains is expected, protein-protein docking with distance constraints to connect the domains can be used. The BUNCH program [23] is designed specifically for the multi-domain assembly task, where the domains are represented by rigid bodies and the linkers are represented by a point per residue. Simulated annealing is used to optimize the domain positions and linker conformations. Additionally, BUNCH can simultaneously fit additional profiles that correspond to domain deletion mutants.

Macromolecular assembly

Modeling of multi-subunit complexes based only on a SAXS profile of the complex is a challenging task, since ambiguous results are possible even for only two subunits (Figure 6). It is important to compute and analyze the set of all models consistent with the data, since multiple configurations can often have comparably good fits. Moreover, sampling of complex configurations is difficult, since each subunit adds six additional degrees of freedom (three rotational and three translational parameters) to the optimization problem. SASREF [23] can assemble multiple subunits using Simulated Annealing. It can simultaneously fit multiple SAXS profiles from the sub-complexes, reducing the ambiguity of the fit.

The assembly problem is further complicated by missing disordered fragments whose electron density needs to be accounted for in SAXS profile fitting. The recently developed CORAL method [95] addresses this problem by combining SASREF and BUNCH. In CORAL, distance restraints are added between the endpoints of consecutive protein domains for the sampling by Simulated Annealing. For each generated configuration, low-resolution linkers (a point per residue) are added using the RANLOGS library [95] for the calculation of a theoretical SAXS profile and the corresponding fit score.

Modeling of symmetric assemblies with cyclic (Cn) or dihedral (Dn) symmetry starting from a monomeric structure is possible with GLOBSYMM [23] that performs a brute-force search of symmetric configurations. In an integrative approach that combines stereo-chemical restraints, an atomic distance-dependent statistical potential, and a SAXS score, a symmetry term was added to the scoring function to assemble the homo-tetramer of D-xylose isomerase [24]. The FoXSDock method [90] can also be applied by replacing the pairwise global search module with SymmDock [96,97].

Integrative modeling with SAXS profiles

Due to the difficulty of determining the atomic structures of multi-subunit complexes by X-ray crystallography and NMR spectroscopy, structural characterization of these assemblies generally benefits from using varied experimental datasets. This hybrid or integrative approach involves a computational encoding of the standard scientific cycle of gathering data, proposing hypotheses, and then gathering more data to test and refine those hypotheses [32,33]. First, the information is gathered from experimental data, statistical tendencies such as atomic statistical potentials, and physical laws such as molecular mechanics force fields, and converted into a score that assesses a structural model. Second, the resolutions of the representation and the corresponding scoring function for model evaluation are selected. The resolution of the representation depends on the quantity and resolution of the available information and should be commensurate with the precision of the final ensemble of good scoring models (when a single state is determined): different parts of a model may be represented at different resolutions, and one part of the model may be represented at several different resolutions simultaneously. The scoring function evaluates whether or not a given model is consistent with the input information, taking into account the uncertainty in the information. Third, the search for models that score well is performed using any of a variety of sampling and optimization schemes. Fourth, the ensemble of good-scoring models needs to be clustered and analyzed to ascertain their precision and accuracy, and to check for inconsistent information. Analysis can also suggest what are likely to be the most informative experiments to perform in the next iteration. Integrative modeling iterates through these stages until a satisfactory model is built.

SAXS data can be easily used as part of the integrative modeling. The first stage of data collection is rapid and simple with a sufficient amount of purified sample. Moreover, it is possible to collect data for sub-complexes and then use several profiles in modeling. Multiple methods exist for scoring a given model, given a SAXS profile, both for atomic and coarse-grained representations. The open source Integrated Modeling Platform (IMP) software suite [33,98] includes support for a SAXS score based on the FoXS method for models at the atomic and coarse-grained (one point per residue) resolutions.

Since a SAXS profile provides information about the global shape of a complex, the most informative complementary datasets are related to the interface composition. Information about interface residues can come from a variety of experiments, such as NMR chemical shift perturbations (CSPs) or saturation transfer (SAT) experiments [99,100], mutational analysis, hydrogen/deuterium exchange mass spectrometry (H/DX-MS) [101], and computational interface prediction methods [102]. Data from NMR residual dipolar couplings (RDCs) [103-105] and rotational diffusion tensor [106,107] resolve the relative orientation of two molecules, while a SAXS profile can help to determine the relative translation. Distance restraints from NMR [108], cross-linking/mass spectrometry [109] and FRET experiments can be easily converted to additional modeling restraints [110]. While additional datasets can be used together with SAXS to guide the modeling, it is also possible to use them for validation of models obtained from modeling with SAXS data only.

Conclusions

Measurement by advanced instrumentation leads to more accurate SAXS profiles, requiring advanced computational methods for data interpretation. SAXS profiles are being incorporated into multiple modeling tasks, including single protein structure prediction, macromolecular assemblies modeling, characterization of flexible systems, as well as modeling of dynamics. Nevertheless, ambiguous modeling results are possible because a SAXS profile is spherically averaged at limited resolution. Thus, different models may have similar SAXS profiles all of which are consistent with the experimental profile. The integrative modeling approach that combines multiple datasets may help in discriminating among these ambiguous models.

Authors’ contributions

D.S. wrote the review jointly with SJ. K. and A.S. All authors read and approved the final manuscript.

Acknowledgements

We thank Michal Hammel for providing the data for glucose isomerase, XLF-XRCC4, and Mre11-Rad50 examples in Figures 1, 3, and 5, respectively. We are grateful to Michal Hammel, Greg Hura, John Tainer, Tsutomu Matsui, Thomas Weiss, Hiro Tsuruta, and David Agard for many discussions about SAXS-based modeling. DSD has been funded by the Weizmann Institute Advancing Women in Science Postdoctoral Fellowship. Our work on SAXS-based modeling has been supported by NIH grants R01 GM083960, U54 RR022220, and U54 GM094662, and Rinat (Pfizer) Inc. The SIBYLS beamline at Lawrence Berkeley National Laboratory is supported by the DOE program Integrated Diffraction Analysis Technologies (IDAT). We are also grateful for computer hardware gifts from Ron Conway, Mike Homer, Intel, Hewlett-Packard, IBM, and NetApp.

References

  1. Hura GL, Menon AL, Hammel M, Rambo RP, Poole FL, Tsutakawa SE, Jenney FE, Classen S, Frankel KA, Hopkins RC, et al.: Robust, high-throughput solution structural analyses by small angle X-ray scattering (SAXS).

    Nat Methods 2009, 6(8):606-612. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  2. Svergun DI: Small-angle X-ray and neutron scattering as a tool for structural systems biology.

    Biol Chem 2010, 391(7):737-743. PubMed Abstract | Publisher Full Text OpenURL

  3. Mertens HD, Svergun DI: Structural characterization of proteins and complexes using small-angle X-ray solution scattering.

    Journal of structural biology 2010, 172(1):128-141. PubMed Abstract | Publisher Full Text OpenURL

  4. Jacques DA, Trewhella J: Small-angle scattering for structural biology–expanding the frontier while avoiding the pitfalls.

    Protein science: a publication of the Protein Society 2010, 19(4):642-657. OpenURL

  5. Grant TD, Luft JR, Wolfley JR, Tsuruta H, Martel A, Montelione GT, Snell EH: Small angle X-ray scattering as a complementary tool for high-throughput structural studies.

    Biopolymers 2011, 95(8):517-530. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  6. Glatter O, Kratky O: Small angle x-ray scattering. Academic Press, London; 1982. OpenURL

  7. Koch MH, Vachette P, Svergun DI: Small-angle scattering: a view on the properties, structures and structural changes of biological macromolecules in solution.

    Q Rev Biophys 2003, 36(2):147-227. PubMed Abstract | Publisher Full Text OpenURL

  8. Putnam CD, Hammel M, Hura GL, Tainer JA: X-ray solution scattering (SAXS) combined with crystallography and computation: defining accurate macromolecular structures, conformations and assemblies in solution.

    Q Rev Biophys 2007, 40(3):191-285. PubMed Abstract | Publisher Full Text OpenURL

  9. Rambo RP, Tainer JA: Characterizing flexible and intrinsically unstructured biological macromolecules by SAS using the Porod-Debye law.

    Biopolymers 2011, 95(8):559-571. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  10. Feigin LA, Svergun DI, Taylor GW: Structure analysis by small-angle X-ray and neutron scattering. Plenum Press, New York; 1987. OpenURL

  11. Bernado P: Effect of interdomain dynamics on the structure determination of modular proteins by small-angle scattering.

    European biophysics journal: EBJ 2010, 39(5):769-780. PubMed Abstract | Publisher Full Text OpenURL

  12. Rambo RP, Tainer JA: Bridging the solution divide: comprehensive structural analyses of dynamic RNA, DNA, and protein assemblies by small-angle X-ray scattering.

    Curr Opin Struct Biol 2010, 20(1):128-137. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  13. Svergun DI: Restoring low resolution structure of biological macromolecules from solution scattering using simulated annealing.

    Biophys J 1999, 76(6):2879-2886. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  14. Franke D, Svergun DI: DAMMIF, a program for rapid ab-initio shape determination in small-angle scattering.

    Journal of Applied Crystallography 2009, 42(2):342-346. Publisher Full Text OpenURL

  15. Svergun DI, Petoukhov MV, Koch MH: Determination of domain structure of proteins from X-ray solution scattering.

    Biophys J 2001, 80(6):2946-2953. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  16. Hammel M, Rey M, Yu Y, Mani RS, Classen S, Liu M, Pique ME, Fang S, Mahaney BL, Weinfeld M, et al.: XRCC4 protein interactions with XRCC4-like factor (XLF) create an extended grooved scaffold for DNA ligation and double strand break repair.

    J Biol Chem 2011, 286(37):32638-32650. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  17. Fenton AW, Williams R, Trewhella J: Changes in small-angle X-ray scattering parameters observed upon binding of ligand to rabbit muscle pyruvate kinase are not correlated with allosteric transitions.

    Biochemistry 2010, 49(33):7202-7209. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  18. Sali A, Blundell TL: Comparative protein modelling by satisfaction of spatial restraints.

    J Mol Biol 1993, 234(3):779-815. PubMed Abstract | Publisher Full Text OpenURL

  19. Zheng W, Doniach S: Protein structure prediction constrained by solution X-ray scattering data and structural homology identification.

    J Mol Biol 2002, 316(1):173-187. PubMed Abstract | Publisher Full Text OpenURL

  20. Zheng W, Doniach S: Fold recognition aided by constraints from small angle X-ray scattering data.

    Protein Eng Des Sel 2005, 18(5):209-219. PubMed Abstract | Publisher Full Text OpenURL

  21. Dos Reis MA, Aparicio R, Zhang Y: Improving protein template recognition by using small-angle x-ray scattering profiles.

    Biophysical journal 2011, 101(11):2770-2781. PubMed Abstract | Publisher Full Text OpenURL

  22. Wells M, Tidow H, Rutherford TJ, Markwick P, Jensen MR, Mylonas E, Svergun DI, Blackledge M, Fersht AR: Structure of tumor suppressor p53 and its intrinsically disordered N-terminal transactivation domain.

    Proceedings of the National Academy of Sciences of the United States of America 2008, 105(15):5762-5767. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  23. Petoukhov MV, Svergun DI: Global rigid body modeling of macromolecular complexes against small-angle scattering data.

    Biophys J 2005, 89(2):1237-1250. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  24. Förster F, Webb B, Krukenberg KA, Tsuruta H, Agard DA, Sali A: Integration of small-angle X-ray scattering data into structural modeling of proteins and their assemblies.

    J Mol Biol 2008, 382(4):1089-1106. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  25. Perkins SJ, Bonner A: Structure determinations of human and chimaeric antibodies by solution scattering and constrained molecular modelling.

    Biochemical Society transactions 2008, 36(Pt 1):37-42. PubMed Abstract | Publisher Full Text OpenURL

  26. Nishimura N, Hitomi K, Arvai AS, Rambo RP, Hitomi C, Cutler SR, Schroeder JI, Getzoff ED: Structural mechanism of abscisic acid binding and signaling by dimeric PYR1.

    Science 2009, 326(5958):1373-1379. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  27. Bernado P, Mylonas E, Petoukhov MV, Blackledge M, Svergun DI: Structural characterization of flexible proteins using small-angle X-ray scattering.

    J Am Chem Soc 2007, 129(17):5656-5664. PubMed Abstract | Publisher Full Text OpenURL

  28. Pelikan M, Hura GL, Hammel M: Structure and flexibility within proteins as identified through small angle X-ray scattering.

    Gen Physiol Biophys 2009, 28(2):174-189. PubMed Abstract | Publisher Full Text OpenURL

  29. Hammel M: Validation of macromolecular flexibility in solution by small-angle X-ray scattering (SAXS).

    European biophysics journal: EBJ 2012.

    in press

    OpenURL

  30. Williamson TE, Craig BA, Kondrashkina E, Bailey-Kellogg C, Friedman AM: Analysis of self-associating proteins by singular value decomposition of solution scattering data.

    Biophys J 2008, 94(12):4906-4923. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  31. Kim SJ, Dumont C, Gruebele M: Simulation-based fitting of protein-protein interaction potentials to SAXS experiments.

    Biophysical journal 2008, 94(12):4924-4931. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  32. Alber F, Dokudovskaya S, Veenhoff LM, Zhang W, Kipper J, Devos D, Suprapto A, Karni-Schmidt O, Williams R, Chait BT, et al.: Determining the architectures of macromolecular assemblies.

    Nature 2007, 450(7170):683-694. PubMed Abstract | Publisher Full Text OpenURL

  33. Russel D, Lasker K, Webb B, Velazquez-Muriel J, Tjioe E, Schneidman-Duhovny D, Peterson B, Sali A: Putting the pieces together: integrative modeling platform software for structure determination of macromolecular assemblies.

    PLoS biology 2012, 10(1):e1001244. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  34. Svergun D, Barberato C, Koch MHJ: CRYSOL - a Program to Evaluate X-ray Solution Scattering of Biological Macromolecules from Atomic Coordinates.

    Journal of Applied Crystallography 1995, 28(6):768-773. Publisher Full Text OpenURL

  35. Zuo X, Cui G, Merz KM, Zhang L, Lewis FD, Tiede DM: X-ray diffraction “fingerprinting” of DNA structure in solution for quantitative evaluation of molecular dynamics simulation.

    Proceedings of the National Academy of Sciences of the United States of America 2006, 103(10):3534-3539. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  36. Tjioe E, Heller WT: ORNL_SAS: software for calculation of small-angle scattering intensities of proteins and protein complexes.

    Journal of Applied Crystallography 2007, 40(4):782-785. Publisher Full Text OpenURL

  37. Bardhan J, Park S, Makowski L: SoftWAXS: a computational tool for modeling wide-angle X-ray solution scattering from biomolecules.

    Journal of Applied Crystallography 2009, 42(Pt 5):932-943. PubMed Abstract | PubMed Central Full Text OpenURL

  38. Yang S, Park S, Makowski L, Roux B: A rapid coarse residue-based computational method for x-ray solution scattering characterization of protein folds and multiple conformational states of large protein complexes.

    Biophys J 2009, 96(11):4449-4463. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  39. Park S, Bardhan JP, Roux B, Makowski L: Simulated x-ray scattering of protein solutions using explicit-solvent models.

    J Chem Phys 2009, 130(13):134114. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  40. Stovgaard K, Andreetta C, Ferkinghoff-Borg J, Hamelryck T: Calculation of accurate small angle X-ray scattering curves from coarse-grained protein models.

    BMC Bioinformatics 2010, 11:429. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  41. Grishaev A, Guo L, Irving T, Bax A: Improved fitting of solution X-ray scattering data to macromolecular structures and structural ensembles by explicit water modeling.

    Journal of the American Chemical Society 2010, 132(44):15484-15486. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  42. Schneidman-Duhovny D, Hammel M, Sali A: FoXS: a web server for rapid computation and fitting of SAXS profiles.

    Nucleic Acids Res 2010, 38(Suppl):W540-W544. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  43. Poitevin F, Orland H, Doniach S, Koehl P, Delarue M: AquaSAXS: a web server for computation and fitting of SAXS profiles with non-uniformally hydrated atomic models.

    Nucleic acids research 2011, 39(Web Server issue):W184-W189. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  44. Virtanen JJ, Makowski L, Sosnick TR, Freed KF: Modeling the hydration layer around proteins: applications to small- and wide-angle x-ray scattering.

    Biophysical journal 2011, 101(8):2061-2069. PubMed Abstract | Publisher Full Text OpenURL

  45. Liu H, Morris RJ, Hexemer A, Grandison S, Zwart PH: Computation of small-angle scattering profiles with three-dimensional Zernike polynomials.

    Acta Crystallogr A 2012, 68(Pt 2):278-285. PubMed Abstract OpenURL

  46. Debye P: Zerstreuung von Röntgenstrahlen.

    Annalen der Physik 1915, 351(6):809-823. Publisher Full Text OpenURL

  47. Fraser RDB, MacRae TP, Suzuki E: An improved method for calculating the contribution of solvent to the X-ray diffraction pattern of biological molecules.

    Journal of Applied Crystallography 1978, 11(6):693-694. Publisher Full Text OpenURL

  48. Lattman EE: Rapid calculation of the solution scattering profile from a macromolecule of known structure.

    Proteins 1989, 5(2):149-155. PubMed Abstract | Publisher Full Text OpenURL

  49. Sampathkumar P, Ozyurt SA, Do J, Bain KT, Dickey M, Rodgers LA, Gheyi T, Sali A, Kim SJ, Phillips J, et al.: Structures of the autoproteolytic domain from the Saccharomyces cerevisiae nuclear pore complex component, Nup145.

    Proteins 2010, 78(8):1992-1998. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  50. Konarev PV, Volkov VV, Sokolova AV, Koch MHJ, Svergun DI: PRIMUS: a Windows PC-based system for small-angle scattering data analysis.

    Journal of Applied Crystallography 2003, 36(5):1277-1282. Publisher Full Text OpenURL

  51. Hammel M, Rey M, Yu Y, Mani RS, Classen S, Liu M, Pique ME, Fang S, Mahaney BL, Weinfeld M, et al.: XRCC4 protein interactions with XRCC4-like factor (XLF) create an extended grooved scaffold for DNA ligation and double strand break repair.

    The Journal of biological chemistry 2011, 286(37):32638-32650. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  52. Fiser A: Template-based protein structure modeling.

    Methods in molecular biology 2010, 673:73-94. PubMed Abstract | Publisher Full Text OpenURL

  53. Remmert M, Biegert A, Hauser A, Soding J: HHblits: lightning-fast iterative protein sequence searching by HMM-HMM alignment.

    Nature methods 2012, 9(2):173-175. OpenURL

  54. Rykunov D, Steinberger E, Madrid-Aliste CJ, Fiser A: Improved scoring function for comparative modeling using the M4T method.

    Journal of structural and functional genomics 2009, 10(1):95-99. PubMed Abstract | Publisher Full Text OpenURL

  55. Kiefer F, Arnold K, Kunzli M, Bordoli L, Schwede T: The SWISS-MODEL Repository and associated resources.

    Nucleic acids research 2009, 37(Database issue):D387-D392. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  56. Kim DE, Chivian D, Baker D: Protein structure prediction and analysis using the Robetta server.

    Nucleic acids research 2004, 32(Web Server issue):W526-W531. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  57. Zhang Y: I-TASSER server for protein 3D structure prediction.

    BMC Bioinformatics 2008, 9:40. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  58. Pieper U, Webb BM, Barkan DT, Schneidman-Duhovny D, Schlessinger A, Braberg H, Yang Z, Meng EC, Pettersen EF, Huang CC, et al.: ModBase, a database of annotated comparative protein structure models, and associated resources.

    Nucleic acids research 2011, 39(Database issue):D465-D474. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  59. Yang Z, Lasker K, Schneidman-Duhovny D, Webb B, Huang CC, Pettersen EF, Goddard TD, Meng EC, Sali A, Ferrin TE: UCSF Chimera, MODELLER, and IMP: An integrated modeling system.

    Journal of structural biology 2011, 2011: .

    in press

    OpenURL

  60. Sokolova AV, Volkov VV, Svergun DI: Prototype of a database for rapid protein classification based on solution scattering data.

    Journal of Applied Crystallography 2003, 36(3 Part 1):865-868. OpenURL

  61. Berman HM, Westbrook J, Feng Z, Gilliland G, Bhat TN, Weissig H, Shindyalov IN, Bourne PE: The Protein Data Bank.

    Nucleic acids research 2000, 28(1):235-242. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  62. Krissinel E, Henrick K: Inference of macromolecular assemblies from crystalline state.

    Journal of Molecular Biology 2007, 372(3):774-797. PubMed Abstract | Publisher Full Text OpenURL

  63. Levy ED, Pereira-Leal JB, Chothia C, Teichmann SA: 3D complex: a structural classification of protein complexes.

    PLoS computational biology 2006, 2(11):e155. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  64. Gorba C, Tama F: Normal Mode Flexible Fitting of High-Resolution Structures of Biological Molecules Toward SAXS Data.

    Bioinform Biol Insights 2010, 4:43-54. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  65. Zheng W, Tekpinar M: Accurate flexible fitting of high-resolution protein structures to small-angle x-ray scattering data using a coarse-grained model with implicit hydration shell.

    Biophysical journal 2011, 101(12):2981-2991. PubMed Abstract | Publisher Full Text OpenURL

  66. Yang S, Blachowicz L, Makowski L, Roux B: Multidomain assembled states of Hck tyrosine kinase in solution.

    Proceedings of the National Academy of Sciences of the United States of America 2010, 107(36):15757-15762. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  67. Rozycki B, Kim YC, Hummer G: SAXS ensemble refinement of ESCRT-III CHMP3 conformational transitions.

    Structure 2011, 19(1):109-116. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  68. Williams GJ, Williams RS, Williams JS, Moncalian G, Arvai AS, Limbo O, Guenther G, SilDas S, Hammel M, Russell P, et al.: ABC ATPase signature helices in Rad50 link nucleotide state to Mre11 interface for DNA repair.

    Nature structural & molecular biology 2011, 18(4):423-431. PubMed Abstract | Publisher Full Text OpenURL

  69. Kathuria SV, Guo L, Graceffa R, Barrea R, Nobrega RP, Matthews CR, Irving TC, Bilsel O: Minireview: structural insights into early folding events using continuous-flow time-resolved small-angle X-ray scattering.

    Biopolymers 2011, 95(8):550-558. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  70. Uzawa T, Kimura T, Ishimori K, Morishima I, Matsui T, Ikeda-Saito M, Takahashi S, Akiyama S, Fujisawa T: Time-resolved small-angle X-ray scattering investigation of the folding dynamics of heme oxygenase: implication of the scaling relationship for the submillisecond intermediates of protein folding.

    J Mol Biol 2006, 357(3):997-1008. PubMed Abstract | Publisher Full Text OpenURL

  71. Wu Y, Kondrashkina E, Kayatekin C, Matthews CR, Bilsel O: Microsecond acquisition of heterogeneous structure in the folding of a TIM barrel protein.

    Proc Natl Acad Sci U S A 2008, 105(36):13367-13372. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  72. Kim SJ, Matsumura Y, Dumont C, Kihara H, Gruebele M: Slowing down downhill folding: a three-probe study.

    Biophysical journal 2009, 97(1):295-302. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  73. Lindorff-Larsen K, Piana S, Dror RO, Shaw DE: How fast-folding proteins fold.

    Science 2011, 334(6055):517-520. PubMed Abstract | Publisher Full Text OpenURL

  74. Tuma R, Tsuruta H, French KH, Prevelige PE: Detection of intermediates and kinetic control during assembly of bacteriophage P22 procapsid.

    J Mol Biol 2008, 381(5):1395-1406. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  75. Lee KK, Tsuruta H, Hendrix RW, Duda RL, Johnson JE: Cooperative reorganization of a 420 subunit virus capsid.

    J Mol Biol 2005, 352(3):723-735. PubMed Abstract | Publisher Full Text OpenURL

  76. Matsui T, Tsuruta H, Johnson JE: Balanced electrostatic and structural forces guide the large conformational change associated with maturation of T = 4 virus.

    Biophysical journal 2010, 98(7):1337-1343. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  77. Vestergaard B, Groenning M, Roessle M, Kastrup JS, van de Weert M, Flink JM, Frokjaer S, Gajhede M, Svergun DI: A helical structural nucleus is the primary elongating unit of insulin amyloid fibrils.

    PLoS Biol 2007, 5(5):e134. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  78. Fowler AG, Foote AM, Moody MF, Vachette P, Provencher SW, Gabriel A, Bordas J, Koch MH: Stopped-flow solution scattering using synchrotron radiation: apparatus, data collection and data analysis.

    J Biochem Biophys Methods 1983, 7(4):317-329. PubMed Abstract | Publisher Full Text OpenURL

  79. Chen L, Wildegger G, Kiefhaber T, Hodgson KO, Doniach S: Kinetics of lysozyme refolding: structural characterization of a non-specifically collapsed state using time-resolved X-ray scattering.

    Journal of Molecular Biology 1998, 276(1):225-237. PubMed Abstract | Publisher Full Text OpenURL

  80. Perez J, Vachette P, Russo D, Desmadril M, Durand D: Heat-induced unfolding of neocarzinostatin, a small all-beta protein investigated by small-angle X-ray scattering.

    Journal of Molecular Biology 2001, 308(4):721-743. PubMed Abstract | Publisher Full Text OpenURL

  81. Ghoorah AW, Devignes MD, Smail-Tabbone M, Ritchie DW: Spatial clustering of protein binding sites for template based protein docking.

    Bioinformatics 2011, 27(20):2820-2827. PubMed Abstract | Publisher Full Text OpenURL

  82. Kundrotas PJ, Zhu Z, Vakser IA: GWIDD: Genome-wide protein docking database.

    Nucleic acids research 2010, 38(Database issue):D513-D517. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  83. Sinha R, Kundrotas PJ, Vakser IA: Protein docking by the interface structure similarity: how much structure is needed?

    PLoS ONE 2012, 7(2):e31349. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  84. Stein A, Ceol A, Aloy P: 3did: identification and classification of domain-based interactions of known three-dimensional structure.

    Nucleic acids research 2011, 39(Database issue):D718-D723. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  85. Winter C, Henschel A, Kim WK, Schroeder M: SCOPPI: a structural classification of protein-protein interfaces.

    Nucleic acids research 2006, 34(Database issue):D310-D314. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  86. Tuncbag N, Keskin O, Nussinov R, Gursoy A: Fast and accurate modeling of protein-protein interactions by combining template-interface-based docking with flexible refinement.

    Proteins 2012, 80(4):1239-1249. PubMed Abstract | Publisher Full Text OpenURL

  87. Vajda S, Camacho CJ: Protein-protein docking: is the glass half-full or half-empty?

    Trends Biotechnol 2004, 22(3):110-116. PubMed Abstract | Publisher Full Text OpenURL

  88. Lensink MF, Wodak SJ: Docking and scoring protein interactions: CAPRI 2009.

    Proteins 2010, 78(15):3073-3084. PubMed Abstract | Publisher Full Text OpenURL

  89. Pons C, D’Abramo M, Svergun DI, Orozco M, Bernado P, Fernandez-Recio J: Structural characterization of protein-protein complexes by integrating computational docking with small-angle scattering data.

    J Mol Biol 2010, 403(2):217-230. PubMed Abstract | Publisher Full Text OpenURL

  90. Schneidman-Duhovny D, Hammel M, Sali A: Macromolecular docking restrained by a small angle X-ray scattering profile.

    J Struct Biol 2011, 173(3):461-471. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  91. Gabb HA, Jackson RM, Sternberg MJ: Modelling protein docking using shape complementarity, electrostatics and biochemical information.

    Journal of molecular biology 1997, 272(1):106-120. PubMed Abstract | Publisher Full Text OpenURL

  92. Cheng TM, Blundell TL, Fernandez-Recio J: pyDock: electrostatics and desolvation for effective scoring of rigid-body protein-protein docking.

    Proteins 2007, 68(2):503-515. PubMed Abstract | Publisher Full Text OpenURL

  93. Duhovny D, Nussinov R, Wolfson HJ: Efficient Unbound Docking of Rigid Molecules. In Second International Workshop, WABI 2002. Springer Berlin/Heidelberg, Rome, Italy; 2002:185-200. OpenURL

  94. Andrusier N, Nussinov R, Wolfson HJ: FireDock: fast interaction refinement in molecular docking.

    Proteins 2007, 69(1):139-159. PubMed Abstract | Publisher Full Text OpenURL

  95. Petoukhov MV, Franke D, Shkumatov AV, Tria G, Kikhney AG, Gajda M, Gorba C, Mertens HDT, Konarev PV, Svergun DI: New developments in the ATSAS program package for small-angle scattering data analysis.

    Journal of Applied Crystallography 2012, 45(2):342-350. Publisher Full Text OpenURL

  96. Schneidman-Duhovny D, Inbar Y, Nussinov R, Wolfson HJ: Geometry-based flexible and symmetric protein docking.

    Proteins 2005, 60(2):224-231. PubMed Abstract | Publisher Full Text OpenURL

  97. Schneidman-Duhovny D, Inbar Y, Nussinov R, Wolfson HJ: PatchDock and SymmDock: servers for rigid and symmetric docking.

    Nucleic Acids Res 2005, 33(Web Server issue):W363-W367. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  98. Webb B, Lasker K, Schneidman-Duhovny D, Tjioe E, Phillips J, Kim SJ, Velazquez-Muriel J, Russel D, Sali A: Modeling of proteins and their assemblies with the integrative modeling platform.

    Methods in molecular biology 2011, 781:377-397. PubMed Abstract | Publisher Full Text OpenURL

  99. Bonvin AM, Boelens R, Kaptein R: NMR analysis of protein interactions.

    Curr Opin Chem Biol 2005, 9(5):501-508. PubMed Abstract | Publisher Full Text OpenURL

  100. Wang X, Lee HW, Liu Y, Prestegard JH: Structural NMR of protein oligomers using hybrid methods.

    Journal of structural biology 2011, 173(3):515-529. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  101. Kaveti S, Engen JR: Protein interactions probed with mass spectrometry.

    Methods in molecular biology 2006, 316:179-197. PubMed Abstract | Publisher Full Text OpenURL

  102. de Vries SJ, Bonvin AM: CPORT: a consensus interface predictor and its performance in prediction-driven docking with HADDOCK.

    PLoS ONE 2011, 6(3):e17695. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  103. McCoy MA, Wyss DF: Structures of protein-protein complexes are docked using only NMR restraints from residual dipolar coupling and chemical shift perturbations.

    Journal of the American Chemical Society 2002, 124(10):2104-2105. PubMed Abstract | Publisher Full Text OpenURL

  104. Grishaev A, Ying J, Canny MD, Pardi A, Bax A: Solution structure of tRNAVal from refinement of homology model against residual dipolar coupling and SAXS data.

    Journal of biomolecular NMR 2008, 42(2):99-109. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  105. Berlin K, O’Leary DP, Fushman D: Structural assembly of molecular complexes based on residual dipolar couplings.

    Journal of the American Chemical Society 2010, 132(26):8961-8972. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  106. van Dijk AD, Kaptein R, Boelens R, Bonvin AM: Combining NMR relaxation with chemical shift perturbation data to drive protein-protein docking.

    Journal of biomolecular NMR 2006, 34(4):237-244. PubMed Abstract | Publisher Full Text OpenURL

  107. Ryabov Y, Fushman D: Structural assembly of multidomain proteins and protein complexes guided by the overall rotational diffusion tensor.

    Journal of the American Chemical Society 2007, 129(25):7894-7902. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  108. Jehle S, Rajagopal P, Bardiaux B, Markovic S, Kuhne R, Stout JR, Higman VA, Klevit RE, van Rossum BJ, Oschkinat H: Solid-state NMR and SAXS studies provide a structural basis for the activation of alphaB-crystallin oligomers.

    Nature structural & molecular biology 2010, 17(9):1037-1042. PubMed Abstract | Publisher Full Text OpenURL

  109. Rappsilber J: The beginning of a beautiful friendship: cross-linking/mass spectrometry and modelling of proteins and multi-protein complexes.

    Journal of structural biology 2011, 173(3):530-540. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  110. Brunger AT, Strop P, Vrljic M, Chu S, Weninger KR: Three-dimensional molecular modeling with single molecule FRET.

    Journal of structural biology 2011, 173(3):497-505. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL