Email updates

Keep up to date with the latest news and content from BMC Genomics and BioMed Central.

Open Access Research article

Development and validation of microsatellite markers for Brachiaria ruziziensis obtained by partial genome assembly of Illumina single-end reads

Pedro IT Silva124, Alexandre M Martins12, Ediene G Gouvea1, Marco Pessoa-Filho3 and Márcio E Ferreira1*

Author Affiliations

1 Embrapa Recursos Genéticos e Biotecnologia, Genetics Lab, PO Box 02372, Brasília, CEP 70770-917, Distrito Federal, Brazil

2 Departamento de Biologia Celular, IB - Universidade de Brasília (UnB) Campus Universitário Darcy Ribeiro, Asa Norte, Brasília, CEP 70910-900, Distrito Federal, Brazil

3 Embrapa Cerrados, PO Box 08223, Brasília, CEP 73310-970, Distrito Federal, Brazil

4 Current address: Dupont Pioneer, Palmas, Tocantins, Brazil

For all author emails, please log on.

BMC Genomics 2013, 14:17  doi:10.1186/1471-2164-14-17


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2164/14/17


Received:17 August 2012
Accepted:18 December 2012
Published:16 January 2013

© 2013 Silva et al.; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Brachiaria ruziziensis is one of the most important forage species planted in the tropics. The application of genomic tools to aid the selection of superior genotypes can provide support to B. ruziziensis breeding programs. However, there is a complete lack of information about the B. ruziziensis genome. Also, the availability of genomic tools, such as molecular markers, to support B. ruziziensis breeding programs is rather limited. Recently, next-generation sequencing technologies have been applied to generate sequence data for the identification of microsatellite regions and primer design. In this study, we present a first validated set of SSR markers for Brachiaria ruziziensis, selected from a de novo partial genome assembly of single-end Illumina reads.

Results

A total of 85,567 perfect microsatellite loci were detected in contigs with a minimum 10X coverage. We selected a set of 500 microsatellite loci identified in contigs with minimum 100X coverage for primer design and synthesis, and tested a subset of 269 primer pairs, 198 of which were polymorphic on 11 representative B. ruziziensis accessions. Descriptive statistics for these primer pairs are presented, as well as estimates of marker transferability to other relevant brachiaria species. Finally, a set of 11 multiplex panels containing the 30 most informative markers was validated and proposed for B. ruziziensis genetic analysis.

Conclusions

We show that the detection and development of microsatellite markers from genome assembled Illumina single-end DNA sequences is highly efficient. The developed markers are readily suitable for genetic analysis and marker assisted selection of Brachiaria ruziziensis. The use of this approach for microsatellite marker development is promising for species with limited genomic information, whose breeding programs would benefit from the use of genomic tools. To our knowledge, this is the first set of microsatellite markers developed for this important species.

Background

The area planted with forage crops in the tropics extends for hundreds of millions of hectares. In Brazil alone, the forage cropped land exceeds 100 M ha [1], where four brachiaria species (B. brizantha, B. decumbens, B. ruziziensis and B. humidicola) cover 85% of the cultivated pastures [2]. Only a few apomictic brachiaria clones occupy tens of millions of hectares in the country [3], what represents a high risk of genetic vulnerability for forage production. This risk could be reduced with the increased use of genetic diversity conserved in germplasm banks in order to generate recombinant genotypes in breeding programs. The development and adoption of new brachiaria cultivars with a broad genetic base is crucial for the diversification of forage pasture in the tropics. The development of new cultivars must be a dynamic process, providing the pasture production sector with increasing genetic diversity.

Among the four brachiaria species most cultivated in Brazil, ruzigrass (Brachiaria ruziziensis, 2n=2x=18) stands out as a diploid species with sexual reproduction. Polyploid brachiaria species such as B. brizantha, B. decumbens and B. humidicola typically present apomictic reproduction, a disadvantage for breeding programs that rely on sexual crosses and recombination for superior genotype selection. Ruzigrass has good forage quality, fast growth in the beginning of the rainy season and is readily adaptable to forest-crop-livestock integration systems, not only for animal feeding (green pasture or hay) but also as soil coverage for no-till farming. After tetraploidization, ruzigrass plants can be crossed with other brachiaria species, making the inter-specific introgression of genes possible. Seed production is uniform, since flowering occurs only once a year. This favors a decrease in seed production costs and an increase in seed quality. The elimination of the seed shattering trait is an essential move in enabling full domestication of B. ruziziensis, and will contribute to production of high quality seeds, turning B. ruziziensis into an essentially agricultural crop.

Ruzigrass has a relatively small genome (~600 Mbp [4]), similar to other model cereal species, such as rice (430 Mbp) and sorghum (700 Mbp). This enables genome analysis initiatives and the development of molecular tools to support breeding programs. In contrast, tetraploid brachiaria species (e.g. B. decumbens, B. brizantha) have larger and more complex genomes (> 1,600 Mbp). Therefore, ruzigrass has great potential to be used in breeding programs for pasture diversification, especially in combination with genomic tools aiding the selection of superior genotypes.

The employment of these genomic tools would favor a more dynamic development of new cultivars for this species. However, there is a lack of information about the B. ruziziensis genome. Little or nothing is known about the number of genes, distribution of gene families, abundance and diversity of retro-elements, QTL localization of traits of economic importance, genome collinearity with model species, or abundance of repetitive sequences. Genomic tools, such as molecular markers (e.g. microsatellites and SNPs), to support breeding programs are simply not available.

Traditional methods for the identification of microsatellite markers usually demand the construction of small-insert genomic libraries, colony selection by microsatellite-containing probe hybridization, sequencing of selected clones, primer design for suitable flanking regions, and assessments on the marker polymorphism by PCR analysis on a germplam sample. Later on, methods employing microsatellite-enriched genomic libraries diminished costs, time and workload necessary for marker development [5-7].

More recently, research groups have been applying next-generation sequencing technologies to generate sequence data for the genome identification of microsatellite regions and primer design [8-12]. For this purpose, both genomic DNA and genic regions (using cDNA libraries) have been used as templates for sequencing. The impact of this approach on microsatellite maker development is evident: partial genomic surveys using even fractions of a lane on next-generation sequencing machines allow the discovery of thousands of potentially amplifiable microsatellite regions which can be selected for primer design [13]. This is a promising approach for species with limited genomic information, whose breeding programs would greatly benefit from the use of genomic tools.

In brachiaria, marker development initiatives so far used microsatellite enriched libraries to obtain SSRs for the species B. brizantha[14-16] and B. humidicola[14,17,18]. In summary, around 28 markers were polymorphic in B. brizantha, and 65 in B. humidicola. These authors tested the transferability of these markers to other brachiaria species, and the rates of successful amplifications varied with the target species. At least 12 out of the 28 markers developed from B. brizantha produced amplified PCR products in B. ruziziensis DNA. Similarly, PCR products were observed on 13 out of 65 microsatellites developed from B. humidicola, when these were tested on B. ruziziensis DNA. No information on descriptive statistics such as polymorphic information content (PIC), allelic variation or heterozygosity estimates has been provided for these markers when tested on ruzigrass accessions.

In this study, we present a first set of 500 SSR markers developed for Brachiaria ruziziensis, selected from a de novo partial genome assembly of single-end Illumina reads. Descriptive statistics for 198 of these markers are provided. A set of 11 multiplex panels for the simultaneous amplification of the 30 most informative markers (ranked by their Polymorphism Information Content) is made available. These markers will be readily useful for the B. ruziziensis breeding program, aiding in areas such as germplasm characterization, construction of linkage and QTL maps, gene flow and mating system evaluation, and marker assisted selection.

Results

Number of SSR loci initially detected in the ruzigrass genome

We restricted our search for microsatellite-containing regions to perfect di- tri- and tetranucleotide motifs only. After partial de novo genome assembly, a total of 139,098 perfect microsatellite loci were detected (Table 1). In order to select loci for subsequent primer design, we looked for perfect microsatellites in contigs >200 pb with a minimum 10X coverage. This reduced the number of regions to 85,567.

Table 1. Summary of Illumina single-end read sequence data and de novo assembly; perfect di-, tri- and tetra-nucleotide SSR loci for Brachiaria ruziziensis

Most frequent motif types and repeat numbers

Tri-nucleotide repeats were the most abundant class of microsatellites (72,902 regions) detected in the partially assembled ruzigrass genome, followed by tetra-nucleotide (8,746) and di-nucleotide repeats (3,919) (Figure 1A). AG, CCG, and AAAT were the most frequent types of microsatellite sequences detected on each class (Figure 1B). The most frequent tri-nucleotide repeat motif (CCG) was particularly the most abundant one, comprising 19.8% of the perfect microsatellite regions detected on contigs with at least 10X coverage. Di- and tetra-nucleotide repeat motifs, on the other hand, had a more balanced distribution among different classes. The average number of repeats was three for tri- and tetra-nucleotides, and six for di-nucleotides.

thumbnailFigure 1. (A)Distribution of di-, tri-, and tetra-nucleotide microsatellites on contigs with a minimum 10X coverage;(B)Distribution of most frequent repeat motifs on contigs with a minimum 10X coverage.

Synthesized primer pairs

A total of 1,135 perfect microsatellite loci were detected in contigs with a minimum 100X coverage. We selected 500 loci at random for primer design and synthesis, which were given the “Brz” prefix. Additional file 1: Table S1 includes information regarding their forward and reverse primer sequences, their melting temperatures, repeat motifs, and expected product sizes. A subset of these loci was labeled with fluorescent dyes and multiplexed in order to test their efficiency on genotyping ruzigrass accessions. We tested 92 multiplex panels containing 269 primer pairs (panels contained up to three loci). Successful genotyping of 239 of these loci was achieved, while the remaining 30 loci presented either difficult interpretation of genotyping data, or absence of amplified products. However, no PCR optimization attempts were made for these loci. This represents a minimum 88.9% success rate of PCR amplification in unoptimized conditions for microsatellite loci generated from this partial de novo genome assembly. Among those 239 markers presenting coherent, interpretable amplified products, 198 (82.8%) markers were polymorphic when tested on 11 diverse African-derived ruzigrass accessions. If we consider the loss of microsatellite markers in the whole process, at least 73.60% of the 269 tested loci represent polymorphic, informative markers which can be readily applied to ruzigrass germplasm characterization and breeding. Figure 2 shows an example of electropherogram for one of the tested panels on three ruzigrass accessions.

Additional file 1. List of 500 Brz markers, including their primer sequences, melting temperatures, expected product sizes, and repeat motifs.

Format: XLS Size: 159KB Download file

This file can be viewed with: Microsoft Excel ViewerOpen Data

thumbnailFigure 2. Electropherograms of a mutiplex panel showing amplification patterns of three Brz markers(Brz0059, green; Brz0069, black; Brz0047, blue),in three ruzigrass accessions(BRA-5541-00, BRA-5550-00, and BRA-5592-00).

Descriptive statistics for each SSR marker

Genotyping of 11 ruzigrass accessions with these 198 markers detected 835 alleles. The initial database of allele frequencies in Brachiaria ruziziensis shows 8.38% of rare alleles (with a frequency < 0.05), 64.07% of intermediate alleles (0.05 < frequency < 0.30) and 27.54% of abundant alleles (frequency > 0.30). Additional file 2: Table S2 presents the descriptive statistics information regarding these polymorphic markers.

Additional file 2. Descriptive statistics for 198 polymorphic ruzigrass markers, and information on their transferability to other brachiaria species.

Format: XLS Size: 81KB Download file

This file can be viewed with: Microsoft Excel ViewerOpen Data

The number of observed alleles for all polymorphic SSR markers ranged from 2 to 12, with an average value of 4.22 alleles per locus. Their expected heterozygosity (He) values ranged from 0.09 to 0.84, with an average of 0.518. Observed heterozygosity (Ho) values ranged from 0 to 1, with an average of 0.410. The Polymorphism Information Content (PIC) values ranged from 0.09 to 0.87, with an average of 0.519.

Expected product sizes for each microsatellite marker are based on sequence information generated by the de novo assembly process. We checked whether the size ranges for the polymorphic loci included their expected product size. This was true for 70.2% of the loci (139 out of 198). The proportion of markers that generated amplicons within 10% of their expected sizes was 95.9% (190 out of 198). No markers presented amplicons 90% larger or smaller than expected.

We ranked the 30 most informative markers regarding their PIC values and assembled them into 11 multiplex panels for fast ruzigrass genotyping. The average PIC value for the 30 markers was 0.803, varying from 0.74 to 0.87. Table 2 shows these panels and markers and their respective primer sequences and descriptive statististics.

Table 2. A set of 11 multiplex panels including the 30 most informative ruzigrass microsatellite markers

Transferability to other brachiaria species

A survey on the potential transferability of microsatellite markers generated for ruzigrass to other brachiaria species showed that 90.9% of the 198 polymorphic markers presented amplified PCR products on Brachiaria brizantha cv. Marandu, 67.7% on B. brizantha cv. Piatã, and 87.9% on B. brizantha cv. Xaraés. The percentage of potentially transferable markers to B. decumbens cv. Basilisk was 92.9%. Finally, for Brachiaria humidicola cv. Tupi, only 42.9% of 198 markers showed amplified PCR products.

Discussion

A true revolution is taking place on our ability to identify and develop microsatellite markers either for breeding, germplasm characterization, or conservation. The steady decrease in costs for obtaining next-generation sequencing data has made possible for research groups with access to an NGS facility to put a new model of microsatellite development to the test.

Most of the first published papers reporting the use of next-generation sequencing technologies for the development of microsatellite markers used either shotgun pyrosequencing of genomic DNA [8-12], or of enriched libraries [19]. Illumina sequencing was first applied to transcriptome sequencing and assembly, followed by the detection of genic SSR markers [20,21]. Castoe et al. [13] tested the use of Illumina paired-end reads of genomic DNA, without enrichment or assembly of reads, to detect potentially amplifiable microsatellite loci on three different organisms. This approach was also used by O’Bryhim et al. [22] to develop microsatellite markers on an endangered scaleshell species. Castoe’s work does not present any data on the test of synthesized primer pairs. O’Bryhim’s paper reports the test of 48 primer pairs, 16 of which were polymorphic.

We show that reads from an Illumina single-end run, when assembled de novo with high levels of stringency, are also suitable for the identification of microsatellite regions. Even though we haven’t tested Castoe’s scripts to detect potentially amplifiable loci from unassembled reads, we believe the assembly process adds a consistent level of sequence quality. That increases the chance of finding good-quality flanking regions for which primer pairs can be designed.

Squirrel et al. [23] used the term “attrition rate” to describe the loss of loci at each step of microsatellite marker development. For traditional projects - which include the construction of clone libraries, the sequencing of clones, microsatellite identification, primer design, and PCR - their estimate based on a review of published papers showed that, on average, 83% of the sequenced clones would be lost due to problems in different steps of the development process.

The application of this criterion to measure how much effort is necessary to develop functional, polymorphic microsatellite markers using genome surveys based on next-generation sequencing depends on the definition of what initial count is used. In our case, depending on the imposed stringency on contig coverage, our initial number of potentially useful, perfect microsatellite markers ranged from 139,098 to 85,567 (at least 10X contig coverage), and finally to 1,135 (100X coverage). If we chose the most stringent parameter, we would expect that from our 1,135 microsatellite-containing sequences, 729 would be suitable for primer synthesis (46% of mean attrition rate on this step), and 365 would be polymorphic (50% mean attrition rate). If we only consider that final step, the expected number of functional polymorphic markers from our set of tested primer pairs would be 135 (starting with our 269 loci). Our observed number of polymorphic markers was higher, 198 of our 269 tested primer pairs were polymorphic (73.6%).

We could apply the attrition rate estimates published by Squirrel et al. to answer one more question: given our final set of functional polymorphic microsatellite loci, how much effort would be necessary in previous steps of marker development if we were using a traditional clone library approach? The answer is that in order to obtain 198 functional polymorphic loci, 1,146 clones from an enriched library would have to be sequenced, 733 microsatellites would have to be identified, and 396 primer pairs would have to be synthesized and tested.

It is obvious that when comparing these estimates, factors such as the abundance of microsatellite regions on the genome of interest are taken for granted. For practical purposes, a more useful comparison would be that between a clone library sequencing method and a next-generation sequencing method on the same organism. In this case, not only the final number of useful markers would be considered, but also costs, time and laboratory workload. Santana et al. [19] have done that for the fungus Fusarium circinatum, a pine pathogen. While a single 454 run using pooled ISSR-PCR products detected 231 potentially amplifiable microsatellites (out of 1,692 contigs and singletons), Sanger sequencing of 100 clones containing ISSR-PCR fragments allowed the detection of 8 potentially amplifiable sequences.

We can compare our effort with previous microsatellite development initiatives for other brachiaria species. In B. brizantha[15], 96 clones from an enriched library were sequenced, 19 primer pairs were designed and tested, and 13 of those were polymorphic. A new set of 15 polymorphic primers for this species was published by Vigna et al. [16], using the same enriched library. For B. humidicola, 384 clones were sequenced, 38 primer pairs were tested, and 27 were polymorphic [17]. A new set of 40 primer pairs was tested by Vigna et al. [18], 38 of which were polymorphic. No microsatellite markers had been developed so far for Brachiaria ruziziensis.

It seems, therefore, that the detection and development of microsatellite markers from genome assembled Illumina single-end DNA sequences is highly efficient. This approach should be especially considered for species with limited genomic information.

The need for further germplasm collection expeditions to increase the genetic diversity of B. ruziziensis kept in germplasm banks should also be mentioned. It was observed that roughly 30% of the expected allele sizes were not detected on the 11 ruzigrass accessions genotyped in this study. Since the plant used to generate the single-end sequences is derived from a self-pollinated plant collected in the field in Brazil, this data indicates that there is genetic variation in ruzigrass that is out of the allele variation boundaries observed in the analyis of the 11 African-derived genotypes used in this experiment. It is possible that new germplasm collection initiatives in pastures established in the 1960-1970’s in Brazil will identify accessions with useful genetic diversity for ruzigrass breeding programs.

Finally, although we consider the data on transferability of ruzigrass microsatellite markers to other brachiaria species rather preliminary, the higher proportion of successful PCR amplifications on B. brizantha and B. decumbens cultivars indicates a closer phylogenetic distance between these species and B. ruziziensis, when compared with B. humidicola.

Conclusions

We show that the detection and development of microsatellite markers from genome assembled Illumina single-end DNA sequences is highly efficient. The developed markers are readily suitable for genetic analysis and marker assisted selection of Brachiaria ruziziensis. The use of this approach for microsatellite marker development is promising for species with limited genomic information, whose breeding programs would benefit from the use of genomic tools. To our knowledge, this is the first set of microsatellite markers developed for this important species.

Methods

Sequencing and de novo partial assembly of the B. ruziziensis genome

B. ruziziensis genome sequencing was performed with DNA extracted from a self-pollinated plant (FSS-1 clone), in order to increase homozygosity and, as a consequence, facilitate the de novo genome assembly. Sequencing was performed from a genomic DNA fragment library, amplified by cluster generation by bridge PCR, allowing the massive parallel sequencing by synthesis in an Illumina GAII sequencer. Assembly routines were performed on CLC Genomics Workbench software (CLC Bio, Aarhus, Denmark). An assembly mapping was obtained after removing of Illumina adapters and low quality sequences using the CLC trimmer function (default limit = 0.05). The assembly procedure used the parameters Length Fraction (LF) and Sequence Similarity (SIM) between DNA reads, as described by the CLC Genomics Workbench software, with maximum stringency (0.50 LF and 0.80 SIM). The minimum contig length parameter was set to 70 bp.

Selection criteria for microsatellite loci in B. ruziziensis

Microsatellite sequence discovery was carried with Phobos [24]. Initially, we searched for di-, tri-, and tetra-nucleotide loci with perfect repeat motifs on assembled contigs with at least 10X coverage. This allowed a preliminary survey of the most frequent types of repeat motifs on the assembled genome, and the number of repeat motifs for the detected loci. A dataset with contigs >200 bp was then used to map the reads using maximum stringency (100% LF and 100% SIM), in order to minimize the error of consensus sequences while improving the coverage of conserved sequences. With this procedure, the average length of resulting contigs was increased. Perfect microsatellites which occurred in the contigs greater than 200 bp and with coverage above 10x could be recovered using Phobos. A final set of 500 microsatellites with minimum 100x coverage was then selected for analysis and validation (Additional file 1: Table S1). The microsatellite containing sequences received the GeneBank accession numbers KC181352 - KC181851.

In order to test some of these loci on Brachiaria ruziziensis germplasm, primer pairs were designed with Primer3Plus [25]. From the initial list of detected microsatellites, we generated a subset of loci which were present on contigs with at least 100X coverage. Two hundred and seventy primer pairs were designed (240 di-nucleotides, 20 tri-nucleotides, and 10 tetra-nucleotides). Fluorescent labels were added to the forward oligos of each primer pair so that multiplexing and genotyping would be performed on an automated DNA sequencer.

Plant material for SSR genotyping

We tested the synthesized primer pairs on eleven ruzigrass samples - ten accessions from the Embrapa Germplasm Collection and one cultivar (Kennedy). The ruzigrass accessions were selected for this study based on their expected high genetic diversity, since they are progenies of original germplasm accessions collected in the 1980’s in different countries of Africa, where B. ruziziensis is endemic [26]. Seeds were germinated and DNA was extracted using a standard CTAB protocol [27] with modifications, as described in [28]. Leaves from five cultivars of other Brachiaria species were also collected and had their DNA extracted. These were cultivars Marandu, Piatã and Xaraés (Brachiaria brizantha), cultivar Basilisk (Brachiaria decumbens) and cultivar Tupi (Brachiaria humidicola), all of them registered for commercial cultivation in Brazil. They were genotyped in order to test the transferability of SSR markers designed for B. ruziziensis to commercially important polyploid Brachiaria species. DNA concentrations were measured on a Nanodrop 2000 spectrophotometer (Thermo Scientific, USA), and samples were diluted on TE buffer pH 8.0 to a concentration of 2 ng/μL.

Genotyping using multiplex panels of SSR markers

Multiplex panels were designed using Multiplex Manager [29]. They included up to three loci per panel, and all loci in each panel had the same microsatellite repeat motif size. PCR’s were carried in a final volume of 5 μL containing 2 ng of genomic DNA, 1X QIAGEN Multiplex PCR Kit Master Mix (QIAGEN), 0.5X Q-Solution (QIAGEN), and 0.2 μM of each primer. Reactions were performed on a Veriti™ Thermal Cycler (Applied Biosystems, USA) using the following amplification program: 95°C for 15 minutes; 30 cycles at 94°C for 30 seconds, 52°C for 90 seconds, and 72°C for 60 seconds; a final extension step at 60°C for 60 minutes. PCR products were diluted with an equal volume of Milli-Q water, added 10 μL of Hi-Di™ Formamide (Applied Biosystems, USA), a ROX-labeled internal size standard, and denatured at 94°C for 5 minutes. Denatured products were injected on an ABI 3730 (Applied Biosystems, USA) automated sequencer. Allele size calling and genotyping were carried with the GeneMapper® Software v4.1 (Applied Biosystems, USA). Automated allelic binning was performed with AlleloBin http://www.icrisat.org/bt-software-d-allelobin.htm webcite, which is based on an algorithm described in [30]. PowerMarker v. 3.25 [31] was used to generate a table of summary statistics for all loci, as well as a database of allelic frequencies.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

PITS and AMM prepared genomic libraries, worked on genome assembly, detection of microsatellite sequences, primer design, and multiplex panel development. EGG genotyped ruzigrass accessions with microsatellite markers, analyzed genotyping data and performed statistical analyses. MPF helped analyze genotyping data, performed statistical analyses, selected loci for multiplex panels and drafted the manuscript. MEF conceived of and surpervised the study, performed statistical analyses and helped to draft the manuscript. All authors read and approved the final manuscript.

Acknowledgements

We would like to thank Fausto Souza Sobrinho, Claudio Takao Karia and Marcelo Ayres Carvalho for providing the Brachiaria accessions used in this work. This research was sponsored by EMBRAPA Macroprograma 2 – Grant # 02.12.02.002.00.00.

References

  1. de Lima M, Pessoa M, Neves M, de Carvalho E: Emissões de metano por fermentação entérica e manejo de dejetos de animais. In Segundo inventário brasileiro de emissões e remoções antrópicas de gases de efeito estufa. Ministério da Ciência e Tecnologia, Brasília; 2012:120. OpenURL

  2. Barcellos AO, Vilela L, Lupinacci AV: Produção animal e pasto: desafios e oportunidades. In Encontro Nacional do Boi Verde - A Pecuária Sustentável: 2001. Sindicato Rural de Uberlândia, Uberlândia; 2001:29-64. OpenURL

  3. Barbosa RA: Morte de pastos de braquiárias. Embrapa Gado de Corte, Campo Grande; 2006. OpenURL

  4. Ishigaki G, Gondo T, Ebina M, Suenaga K, Akashi R: Estimation of genome size in Brachiaria species.

    Grassl Sci 2010, 56(4):240-242. Publisher Full Text OpenURL

  5. Billotte N, Lagoda PJL, Risterucci AM, Baurens FC: Microsatellite-enriched libraries: applied methodology for the development of SSR markers in tropical crops.

    Fruits 1999, 54(4):277-288. OpenURL

  6. Ostrander EA, Jong PM, Rine J, Duyk G: Construction of small-insert genomic DNA libraries highly enriched for microsatellite repeat sequences.

    Proceedings Of The National Academy Of Sciences Of The United States Of America 1992, 89(8):3419-3423. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  7. Paetkau D: Microsatellites obtained using strand extension: an enrichment protocol.

    Biotechniques 1999, 26(4):690-692.

    694–697

    PubMed Abstract OpenURL

  8. Abdelkrim J, Robertson B, Stanton J-A, Gemmell N: Fast, cost-effective development of species-specific microsatellite markers by genomic sequencing.

    Biotechniques 2009, 46(3):185-192. PubMed Abstract | Publisher Full Text OpenURL

  9. Castoe TA, Poole AW, Gu W, de Koning AP J, Daza JM, Smith EN, Pollock DD: Rapid identification of thousands of copperhead snake (Agkistrodon contortrix) microsatellite loci from modest amounts of 454 shotgun genome sequence.

    Mol Ecol Resour 2010, 10(2):341-347. PubMed Abstract | Publisher Full Text OpenURL

  10. Csencsics D, Brodbeck S, Holderegger R: Cost-effective, species-specific microsatellite development for the endangered Dwarf Bulrush (Typha minima) using next-generation sequencing technology.

    J Hered 2010, 101(6):789-793. PubMed Abstract | Publisher Full Text OpenURL

  11. Tangphatsornruang S, Somta P, Uthaipaisanwong P, Chanprasert J, Sangsrakru D, Seehalak W, Sommanas W, Tragoonrung S, Srinives P: Characterization of microsatellites and gene contents from genome shotgun sequences of mungbean (Vigna radiata (L.) Wilczek).

    BMC Plant Biol 2009, 9:137. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  12. Zhu H, Senalik D, McCown BH, Zeldin EL, Speers J, Hyman J, Bassil N, Hummer K, Simon PW, Zalapa JE: Mining and validation of pyrosequenced simple sequence repeats (SSRs) from American cranberry (Vaccinium macrocarpon Ait.).

    Theor Appl Genet 2012 Jan, 124(1):87-96. Publisher Full Text OpenURL

  13. Castoe TA, Poole AW, de Koning APJ, Jones KL, Tomback DF, Oyler-McCance SJ, Fike JA, Lance SL, Streicher JW, Smith EN, et al.: Rapid microsatellite identification from illumina paired-end genomic sequencing in two birds and a snake.

    PLoS One 2012, 7(2):e30953. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  14. Cançado LJ: Caracterização da diversidade genética molecular em germoplasma de Brachiaria spp. Universidade Estadual de Campinas, Campinas; 2009. PubMed Abstract | Publisher Full Text OpenURL

  15. Jungmann L, Sousa ACB, Paiva J, Francisco PM, Vigna BBZ, do Valle CB, Zucchi MI, DE Souza AP: Isolation and characterization of microsatellite markers for Brachiaria brizantha (Hochst. ex A. Rich.) Stap.

    Conserv Genet 2009, 10(6):1873-1876. Publisher Full Text OpenURL

  16. Vigna BBZ, Jungmann L, Francisco PM, Zucchi MI, Valle CB, Souza AP: Genetic diversity and population structure of the Brachiaria brizantha germplasm.

    Tropical Plant Biology 2011, 4(3–4):157-169. OpenURL

  17. Jungmann L, Vigna BBZ, Paiva J, Sousa ACB, do Valle CB, Laborda PR, Zucchi MI, DE Souza AP: Development of microsatellite markers for Brachiaria humidicola (Rendle) Schweick.

    Conserv Genet Resour 2009, 1(1):475-479. Publisher Full Text OpenURL

  18. Vigna BB, Alleoni GC, Jungmann L, do Valle CB, de Souza AP: New microsatellite markers developed from Urochloa humidicola (Poaceae) and cross amplification in different Urochloa species.

    BMC research notes 2011, 4:523. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  19. Santana Q, Coetzee M, Steenkamp E, Mlonyeni O, Hammond G, Wingfield M, Wingfield B: Microsatellite discovery by deep sequencing of enriched genomic libraries.

    Biotechniques 2009, 46(3):217-223. PubMed Abstract | Publisher Full Text OpenURL

  20. Garg R, Patel RK, Tyagi AK, Jain M: De novo assembly of chickpea transcriptome using short reads for gene discovery and marker identification.

    DNA research: an international journal for rapid publication of reports on genes and genomes 2011, 18(1):53-63. Publisher Full Text OpenURL

  21. Wei W, Qi X, Wang L, Zhang Y, Hua W, Li D, Lv H, Zhang X: Characterization of the sesame (Sesamum indicum L.) global transcriptome using Illumina paired-end sequencing and development of EST-SSR markers.

    BMC Genomics 2011, 12:451. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  22. O'Bryhim J, Chong JP, Lance SL, Jones KL, Roe KJ: Development and characterization of sixteen microsatellite markers for the federally endangered species: Leptodea leptodon (Bivalvia: Unionidae) using paired-end Illumina shotgun sequencing.

    Conservation Genetics Resources 2012, 4(3):787-789. Publisher Full Text OpenURL

  23. Squirrell J, Hollingsworth P, Woodhead M, Russell J, Lowe A, Gibby M, Powell W: How much effort is required to isolate nuclear microsatellites from plants?

    Mol Ecol 2003, 12(6):1339-1348. PubMed Abstract | Publisher Full Text OpenURL

  24. Mayer C:

    Phobos. 2006–2010. [3.3.11 edn] OpenURL

  25. Untergasser A, Nijveen H, Rao X, Bisseling T, Geurts R, Leunissen JAM: Primer3Plus, An enhanced web interface to Primer3.

    Nucleic Acids Res 2007, 35(Web Server issue):W71-W74. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  26. Keller-Grein G, Maas BL: Natural variation in Brachiaria and existing germplasm collections. In Brachiaria: biology, agronomy and improvement. Edited by Miles J, Maas BL, Valle CB. CIAT, Cali; 1996:16-42. OpenURL

  27. Doyle JJ, Doyle JL: A rapid DNA isolation procedure for small quantities of fresh leaf tissue.

    Phytochemical Bulletin 1987, 19(1):11-15. OpenURL

  28. Ferreira ME, Grattapaglia D: Introdução ao uso de marcadores moleculares em análise genética. Embrapa-SPI, Brasilia; 1998. PubMed Abstract OpenURL

  29. Holleley CE, Geerts PG: Multiplex Manager 1.0: a cross-platform computer program that plans and optimizes multiplex PCR.

    Biotechniques 2009, 46(7):511-517. PubMed Abstract | Publisher Full Text OpenURL

  30. Idury RM, Cardon LR: A simple method for automated allele binning in microsatellite markers.

    Genome Res 1997, 7(11):1104-1109. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  31. Liu K, Muse SV: PowerMarker: an integrated analysis environment for genetic marker analysis.

    Bioinformatics 2005, 9(21):2128-2129. OpenURL