Although guidelines for critical appraisal of diagnostic research and meta-analyses have already been published, these may be difficult to understand for clinical researchers or do not provide enough detailed information.
Development of guidelines based on a systematic review of the evidence in reports of systematic searches of the literature for diagnostic research, of methodological criteria to evaluate diagnostic research, of methods for statistical pooling of data on diagnostic accuracy, and of methods for exploring heterogeneity.
Guidelines for conducting diagnostic systematic reviews are presented in a stepwise fashion and are followed by comments providing further information. Examples are given using the results of two systematic reviews on the accuracy of the urine dipstick in the diagnosis of urinary tract infections, and on the accuracy of the straight-leg-raising test in the diagnosis of intervertebral disc hernia.
Systematic reviews and meta-analyses of studies evaluating the accuracy of diagnostic tests (we will refer to them generically as diagnostic systematic reviews) are appearing more often in the medical literature [1,2]. Of the 26 reviews on diagnostic tests published between 1996 and 1997, 19 were systematic reviews or meta-analyses. In the field of clinical chemistry and haematology, 23 of 45 reviews published between 1985 and 1998 were systematic reviews . Although guidelines for critical appraisal of diagnostic research and meta-analyses have already been published [1,4-9], these may be difficult to understand for clinical researchers or do not provide enough detailed information.
We want to present a set of practical guidelines, based on evidence and the expertise of the Cochrane Collaboration, to facilitate understanding of and appropriate adherence to methodological principles when conducting diagnostic systematic reviews.
We reviewed reports of systematic searches of the literature for diagnostic research [10-13], methodological criteria to evaluate diagnostic research [1,4-9], methods for statistical pooling of data on diagnostic accuracy [9,14-22], and methods for exploring heterogeneity [23-27].
Guidelines for conducting diagnostic systematic reviews are presented in a stepwise fashion and are followed by comments providing further information. Examples are given using the results of two systematic reviews on the accuracy of the urine dipstick in the diagnosis of urinary tract infections, and on the accuracy of the straight-leg-raising test in the diagnosis of intervertebral disc hernia. Still, clinical readers are advised to look for assistance of a statistician when it comes to pooling.
• How to search the literature for studies evaluating the accuracy of diagnostic tests
A systematic review should include all available evidence, so a systematic and comprehensive search of the literature is needed. The reviewer has to design a search strategy based on a clear and explicit description of the subjects receiving the test of interest, the diagnostic test and its accuracy estimates, the target disease, and the study design. These elements are usually specified in the criteria for inclusion of primary studies in the review. The search will include electronic literature databases. However, because computerised databases only index a subset of all the available literature, the search should be extended using other resources (including reference checking and consultation of experts, as explained below) .
The search to identify primary studies may follow the next basic but labour-intensive steps:
1) A computer-aided search of MEDLINE (PUBMED website http://www.ncbi.nlm.nih.gov/entrez webcite, EMBASE and other databases. A search strategy begins by creating a list of database-specific keywords and text words that describe the diagnostic test and target disease of interest (subject-specific strategy). Because the number of diagnostic accuracy studies is often small, the subject-specific strategy usually yields a limited number of publications to be screened. An accurate search strategy for diagnostic publications (generic strategy) was recently published  and can be combined with the subject-specific strategy if the number of publications resulting from the latter is large. We found a combination of two published generic strategies adapted for use in PubMed (MEDLINE) to be more sensitive and precise than previously published strategies[10,12] (Table 1). Each electronic database will need to be searched using a specially designed search strategy.
Table 1. Search strategy in PubMed (MEDLINE) for publications about the evaluation of diagnostic accuracy.
2) The reference section of primary studies, narrative reviews, and systematic reviews should be reviewed to search for additional primary studies that could have been missed by the electronic search. Identification methods for systematic reviews have also been published . The MEDION database available at the University of Maastricht, the Netherlands, collects some 250 published reviews of diagnostic and screening studies. It is available through firstname.lastname@example.org and will shortly be published on the Internet.
3) Consultation of experts in the disease of interest to identify further published and unpublished primary studies. As diagnostic accuracy studies are often based on routinely collected data, publication bias may be more prevalent in diagnostic than in therapeutic research .
The first step in a literature search is the identification of relevant publications. Diagnostic research reports, older publications in particular, are often poorly indexed in the electronic databases. It is often fruitful to conduct pilot searches using the subject-specific strategy. This process is iterated after identifying and incorporating additional keywords and text words used to describe and index the retrieved reports. Studies found only on the reference sections of the retrieved reports but missed by the search strategy should be searched in the database using the articles' title or first author's name. If a study is found in the database, its keywords should be noted and added to the strategy. Citation tracking may provide additional studies. The Science Citation Index could be searched forward in time to identify articles citing relevant publications. Once the search is completed, two independent reviewers should screen the titles and abstracts of the identified citations by using specific pre-specified inclusion criteria. The inclusion criteria can be pilot tested on a sample of articles. If disagreements cannot be resolved by consensus or if insufficient information is available, a third reviewer and/or the full papers should be consulted.
• Criteria for inclusion of studies
The accuracy of a diagnostic or screening test should be evaluated by comparing its results with a 'gold standard', criterion standard or reference test accepted as the best available by content experts. The reference test may be a single test, a combination of different tests, or the clinical follow-up of patients . The publication should describe the reference test since it is a conditio sine qua non for the evaluation of a diagnostic test.
Detailed information about the participants in diagnostic research is often lacking. Participants should be defined explicitly in terms of age, gender, complaints, signs and symptoms, and their duration. At least, a definition of participants with and without the disease, as determined by the reference test, should be available. The minimal number of participants needed with and without the disease depends of the type of study, the estimates of diagnostic accuracy, and the precision used to estimate these parameters .
Information should be available to allow the construction of the diagnostic 2 by 2 table with its four cells: true positives, false negatives, false positives and true negatives.
If a review is limited to publications in certain languages, it should be reported.
As the patient mix (spectrum of disease severity) is different at different levels of care, a diagnostic review may focus on a specific setting (primary care, etc.) or include all levels. This information may be important for subgroup analyses in case of heterogeneity. If test characteristics have changed over the years as a result of changing methods or technological evolution, one may consider the inclusion of only studies that used the new version of the testing . However, as advocated for systematic reviews of trials by the Cochrane Collaboration, all published research may be included: in the analysis the association with time may be studied and explained. All evidence available should be reviewed regardless of their language of publication. It is not easy to identify non-English publications, as they are often not indexed in computerised databases. In the field of intervention research, there is some evidence of bias when excluding non-English publications . Our research on the accuracy of the urine dipstick revealed differences in the methodological validity between European and American studies, but these differences had no effect on accuracy. Although large samples are no guarantee against selective patient sampling, small samples seldom result from a consecutive series of patients or a random sample, but often constitute a convenience sample. Small samples are, therefore, very vulnerable to selection bias.
• Methodological quality
The methodological quality of each selected paper should be assessed independently by at least two reviewers. Chance-adjusted agreement should be reported and disagreements solved by consensus or arbitration. To improve agreement, reviewers should pilot their quality assessment tools in a subset of included studies or studies evaluating a different diagnostic test.
Validity criteria for diagnostic research have been published by the Cochrane Methods Group on Screening and Diagnostic Tests http://www.cochrane.org/cochrane/sadt.htm webcite, and by other authors [4-6], [8,9]. Criteria, assessing internal and external validity, should be coded and described explicitly in the review (Table 2). The internal validity criteria refer to study characteristics that safeguard against the intrusion of systematic error or bias. External validity criteria provide insight into the generalisibility of the study and judge if the test under evaluation was performed according to accepted standards. Internal and external validity criteria, describing participants, diagnostic test and target disease of interest, and study methods may be used in meta-analysis to assess the overall 'level of evidence' and in sensitivity and subgroup analyses (see Data Extraction and Data Analysis sections).
Table 2. List of validity criteria operationalised for papers reporting on the accuracy of urine dipsticks in the diagnosis of Urinary Tract Infections (UTI) or Bacteriuria
It is important to remember that studies may appear to be of poor methodological quality either because they were poorly conducted or poorly reported. Methodological appraisal of the primary studies is frequently hindered by lack of information. In these instances, reviewers may choose to contact the studies' authors or score items as 'don't know or unclear'.
A urine dipstick is usually read before the material is cultured. So, it can be interpreted that the dipstick was read without awareness of the results of the urine culture. However, the culture (reference test) may be interpreted with full awareness of the results of the dipstick. If blinding is not explicitly mentioned, reviewers may choose to score this item as 'don't know' or 'diagnostic test blinded for reference test' (implicitly scoring the reference test as not blinded). Or, the authors may be contacted for clarification.
A survey of the diagnostic literature from 1990 through 1993 in a number of peer-reviewed journals, showed that only a minority of the studies satisfied methodological standards . There is some evidence that inadequate methods may have an impact on the reported accuracy of a diagnostic test: Lijmer  screened diagnostic meta-analyses published in 1996 and 1997, and showed that the diagnostic accuracy of a test was overestimated in studies 1) with a case-control design; 2) using different reference tests for positive and negative results of the index test; 3) accepting results of observers that were unblinded to the index test results when performing the reference test; 4) that did not describe diagnostic criteria for the index test; and 5) where participants were inadequately described.
Ideally, all participants should be submitted to the same reference test. Sometimes different groups of patients are submitted to different reference tests, but details are not given. In this case, it is important to assess if the different reference tests are recognised by experts as being adequate. In some conditions results of the index test may be incorporated into the diagnostic criteria, what may lead to incorporation bias and overestimation of accuracy . Verification or work-up bias may be present if not all participants who received the index test, are referred to the reference test(s). Verification bias is present if the participants are referred according to the index test results. That is usually the case in screening studies where only subjects with positive index test results receive the reference test, so that only a positive predictive value can be calculated. Estimation of accuracy will not be possible in these studies unless complete follow-up registries are available. In case-control studies the contrast between diseased and non-diseased may be artificially sharpened by sampling only persons who are clearly diseased and persons who are completely healthy, resulting overestimated sensitivity and specificity.
• Data extraction
Two reviewers should independently extract the required information from the primary studies. Detailed information has to be extracted about the participants included in the study, time of data collection and the testing procedures. The cut-off point used in dichotomous testing and the reasons and the number of participants excluded because of indeterminate results or unfeasibility is always required.
Detailed information extracted in the case of the dipstick meta-analysis: mean age, male/female ratio, different cut-off points for leukocyte-esterase (trace, 2+, 3+), time needed for transportation, if indeterminate results were excluded, included as negative or repeated.
As the information extracted may be used in subgroup analyses and statistical pooling of the validity, possible sources of heterogeneity should be defined based on a priori existing evidence or hypotheses.
In the dipstick meta-analysis we hypothesised that the following factors may explain heterogeneity if present: procedures of collection of material for the test (method of urine collection, delay between urine collection and culture), who was executing the test and how (manually or automatic), and different brands of commercial products.
Accuracy may be presented in different ways. For the meta-analysis of dichotomous tests (see below) it is necessary to construct the diagnostic 2 × 2 table: absolute numbers in the four cells are needed. Totals of 'diseased' and 'non-diseased' participants are needed to calculate prior probability (pre-test probability), and to reconstruct the 2 × 2 table from sensitivity, specificity, likelihood ratios, predictive values or receiver-operator characteristic (ROC) curves. If possible, the 2 × 2 table should be generated for all relevant subgroups. Further information to extract includes year of publication, language of publication, and country or region of the world where the study was performed.
A standardised data extraction form may be used simultaneously with but separately from the quality assessment form. This approach facilitates data extraction and comparison between reviewers. The form has to be piloted to ensure that all reviewers interpret data in the same way. Like in other steps of the review were judgements are made, disagreements should be recorded and resolved by consensus or arbitration. Lack of details about test results or cut-off points, inconsequential rounding off of percentages, and data errors require common sense and careful data handling when reconstructing 2 × 2 tables. If predictive values are presented with sensitivity and specificity in 'diseased' and 'non-diseased' individuals, the calculation of the four cells from sensitivity and specificity can be confirmed by using the predictive values. Details can be requested from the authors of the studies, but these attempts are often unsuccessful, as the raw data may no longer be available.
In a review on the accuracy of the CAGE questionnaire for the diagnosis of alcohol abuse, sufficient data were made available of 9 only out of 22 studies selected, although the authors of the review tried to contact the original authors by all means .
• Data analysis
Whether or not meta-analysis – statistical analysis and calculation of a summary diagnostic accuracy estimate – can be conducted depends on the number and methodological quality of primary studies included and the degree of heterogeneity of their estimates of diagnostic accuracy. Because diagnostic accuracy studies are often heterogeneous and present limited information it is typically difficult to complete a meta-analysis. If heterogeneity is identified, important information is obtained from attempts to explain it. For instance, the effect that each validity criterion has on the estimates of diagnostic accuracy and the influence of a priori defined study characteristics should be explored as potential explanations of the observed study-to-study variation [23-27]. If meta-analysis is not possible or advisable, the review can be limited to a qualitative descriptive analysis of the diagnostic research available (best evidence synthesis) .
Several meta-analytic methods for diagnostic research have been published in the last decennium [14-22]. For the analysis we recommend the following steps: 1-presentation of the results of individual studies, 2-searching for the presence of heterogeneity, 3-testing of the presence of an (implicit) cut-point effect, 4-dealing with heterogeneity, 5-deciding which model should be used if statistical pooling is appropriate and 6-statistical pooling.
• Describing the results of individual studies
Reporting the main results of all included studies is an essential part of each review. It provides the reader the outcome measures and gives at a first glance insight in their heterogeneity. Each study is presented with some background information (year of publication, geographical region, number of diseased and non-diseased patients, selection of the patients, methodological characteristics) and a summary of the results. In view of the asymmetric nature of most diagnostic tests (some tests are good to exclude a disease, others to confirm), it is important to report pairs of complimentary outcome measures, i.e. at least both sensitivity and specificity, as this is necessary information for readers who would like to reproduce the systematic review. The diagnostic odds ratio (DOR) can be added, but better not alone, as a same odds ratio can relate to different combinations of sensitivity and specificity. The DOR is a measure for the discriminative power of a diagnostic test: the ratio of the odds of a positive test result among diseased to the odds of a positive test result among the non-diseased.
For more details regarding the calculation of the DOR based on the study-specific sensitivity and specificity we refer to Littenberg , Midgette  or Moses . The potential problems associated with sensitivities and specificities of 100% are solved by adding 0,5 to all cells of the diagnostic 2 × 2 table. Main outcome measures should always be reported with their 95% confidence intervals (CI).
• Searching for heterogeneity
When setting inclusion criteria, most reviewers will try to define a more or less homogeneous set of studies. Reality is however, that even then most diagnostic reviews show considerable heterogeneity in the results of included studies. When different studies have largely different results, this may result from either random error or heterogeneity due to differences in clinical or methodological characteristics of studies. A chi-square test or an extension of the Fisher's exact test for small studies  can be used to statistically test the presence of heterogeneity in study results. This may offer some guidance, but the power of this test tends to be low. A basic, but very informative method for assessing heterogeneity is to produce a graph in which the individual study-outcomes are plotted, together with their 95% confidence intervals (Figure 1), and subjectively evaluate the variation in study results.
Figure 1. Point estimates (with confidence limits) of respectively sensitivity, specificity, and diagnostic odds ratio of 11 studies on the validity of the test of Lasègue for the diagnosis of disc hernia in low back pain. Study 6 is an outlier
• Searching for the presence of an (implicit) cut-off point effect
Estimates of diagnostic accuracy differ if not all studies use the same cut-off point for a positive test result or for the reference standard. The interpretation of test results often depends on human factors (e.g. radiology, pathology, etc) or on the process of testing (e.g. clinical examination). In such cases different studies may use a different implicit cut-off point. Variation in the parameters of accuracy may be partly due to variation in cut-off points. In case of diagnostic tests with a continuous or ordinal outcome the ROC curve presents pairs of sensitivity and specificity for different values of the cut-off point of a test.
One can test for the presence of a cut-off point effect between studies by calculating a Spearman correlation coefficient between sensitivity and specificity of all included studies. If strongly negatively correlated, pairs of parameters represent the same DOR . A strong correlation between both parameters will usually result in a homogeneous logarithmic transformed DOR (lnDOR).
In a systematic review of the urine dipstick studying the accuracy of nitrites for the diagnosis of urinary tract infections , sensitivity and specificity were poorly correlated (Spearman ρ = -0.377) and highly heterogeneous in 58 studies. So was the lnDOR. Subgroup analysis of the factor 'setting of care' gave the results in Table 3.
The Spearman ρ indicates a strong cut-off effect in the family medicine studies and to a lesser degree in the emergency department studies. Despite heterogeneity of sensitivity and specificity, the pairs of sensitivity and specificity in the 6 family practice studies presented a homogeneous DOR.
Moses et al.  mention a Spearman correlation of ρ < -0.6, but evidence is still limited (see example above: a ρ of -0.4 results in a homogeneous lnDOR). The test for homogeneity of the lnDOR is described in Fleiss . If the lnDOR of the included studies are homogeneous, a Summary ROC curve (SROC) can be fitted based on the pairs of sensitivity and specificity of the individual studies (see further). If sufficient information is available also the pooling of ROC curves of individual studies will be possible.
4. Dealing with heterogeneity
• Dealing with heterogeneity
In many cases the interpretation of observed heterogeneity is the most fascinating and productive part of a meta-analysis. The inspection of the plot of sensitivity, specificity and DOR with their 95% CI may indicate the presence of outliers. In that case the reason for this situation should carefully be examined.
In the straight-leg-raising test review the plots of sensitivity and specificity showed clear heterogeneity, confirmed by statistical testing. The plot of the DOR revealed one outlier study (figure 1).
In such cases an outlier can be excluded and the analysis continued with the homogeneous group of remaining studies. Deviant results should be explored and explained. The decision to exclude outliers is complex and should be handled in the same way as in other fields of research.
Outliers can also be searched by using a Galbraith plot . To construct this plot, the standardised lnDOR = lnDOR/se is plotted (y-axis) against the inverse of the se (1/se) (x-axis). A regression line that goes through the origin is calculated, together with 95% boundaries (starting at +2 and -2 on the y-axis). Studies outside these 95% boundaries may be considered as outliers (Figure 2).
Figure 2. Galbraith plot of 11 studies on the validity of the test of Lasègue for the diagnosis of disc hernia in low back pain. Study 6 is an outlier.
Subgroup analyses defined a priori in the protocol could be conducted to detect homogeneous subgroups. Analysis of variance with the lnDOR as dependent variable and categorical variables for subgroups as factors can be used to look for differences among subgroups.
In the dipstick review, sensitivity and specificity were weakly associated (ρ = -0.337) and very heterogeneous. Subgroup analysis showed significant differences of the lnDOR between 6 different 'populations of participants'. In three populations (general population, pregnant women and surgery patients) there was a strong negative association between sensitivity and specificity (ρ = -0.539, -0.559, and -1.00 respectively), yielding homogeneous lnDOR in the three subgroups. Different SROC curves for each subgroup could be fitted (see 6.1.2) (Figure 3).
Figure 3. Summary ROC curves of nitrites in urine dipsticks for the diagnosis of bacteriuria and urinary tract infections in various homogeneous subgroups of patient populations.
If many studies are available, a more complex multivariate model can be built in which a number of study characteristics are entered as possible co-variates. Multivariate models search for the independent effect of study characteristics, adjusted for the influence of other, more powerful ones.
• Deciding on the model to be used for statistical pooling
There are two underlying models that can be used when pooling the results of individual studies.
A fixed effect model assumes that all studies are a certain random sample of one large common study, and that differences between study outcomes only result from random error. Pooling is simple. It essentially consists of calculating a weighted average of the individual study results. Studies are weighted by the inverse of the variance of the outcome parameter of test accuracy.
A random effect model assumes that in addition to the presence of random error, differences between studies can also result from real differences between study populations and procedures. The weighting factor is mathematically more complex, and is based on the work of Der Simonian and Laird, initially performed and published for the meta-analysis of trials . It includes both within-study and between-study variation.
If sensitivity and specificity are homogeneous, and if they show no (implicit) cut-off effect (see above), they can be pooled and a fixed effect model can be used. If there is evidence of a cut-off effect, SROC curves can be constructed (see below) or ROC curves can be pooled.
If heterogeneity is present, the reviewer has the following options:
1. Refrain from pooling and restrict the analysis to a qualitative overview.
2. Sub-group analysis if possible on prior factors and pooling within homogeneous sub-groups.
3. As a last resort, pooling can be performed, using methods that are based on a random effect model.
In view of the low methodological quality of most of the diagnostic studies that have been carried out, there is a tendency to advise using random effect models for the pooling of all diagnostic studies, even if there is no apparent heterogeneity.
• Statistical pooling (please see 1: appendix statistical formulae for further information)
1. Pooling of proportions
1.1. Homogeneous sensitivity and/or specificity
If fixed effect pooling can be used, pooled proportions are the average of all individual study results, weighted for the sample sizes. This is easily done by adding together all numerators and dividing the total by the sum of all denominators .
1.2. Cut-off point effect: SROC curve
The SROC curve is presented with sensitivity on the y-axis and 1-specificity on the x-axis (ROC plot). The SROC curve differs from the ROC curve in primary diagnostic research, as each study provides one value of sensitivity and one value of specificity (Figure 3). If a SROC curve can be fitted, a regression model is used, with the natural logarithm of the DOR (lnDOR) of the primary research as dependent variable and two parameters as independent variables: one for the intercept (to be interpreted as the mean lnDOR) and one for the slope of the curve (as an estimate of the variation of the lnDOR across the studies due to threshold differences). Details and formula for fitting the curve can be found in the paper presented by Littenberg and Moses . Co-variates representing different study characteristics or pre-test probabilities can be added to the model to examine any possible association of the diagnostic odds ratio with these variables . This type of analysis is usually referred to meta-regression, and refers to (multivariate) regression of the summary estimate DOR of primary research as the dependent variable, and characteristics of the included studies as independent variables. The pooled lnDOR and confidence bounds have to be back-transformed into a diagnostic odds ratio and its confidence intervals. This meta-regression model can be unweighted or weighted, using the inverse of the variance as the weighting factor. The often-negative association of the weighting factor with the lnDOR gives studies with lower discriminative diagnostic odds ratios – because of lower sensitivity and/or specificity – a larger weight. This may be a problem when comparing the pooled accuracy of different tests, and has not yet been solved [19,21].
2. Pooling of likelihood ratios
Continuous test results can be transformed into likelihood ratios obtained by using different cut-off points. Individual data-points from the selected studies can be used to calculate result-specific likelihood ratios, which can be obtained by logistic modelling. The natural log posterior odds is converted into a log likelihood ratio by adding a constant to the regression equation. The constant adjusts for the ratio of the number of 'non-diseased' to 'diseased' participants in the respective studies .
If primary studies present ordinal test results and they use the same number of categories, ROC curves can be constructed for each study and pooled as below or by using ordinal regression methods [19,45]
3. Pooling of the ROC curves
Results of diagnostic studies with a dichotomous gold standard outcome, and a test result that is reported on a continuous scale, are generally presented as a ROC curve with or without the related area under the curve (AUC) and its 95% CI. To pool such results, the reviewer has three options: to pool sensitivities and specificities for all relevant cut-off points, to pool the AUCs, or to model and pool the ROC curves themselves.
A. A pooled ROC curve and its confidence interval can be constructed on the basis of the pooled sensitivity / specificity values per cut-off point. To make this possible, sufficient raw data have to be available, which is seldom the case.
B. The AUC, like all one-dimensional measures, provides no information about the asymmetric nature of a diagnostic test. It cannot distinguish between curves with a high sensitivity at moderate values of the specificity and curves with a high specificity at moderate values of the sensitivity.
C. As ROC curves are based on ranking, they are robust with respect to inter-study shifts in the value or the meaning of cut-off points. They also provide information about the asymmetrical nature of the test information. To enable direct pooling of ROC curves, a method has been developed that requires only the published curves and the number of positive and negative participants on the gold standard test as input . The ROC curve is scanned into a graphic computer file and then converted into a series of sensitivity versus specificity data, using appropriate software or, ultimately, by hand. Subsequently, a model is fitted for each study, similar to the model that is used for producing SROC curves.
For continuous scale tests, weighted linear regression is used to estimate the parameters for each curve, including a bootstrap method to estimate the standard errors. For ordinal tests, maximum likelihood estimation yields the parameters and their standard errors .
The resulting estimates are pooled separately, using a random effect model, and the resulting model is back-transformed into a new-pooled curve with its 95% confidence band.
In addition to causing calculation problems in specific situations, pooling published ROC curves also hides the test values from the picture. Although this is not a problem when evaluating a test method, or when comparing different methods, it limits the possible use of the pooled curve for evaluating the diagnostic value of each specific test result. Moreover, a published curve can be a fitted estimate of the real curve based on the initial values, and any bias resulting from this estimation will be included in the pooled estimates.
A DOR is difficult to interpret because it is a combination of sensitivity and specificity . However, it is useful to present pooled sensitivity and specificity estimates, together with the relevant diagnostic odds ratios for different study characteristics or sub-groups (all estimates with their respective confidence intervals). To make this information accessible to clinicians, the predictive values could be obtained by using the mean prior (pre-test) probabilities of each sub-group. Alternatively, likelihood ratios could be reported so that users can calculate post-test probabilities based on the pre-test probabilities applicable to their patients.
Example taken from the dipstick review: see Table 4.
Pooled DOR (and confidence intervals) of different sub-groups can also be presented graphically on a logarithmic scale to end up with symmetric confidence intervals and to reduce the width.
Example taken from the straight-leg-raising test review. In Figure 4 the DOR and confidence boundaries are plotted on the y-axis on a logarithmic scale. Relevant study characteristics (i.e., double-blind versus single-blind studies, studies with or without verification bias) are plotted on the x-axis.
Figure 4. Sub-group analyses of the accuracy of the Lasègue's test for the diagnosis of disc hernia in low back pain. Odds ratios are pooled per sub-group.