Email updates

Keep up to date with the latest news and content from BMC Evolutionary Biology and BioMed Central.

Open Access Highly Accessed Research article

Functional constraints on tooth morphology in carnivorous mammals

Peter D Smits* and Alistair R Evans

Author Affiliations

Department of Biological Sciences, Monash University, Melbourne, VIC, 3800, AUS

For all author emails, please log on.

BMC Evolutionary Biology 2012, 12:146  doi:10.1186/1471-2148-12-146


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2148/12/146


Received:24 April 2012
Accepted:27 July 2012
Published:16 August 2012

© 2012 Smits and Evans.; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

The range of potential morphologies resulting from evolution is limited by complex interacting processes, ranging from development to function. Quantifying these interactions is important for understanding adaptation and convergent evolution. Using three-dimensional reconstructions of carnivoran and dasyuromorph tooth rows, we compared statistical models of the relationship between tooth row shape and the opposing tooth row, a static feature, as well as measures of mandibular motion during chewing (occlusion), which are kinetic features. This is a new approach to quantifying functional integration because we use measures of movement and displacement, such as the amount the mandible translates laterally during occlusion, as opposed to conventional morphological measures, such as mandible length and geometric landmarks. By sampling two distantly related groups of ecologically similar mammals, we study carnivorous mammals in general rather than a specific group of mammals.

Results

Statistical model comparisons demonstrate that the best performing models always include some measure of mandibular motion, indicating that functional and statistical models of tooth shape as purely a function of the opposing tooth row are too simple and that increased model complexity provides a better understanding of tooth form. The predictors of the best performing models always included the opposing tooth row shape and a relative linear measure of mandibular motion.

Conclusions

Our results provide quantitative support of long-standing hypotheses of tooth row shape as being influenced by mandibular motion in addition to the opposing tooth row. Additionally, this study illustrates the utility and necessity of including kinetic features in analyses of morphological integration.

Keywords:
Three-dimensional reconstruction; Carnivora; Dasyuromorphia; Ecomorphology; Integration

Background

The evolution of morphology is limited by the complex interactions of various selection pressures and constraints, which can be extremely difficult to quantify [1]. In the context of functional processes, morphological constraints are due to interactions within and between different structures and both biotic and abiotic selection pressures [2-4]. A classical example is scaling in animals where traits such as femur diameter increase non-isometrically with mass because fundamental physical forces prevent certain morphologies from being adaptively feasible. Functional constraints on morphology are not limited to scaling, but may be caused by a wide range of interactions such eye structure and nocturnality [5], flight cost in relation to weather [6], shell shape and marine habitat [7,8], skull shape and bite force [9-11], among many others.

Morphological integration is both a cause and product of constraint and refers to how certain structures vary more closely with each other than with other structures because of various constraints [12,13], based on either a priori or a posteriori biological hypotheses [14]. Integration, in this sense, can be thought of as a biotic selection mechanism, where morphology is constrained by the complex interaction of many different features. Identifying strongly integrated features and the patterns of this integration has been a very active field of research [15] and systems ranging from insect wings [16,17] and mammal mandibles [18,19], to trilobites [20-22] have all been analyzed under various contexts. Methodologically, many studies have focused on static morphological features and defined patterns of integration based on correlation within and among structures. In this study, we use a combination of static and kinetic features to understand integration in carnivore teeth and mandibular movement. The combination of static and kinetic measures has not previously been used in studies of integration and provides a new and powerful approach to understanding functional morphology.

Teeth

Opposing mammalian teeth interact in a very precise manner, with specific tooth features occluding with each other, and the molars of mammals have specialized shapes related to diet [23,24]. The complexity of the constraints on tooth morphology is not well understood. There has been extended speculation about the relationship between tooth row shape and mandibular movement. Ryder [25] suggested a relationship between occlusal shape and the relative amount of lateral translation of the mandible. Simpson [26] hypothesized that the amount of ventral and/or lateral movement plays an important role in controlling tooth shape. Here, we quantify whether the addition of measures of mandibular motion is necessary to better statistically model the effect of opposing tooth rows upon their shape. With the advent of three dimensional methods for analyzing morphology and application of model selection methods, it is possible to compare the integration of static and kinetic features and determine if a more complex hypothesis is appropriate for understanding tooth row shape.

Because Carnivora have a highly variable number of molars and Dasyuromorphia consistently have four molars (Figure 1), homology-based methods are inappropriate. Recently, an homology free measure of tooth row complexity has been developed [24] which allows for comparisons among tooth rows of varying length. This measure, called orientation patch count (OPC), is calculated from three-dimensional tooth surfaces. It is the sum of the number of orientation-delimited surfaces on the tooth row (Figure 1). Low OPC values correspond with faunivory while high OPC values with herbivory. OPC has been used to quantify variation in dental complexity for Carnivora and Rodentia [24], plesiadapids [27], primates [28], bats [29], and multituberculates [30].

thumbnailFigure 1 . Comparison of upper and lower tooth rows in Carnivora and Dasyuromorphia. 3-dimensional renderings of upper tooth rows of Vulpes vulpes (A) and Dasyurus geoffroii (B) and lower tooth rows (C, D). Scale spheres are 1 mm in diameter.

While OPC is a quantification of the complexity of a tooth row, it is not a statement of the direction of occlusion for the tooth row and there has been no evidence to indicate that tooth row complexity is related to occlusal direction or mandible motion. While it is logical that opposing tooth row complexities of a taxon would be highly correlated [24] it is unknown whether some measure of mandibular motion in addition to the opposing tooth row shape allows for a more informative explanation of tooth row shape. We may expect that as tooth row complexity increases, jaw movement would need to change to ensure effective use of the change in tooth shape. Additionally, it is unknown if upper or lower tooth rows have different explanatory relationships with the opposing tooth row and mandibular motion. This uncertainty reveals multiple hypotheses which cannot be eliminated a priori.

Carnivora and Dasyuromorphia are good systems for comparing hypotheses about similarities in tooth shape and movement during occlusion because of ecological similarities, gross morphological differences and because mandibular movement is constrained to being only rotation and mediolateral translation with extremely limited anteroposterior movement. In this study, we compare biological hypotheses of tooth-mastication integration in carnivorous mammals. Statistical models of tooth row OPC as a response solely to opposing tooth row OPC may be the most parsimonious explanation of tooth row shape, which would mean that jaw movement does not affect the correlation between upper and lower tooth complexity. If tooth row shape is best explained by not only the opposing tooth row but also some measure of motion during occlusion, then tooth row shape is constrained by a suite of features and not just the opposing tooth row. Operating under the assumption that mandibular motion, as controlled by specific muscle action, is at least a partially heritable trait because of the limitations imposed by the organism’s musculoskeletal system this result would suggest integration of static and kinetic cranial features.

Methods

Specimens

16 species of Carnivora and 8 species of Dasyuromorphia were sampled, with a total of 34 specimens (20 and 14 specimens respectively; Table 1). Eight of these specimens were sampled previously [31] but were reanalyzed for this study. Specimens for this study were obtained from the Monash University Zoology Teaching Collection (MUZ), Museum Victoria (NMV), Finnish Museum of Natural History (FMNH), Swedish Museum of Natural History (SMNH), and the Museum für Naturkunde (ZMB). Specimens were chosen to reflect the taxonomic breadth of the two orders and for relatively unworn, complete upper and lower tooth rows. When possible, two specimens were sampled of each species.

Table 1. Specimens and measurements

Three-dimensional scanning

Specimens were scanned with a Laser Design DS 2025 3D scanner with a RPS-120 probe (Laser Design Inc., Minneapolis, MN) scanning at 620 nm wavelength. Upper and lower tooth rows from the same side of the jaw were scanned. Additionally, as in Evans and Fortelius [31], the articular surface of the squamosal bone (glenoid fossa) and dentary condyle were also scanned. The tooth row surfaces and dentary-squamosal joint are usually sufficient to determine occlusal path in carnivorous mammals [31,32]. Tooth and condyle surfaces were coated with a light layer of talc or ammonium chloride (NH4Cl) to aid scanning.

Depending on the size of the specimen, specimens were scanned at resolutions ranging from 50 μm to 10 μm. Tooth rows were saved as point cloud files, which were imported into Geomagic 12 (Geomagic Inc., North Carolina, USA 2010) and extraneous information was reduced using custom macros (available in Supplementary Information). Point clouds were aligned and then combined. Following this, each point cloud was transformed into a polygon surface at a triangle size greater than point cloud spacing by approximately 5 μm.

Mandibular movement

To manipulate the surface reconstruction in three dimensions and simulate the chewing sequence, surface polygon files were exported as PLY (Stanford Triangle Format) files. The PLY files for the mandible and skull were then imported into Blender v. 2.5 (The Blender Foundation, 2011) where they were positioned as in life. The dentary condyle was placed in the glenoid fossa and the mandible was positioned with protocones of the upper molars placed in the talonid basins of the lower molars (i.e. centric occlusion). The mediolateral axis through the center of the dentary condyle acted as the center of rotation during chewing, remaining stationary in the sagittal plane. In life, synovial joint tissue is present between the bones, so the condyle was positioned with a small space between it and the glenoid fossa.

To simulate the process of occlusion, we used techniques described in Evans and Fortelius [31]. Included here is a brief description of this method. The skull was held in place while the mandible was dorsoventrally rotated and mediolaterally translated until the upper and lower teeth first touch. The mandible was continually rotated dorsally, with the teeth moving across each other until centric occlusion was again reached. As the mandible rotates dorsally the lower tooth row intersects the upper tooth row, so the jaw was medially translated until the two tooth rows were only tangentially in contact. An example reconstruction for Sarcophilus harrisii is included as Additional files 1, 2, and 3. As stated above, carnivorous mammals are ideal for this method of reconstruction because the precise occlusion of the upper and lower tooth rows and rotation is constrained to being only at the dentary-squamosal jaw joint. Because of this, mandibular motion is constrained in the anteroposterior and dorsoventral axes increasing the ease of reconstruction.

thumbnailAdditional file 1. S_harrisii_circle.avi avi [http://www.videolan.org/vlc/ webcite] Reconstructed occlusion of Sarcophilus harrisii. Movie of three-dimensionally reconstructed occlusion in Sarcophilus harrisii. Upper tooth row and skull are yellow, lower tooth row and mandible are blue.

Format: AVI Size: 1.7MB Download file | Watch movieOpen Data

thumbnailAdditional file 2. S_harrisii_condyle.avi avi [http://www.videolan.org/vlc/ webcite] Dentary condyle of Sarcophilus harrisii during occlusion. Movie of lateral movement of dentary condyle during occlusion in Sarcophilus harrisii. Skull is yellow, mandible is blue.

Format: AVI Size: 4.9MB Download file | Watch movieOpen Data

thumbnailAdditional file 3. S_harrisii_teeth.avi avi [http://www.videolan.org/vlc/ webcite] Sarcophilus harrisii teeth during occlusion. Three-dimensionally reconstructed occlusion in Sarcophilus harrisii. Upper tooth row and skull are yellow, lower tooth row and mandible are blue.

Format: AVI Size: 2.6MB Download file | Watch movieOpen Data

Four measures were taken for each specimen to quantify mandibular motion: distance of mediolateral translation by mandible (lateral translation, t), dorsoventral distance in the sagittal plane between centric occlusion and initial point of tooth-tooth contact measured from primary occluding tooth (ventral rotational distance, d), and the angle in degrees from the vertical in the sagittal plane between centric occlusion and initial point of tooth-tooth contact (sagittal occlusal angle) (a). Additionally, the distance between the lateral margins of the glenoid fossae was recorded as a measure of body size (glenoid fossae width, w).

Prior to analysis, lateral translation distance and ventral rotational distance were divided by glenoid fossae width, then natural log transformed. These ratios are measures of the relative amount of mandibular motion. Sagittal occlusal angle was also natural log transformed. These measures were compared between the two sampled orders for significant differences in medians using the non-parametric Mann–Whitney U test.

Tooth shape

Tooth shape was measured as the number of discrete orientation patches on the teeth in a row (OPC). This measure provides a good estimate of the complexity of a morphological surface, which corresponds to the number of orientation-delimited functional surfaces [24]. For OPC calculation, the carnivoran tooth row was defined as P4/m1 and posterior, while for Dasyuromorphia the tooth row was defined as M1/m1 and posterior. For each specimen, the occlusal surfaces of the upper and lower tooth rows were isolated and saved as vertex files. These files were converted in Surfer for Windows (Golden Software, Inc., Colorado) and custom GIS software was used to measure the OPC value of the reconstructions (Surfer Manipulator [24]). Each tooth row was standardized to 50 data rows per tooth, so a row of 4 teeth was standardized to 200 data rows while a row of 1 tooth was standardized to 50 data rows. This down-sampling method allows for a more fair comparison between specimens and is in contrast to previous studies using OPC [24,29,30]. Additionally, to reduce the effect of tooth row orientation, the mean of OPC values from eight rotations of the three dimensional reconstructions at multiples of 5.625° was used [30]. This alternative measure is called OPCR.

OPCR measurements were natural log transformed prior to analysis. The relationship between upper tooth row ln(OPCR) and lower tooth row ln(OPCR) was determined using an ordinary least squares regression. Average tooth OPCR values were calculated as the tooth row OPCR value divided by the number of teeth in that tooth row, then natural log transformed.

Model comparisons

Generalized least squares (GLS) models were constructed for two hypothesis groups: upper tooth row OPCR as a response to lower tooth row OPCR and measures of mandibular motion, and lower tooth row OPCR as a response to upper tooth row OPCR and measures of mandibular motion. GLS is an extension of ordinary least squares (OLS) estimation, but allows for correlation between the predictors, an assumption of OLS [33,34]. GLS models were fitted by maximum likelihood and with a Gaussian spatial correlation structure in cases of multiple predictors.

Five different models were constructed for both responses of upper and lower tooth row complexity. Each model represents a unique hypothesis of morphological factors controlling tooth shape: tooth row shape is only controlled by 1. opposing tooth row shape; 2. opposing tooth row shape and relative lateral translation (rt); 3. opposing tooth row and relative ventral rotational distance (rd); 4. opposing tooth row, relative lateral movement (rt) and relative ventral rotational distance (rd); or 5. opposing tooth row and sagittal occlusal angle (a). Sagittal occlusal angle is a tangent transform of the ratio between lateral translation and ventral rotational distance and gives an alternate measure of mandibular motion. All variables were natural log transformed prior to model fitting.

Models were compared using the second order Akaike’s Information Criterion (AICc) [35,36] which is recommended for routine use with small sample sizes [37]. AICc is an estimation of the distance of the model from reality and lower AICc value indicates that a model explains a greater amount of the response variance as possible without being overfit to the data. The number of parameters (K), log-likelihood, ΔAICc, and Akaike weights are reported. Akaike weight is an approximation of the selection probability of a model. A ΔAICc value of less than 2 indicates little to no difference in model performance from the best performing model, while values between 4 and 8 indicate moderate model support and values greater than 10 indicate no model support [37]. The sum of Akaike weights in rank order to equal to or greater than 0.95 represents an approximate 95% confidence set of best models [37].

All analysis was performed in the R statistical programming environment [38] using the MuMIn [39], and nlme [40] packages.

Results and discussion

Morphological measures

Carnivoran upper tooth row OPCR values range from 42.625 in Neofelis nebulosa to 172.625 in Canis aureus (Table 1). Dasyuromorph upper tooth row OPCR values range from 133.375 in Thylacinus cynocephalus to 301.625 in Phascogale tapoatafa. Lower tooth row variation is similar (Figure 2), with Carnivora ranging between 18.375 in N. nebulosa to 139.5 in Genetta genetta and Dasyuromorphia ranging between 98.75 in T. cynocephalus to 204.875 in P. tapoatafa. The OPCR value for the lower tooth row of N. nebulosa, a single molar, is among the lowest ever recorded [24,27-30].

thumbnailFigure 2 . Comparison of natural log transformed OPCR values for sampled Carnivora and Dasyuromorphia. (A) Upper tooth row OPCR, (B) average upper tooth OPCR, (C) lower tooth row OPCR, (D) average lower tooth OPCR.

Dasyuromorph upper tooth row OPCR values are significantly greater than carnivoran upper tooth row OPCR values based on a Mann–Whitney U test (p < 0.0001). This is also true for lower tooth row OPCR values (p < 0.0001). Dasyuromorph average upper OPCR values are significantly greater than carnivoran upper tooth OPCR values (Mann–Whitney U = 77, p < 0.05), while average lower tooth OPCR values are not significantly different (Mann–Whitney U = 104, p > 0.2). However, in the case of average upper OPCR values, N. nebulosa is an outlier with a very low average tooth OPCR. When this value is censored from analysis, dasyurid upper tooth OPCR values are only marginally significantly greater (Mann–Whitney U = 77, p ≈ 0.043). Additionally, there is great overlap between dasyuromorph and carnivoran average tooth OPCR values, both upper and lower (Figure 2). These results show that when tooth row length is taken into account, the two orders have similar dental complexity.

An OLS linear regression between upper OPCR as a response to lower OPCR in our samples reveals a strong and significant relationship (r2 = 0.92, p < 0.00001). Additionally when upper and lower tooth row OPCR values of previously sampled Carnivora [24] are plotted in the same space, the linear relationship between all of these upper tooth row OPCR response and lower tooth row OPCR values has a high correlation and is significant (r2 = 0.86, p < 0.00001). Additionally, parameter estimates of the slope and intercept for both linear models are within one standard error of each other. Of all 58 carnivoran and dasyurid specimens from this study and Evans et al. [24] only four have lower tooth row OPCR values that are greater than upper tooth row OPCR values.

Lateral translation distance varies between under a millimeter for Suricata suricatta to 8.79 mm for T. cynocephalus. There is a strong correlation between lateral translation and glenoid fossae width (r = 0.77). Dasyuromorph relative lateral translation distance is marginally significantly higher than that of carnivorans (Mann–Whitney U = 83, p ~ 0.047) though there is great overlap between the two orders, with Dasyuromorphia being almost entirely nested in the range of carnivoran values.

Similar to lateral translation distance, there is great variation in ventral rotational distance ranging from 1.236 mm for S. suricatta to 18.917 mm for Crocuta crocuta. Ventral rotational distance, as with lateral movement distance, is highly correlated with body size as measured by glenoid fossae width (r = 0.86). Ventral rotational distance shows a continuous distribution from smaller sized to larger sized taxa, and exhibits no taxonomic sorting. This is supported by the lack of significant difference in relative ventral rotational distance between Carnivora and Dasyuromorphia (Mann–Whitney U = 171, p > 0.2).

Sagittal occlusal angles range from 14.55° for Mustela putorius to 42.4° for Dasycercus cristicauda. Dasyuromorph sagittal occlusal angles are significantly greater than carnivoran sagittal occlusal angles (Mann–Whitney U = 76, p < 0.05); however, there is a large amounts of overlap between the two orders and dasyuromorphs have a narrower range of values.

Because of the large degree of overlap in all morphological measures, instead of considering these two orders as distinct, we will consider Carnivora and Dasyuromorphia as part of the same morphological continuum. When there are few subpopulations, small sample size, and large overlap in value means, linear mixed-effects models, which take subpopulation effects into account, are numerically equivalent to the simpler generalized least-squares method. Preliminary comparisons made between mixed-effects and GLS models showed they were numerically equivalent with no major difference in likelihood, indicating no major subpopulation effects. These results are consistent with traditional morphometric and geometric morphometric analyses of skull shape in carnivorous mammals suggest that Dasyuromorphia and Carnivora are part of a continuum of carnivorous skull shapes [41-43]. Additionally, our finding that dasyuromorphs occupy a much smaller range of morphologies than carnivorans is also consistent with previous studies [41,42,44,45].

This is the first study to measure dasyuromorph, and marsupial in general, OPCR values and we find that OPCR values in Carnivora and Dasyuromorphia occupy an overlapping range of values. Tooth row OPCR values are larger in dasyuromorphs than carnivorans, although average tooth complexities are nearly identical. The marginally greater median average tooth OPCR in dasyurids than carnivorans may be a product of the sampled carnivoran diversity. This also applies to our measures of mandibular motion where the marginally significant greater relative lateral translation in dasyurids than carnivorans may be a product of sampling. Increased sampling in Carnivora may also negate these findings. Current carnivoran sampling does not include more omnivorous or herbivorous species, such as bears. Jaw movement in bears is not as constrained by tooth shape as carnivorans with more blade-like teeth and our methodological focus on centric occlusion cannot be applied in less constrained systems.

Model comparisons

The best performing model of upper tooth row OPCR is a combination of lower tooth row OPCR and relative ventral rotational distance (Table 2). This five parameter linear model had a log-likelihood of 27.733, an AICc score of −43.3, and an Akaike weight of 0.757. The second best model is the most complicated model of lower tooth row OPCR, relative lateral movement and relative ventral rotational distance with an Akaike weight of 0.192, and the ΔAICc between the first and second models of 2.75 indicates marginal difference between these models. The third best model is lower tooth row OPCR and relative lateral movement with an Akaike weight of 0.046 and ΔAICc of 5.61, again indicating marginal difference between this model and the best model. Both the lower tooth row OPCR alone model and lower tooth row OPCR and sagittal occlusal angle models are poorly performing (Table 2), indicating much lower empirical support for these models. A simple 95% confidence set is almost achieved by summing the Akaike weights of the best two AICc models at 0.949, and inclusion of the third AICc best model increases the total sum to 0.995.

Table 2. Model selection results for upper tooth row as response

The best model of lower tooth row complexity is upper tooth row OPCR and relative ventral rotational distance with a log-likelihood of 20.214, AICc of −28.3, and Akaike weight of 0.446 (Table 3). The second best model is upper tooth row OPCR and relative lateral translation distance with an Akaike weight of 0.276 and with a ΔAICc between the first and second models of 0.96 meaning there is no discernible difference between the two models. The third best model of lower tooth row is the complex model of upper tooth row OPCR, relative lateral movement, and relative ventral rotational distance with an Akaike weight of 0.273 and a ΔAICc of 0.99 indicating no discernible difference between this model and the first two [37]. Both the lower tooth row OPCR alone model and lower tooth row OPCR and sagittal occlusal angle indicates little empirical support for these models (Table 3). A 95% confidence set of selected models requires only the top three AICc best models, with a sum of Akaike weights of 0.995.

Table 3. Model selection results for lower tooth row as response

For both upper and lower tooth row OPCR as model responses, the numerically best performing model was the opposing tooth row OPCR and relative ventral rotational distance. However, in both cases these models do not greatly outperform the next two best models. We recommend the use of multimodel inference methodology, such as weighted parameter averaging, to take this uncertainty in parameter estimates and variance into account when making estimates from these models [37,46].

For upper tooth row OPCR as response, our 95% confidence set is made up of our three best performing models. The only variables in these models are lower tooth row OPCR, relative ventral rotational distance and relative lateral translation of the mandible. Multi-model inference and parameter averaging would be best limited to just the best three models. Inclusion of the last two models in model averaging is most likely unnecessary, as they have large ΔAICc values and low Akaike weights. From the three model confidence set we find that upper tooth row OPCR decreases if lower OPCR is held constant and one of relative ventral rotational distance or relative lateral translation increases and the other is held constant (Table 2). If the lower OPCR variable increases and both ventral rotational distance and relative lateral translation are held constant, the upper OPCR increases.

There are similar results for lower tooth row OPCR as a response. The parameters in the three models of our 95% confidence set are upper tooth row OPCR, relative ventral rotational distance and relative lateral translation of the mandible. The second and third best performing models have ΔAICc values of less than 1, indicating these models are virtually identical is explaining lower tooth row OPCR. As such, the best model would be made weighted averaging of the estimated parameters of these three models. Inclusion of the final two models is unnecessary, as they both have high ΔAICc values and low Akaike weights. From the confidence set of these three models we find that lower tooth row OPCR increases if upper OPCR is held constant and one of relative ventral rotational distance or relative lateral translation increases and the other is held constant (Table 3). Similar to models with upper OPCR response, if the upper OPCR variable increases and both ventral rotational distance and relative lateral translation are held constant, lower OPCR increases.

In both model selection cases, models with just OPCR or with OPCR and sagittal occlusal angle as predictors are the two worst performing models, by moderate difference in AICc values. The poor relative model support of OPCR as the sole predictor means that the best possible inference of the opposing tooth row OPCR should not be based entirely from OPCR values. Instead more complex models are advisable (see below). The poor performance of OPCR and sagittal occlusal angle is unexpected, as this value represents the angle of movement of the jaw during closing. While this angle measure is strongly correlated with both upper and lower OPCR, the use of GLS with a Gaussian spatial correlation to control for this multicollinearity leads to low likelihood models which perform worse than models including the linear measures.

Conclusions

The combination of kinetic and static measures has not previously been used in the context of integration, though represents an important part of studies of comparative anatomy [47]. The use of three dimensional reconstructions allows for measurements, such as ventral rotational distance, to be more easily measured than other less exact or time-intensive techniques such as estimating occlusal direction from microwear or x-ray cineradiography [48-54]. Our results indicate that the inclusion of kinetic measures is valid in statistical models of morphological integration. The inclusion of kinetic measures in integration studies provides an enhanced understanding of the complex interplay of features and processes constraining morphology. While the effects of the measures of mandibular motion are quite small, their inclusion increases the explanation of the variance in the response for our different models without overfitting our data, meaning that there is an aspect of tooth row shape not explained by just the shape of the opposing tooth row. It is important to note, however, that the degree of these changes should be calculated through model averaging methods [37,46]. Morphology, especially ecologically-critical morphology, has functional requirements, thus it makes sense that the best performing models of tooth row shape include both kinetic-type in addition to static-type measures.

Additionally, the use of information theoretic model selection criteria also provides a method for quantifying the uncertainty between different hypotheses of constraint. Model selection uncertainty allows for better parameter and variance estimates by using weighted averages of values from the set of best models [37,46]. Also, by increasing sample size, more complex models with possible tapering effects, which are only observable at large sample sizes, can be compared. Currently, this is beyond the reach of this data set. A potential source of new taxa would be Creodonta, an extinct group of carnivorous mammals with lower molar structure similar to dasyurids. The inclusion of a wider range of carnivorous mammals outside Carnivora and Dasyuromorphia would increase the generality of this analysis.

Future analysis may wish to consider the interaction of relative lateral translation distance and relative ventral rotational distance as a predictor instead of the solely additive relationship between these two variables. This new variable is an alternative relation between the horizontal and vertical movement and may allow for a better understanding of tooth row shape. Preliminary exploratory post hoc analysis indicates the inclusion of this variable may be unnecessary, though increased sample size may recover possible tapering effects.

In conclusion, our results provide quantitative support of long-standing hypotheses of tooth row shape as being influenced by mandibular motion in addition to the opposing tooth row [25,26]. Our results show that, even at low sample sizes, increasing model complexity for estimating tooth row OPCR values by including measures of mandibular motion is warranted, produces a better model in terms of AICc, and that the relative importance of these measures should be taken into account during analysis.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

PDS conceived the study. PDS and ARE gathered and scanned specimens. PDS measured mandibular motion. PDS conducted statistical analysis with input from ARE. PDS wrote the manuscript with input from ARE. All authors read and approved the final manuscript.

Acknowledgments

We thank NW Longmore and R O’Brien (NMV) for assistance with specimens and A Courtney for coordinating loans. PDS would like to thank G Hunt and the 2012 PBDB workshop for training in R. ARE is supported by an Australian Research Fellowship from the Australian Research Council. We would also like to thank PD Polly and an anonymous reviewer for helpful comments that improved the quality of this manuscript.

References

  1. Arnold SJ: Constraints on phenotypic evolution.

    American Naturalist 1992, 85:85-107. OpenURL

  2. Wainwright SA, Biggs WD, Currey JD, Gosline JM: Mechanical design in organisms. Princeton University Press, Princeton; 1976. OpenURL

  3. Wainwright SA: Form and function in organisms.

    American Zoologist 1988, 28:671-680. OpenURL

  4. Wainwright P: Ecomorphology: experimental functional anatomy for ecological problems.

    American Zoologist 1991, 31:680. OpenURL

  5. Schmitz L, Wainwright PC: Nocturnality constrains morphological and functional diversity in the eyes of reef fishes.

    BMC Evolutionary Biology 2011, 11:338. OpenURL

  6. Voigt CC, Schneeberger K, Voigt-Heucke SL, Lewanzik D: Rain increases the energy cost of bat flight.

    Biology Letters 2011, 7:793-795. OpenURL

  7. Hassan MA, Westermann GEG, Hewitt RA, Dokainish MA: Finite-element analysis of simulated ammonoid septa (extinct Cephalopoda): septal and sutural complexities do not reduce strength.

    Paleobiology 2002, 28:113-126. OpenURL

  8. Vermeij G: Characters in context: molluscan shells and the forces that mold them.

    Paleobiology 2002, 28:41-54. OpenURL

  9. Herrel A, De Smet A, Aguirre L: Morphological and mechanical determinants of bite force in bats: do muscles matter?

    Journal of Experimental Biology 2008, 211:86-91. OpenURL

  10. Wroe S, Huber D, Lowry M, McHenry C, Moreno K, Clausen P, Ferrara TL, Cunningham E, Dean MN, Summers AO: Three-dimensional computer analysis of white shark jaw mechanics: how hard can a great white bite?

    Journal of Zoology 2008, 276:336-342. OpenURL

  11. Dumont E, Herrel A, Medellín R, Vargas J: Built to bite: cranial design and function in the wrinkle-faced bat.

    Journal of Zoology 2009, 279:329-337. OpenURL

  12. Olson EC, Miller RL: Morphological Integration. University of Chicago Press, Chicago; 1958. OpenURL

  13. Pigliucci M, Preston K: Phenotypic Integration. Oxford University Press, Oxford; 2004. OpenURL

  14. Chernoff B, Magwene PM: Afterword. In Morphological Integration. Edited by Olson EC, Miller RL. University of Chicago Press, Chicago; 1999:319-348. OpenURL

  15. Goswami A, Polly PD: Methods for studying morphological integration and modulatiry. In Quantative Methods in Paleobiology. The Paleontological Society Papers, Volume 16. Edited by Alroy J, Hunt G.  ,  ; 2010:213-243. OpenURL

  16. Klingenberg CP: Morphological integration and developmental modularity.

    Annual review of ecology, evolution, and systematics 2008, 39:115-132. OpenURL

  17. Savriama Y, Klingenberg CP: Beyond bilateral symmetry: geometric morphometric methods for any type of symmetry.

    BMC Evolutionary Biology 2011, 11:280. OpenURL

  18. Goswami A: Cranial modularity shifts during mammalian evolution.

    Am Nat 2006, 168:270. OpenURL

  19. Zelditch ML, Wood AR, Swiderski DL: Building developmental integration into functional systems: function-induced integration of mandibular shape.

    Evolutionary Biology 2008, 36:71-87. OpenURL

  20. Gerber S, Hopkins MJ: Mosaic heterochrony and evolutionary modularity: the trilobite genus Zacanthopsis as a case study.

    Evolution 2011, 65:3241-3252. OpenURL

  21. Webster M, Zelditch ML: Evolutionary lability of integration in cambrian ptychoparioid trilobites.

    Evolutionary Biology 2011, 38:144-162. OpenURL

  22. Webster M, Zelditch ML: Modularity of a Cambrian ptychoparioid trilobite cranidium.

    Evolution and Development 2011, 13:96-109. OpenURL

  23. Spears IR, Crompton RH: The mechanical significance of the occlusal geometry of great ape molars in food breakdown.

    Journal of Human Evolution 1996, 31:517-535. OpenURL

  24. Evans A, Wilson G, Fortelius M, Jernvall J: High-level similarity of dentitions in carnivorans and rodents.

    Nature 2007, 445:78-81. OpenURL

  25. Ryder JA: On the mechanical genesis of tooth-forms.

    Proceedings of the Academy of Natural Sciences of Philadelphia 1878, 30:45-80. OpenURL

  26. Simpson GG: Paleobiology of Jurassic mammals.

    Paleobiologica 1933, 5:127-158. OpenURL

  27. Boyer D, Evans A, Jernvall J: Evidence of dietary differentiation among late Paleocene–early Eocene plesiadapids (Mammalia, primates).

    American Journal of Physical Anthropology 2010, 142:194-210. OpenURL

  28. Skinner M, Evans A, Smith T, Jernvall J, Tafforeau P, Kupczik K, Olejniczak A, Rosas A, Radovčić J, Thackeray J: Brief communication: Contributions of enamel‒dentine junction shape and enamel deposition to primate molar crown complexity.

    American Journal of Physical Anthropology 2010, 142:157-163. OpenURL

  29. Santana SE, Strait S, Dumont ER: The better to eat you with: functional correlates of tooth structure in bats.

    Functional Ecology 2011, 25:839-847. OpenURL

  30. Wilson GP, Evans AR, Corfe IJ, Smits PD, Fortelius M, Jernvall J: Adaptive radiation of multituberculate mammals before the extinction of dinosaurs.

    Nature 2012, 483:457-460. OpenURL

  31. Evans A, Fortelius M: Three-dimensional reconstruction of tooth relationships during carnivoran chewing.

    Palaeontologia Electronica 2008, 11:10A-11p. OpenURL

  32. Herring S: Functional morphology of mammalian mastication.

    American Zoologist 1993, 33:289-299. OpenURL

  33. Pinheiro JC, Bates D: Mixed-effects models in S and S-PLUS. Springer, New York; 2000. OpenURL

  34. Venables WN, Ripley BD: Modern Applied Statistics with S. 4th edition. Springer, New York; 2002. OpenURL

  35. Akaike H: A new look at the statistical model identification.

    IEEE Transactions on Automatic Control 1974, 19:716-723. OpenURL

  36. Sugiura N: Further analysis of the data by Akaike's information criterion and the finite corrections.

    Communications in Statistics - Theory and Methods 1978, 7:13-26. OpenURL

  37. Burnham D, Anderson KP: Model selection and multi-model inference: a practical-information theoretic approach. 2nd edition. Springer, New York; 2002. OpenURL

  38. R Core Team: R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria;

    http://www.R-project.org/ webcite

    OpenURL

  39. Barton K:

    MuMIn: Multi-model inference. R package version 1.7.11. 2012.

    http://CRAN.R-project.org/package=MuMIn webcite

    OpenURL

  40. Pinheiro J, Bates D, DebRoy S, Sarkar D: R Development Core Team: nlme: Linear and Nonlinear Mixed Effect Models. 3rd edition. Springer, New York; 2011. OpenURL

  41. Wroe S, Milne N: Convergence and remarkably consistent constraint in the evolution of carnivore skull shape.

    Evolution 2007, 61:1251-1260. OpenURL

  42. Goswami A, Milne N, Wroe S: Biting through constraints: cranial morphology, disparity and convergence across living and fossil carnivorous mammals.

    Proceedings of the Royal Society B: Biological Sciences 2011, 278:1831-1839. OpenURL

  43. Jones ME: Convergence in ecomophology and guild structure among marsupial and placental carnivores. In Predators with pouches. Edited by Jones ME, Dickman CR, Archer M. CSIRO, Australia; 2003:285-296. OpenURL

  44. Werdelin L: Comparison of skull shape in marsupial and placental carnivores.

    Australian Journal of Zoology 1986, 34:109-117. OpenURL

  45. Werdelin L: Jaw geometry and molar morphology in marsupial carnivores: analysis of a constraint and its macroevolutionary consequences.

    Paleobiology 1987, 13:342-350. OpenURL

  46. Buckland ST, Burnham KP, Augustin NH: Model selection: an integral part of inference.

    Biometrics 1997, 53:603-618. OpenURL

  47. Homberger DG: Models and tests in functional morphology: the significance of description and integration.

    American Zoologist 1988, 28:217-229. OpenURL

  48. Gregory W: On the structure and relations of Notharctus, an American Eocene primate.

    Memoirs of the American Museum of Natural History, New Series 1920, 3:49-243. OpenURL

  49. Butler P: Molarization of the premolars in the Perissodactyla.

    Proceedings of the Zoological Society of London 1952, 121:819-843. OpenURL

  50. Mills J: A comparison of lateral jaw movements in some mammals from wear facets on the teeth.

    Archives of Oral Biology 1967, 12:654-661. OpenURL

  51. Crompton A, Hiiemae K: Molar occlusion and mandibular movements during occlusion in the American opossum, Didelphis marsupialis L.

    Zoological Journal of the Linnean Society 1970, 49:21-47. OpenURL

  52. Greaves W: The inference of jaw motion from tooth wear facets.

    Journal of Paleontology 1973, 47:1000-1001. OpenURL

  53. Gordon K: Microfracture patterns of abrasive wear striations on teeth indicate directionality.

    American journal of physical anthropology 1984, 63:315-322. OpenURL

  54. Brainerd EL, Baier DB, Gatesy SM, Hedrick TL, Metzger KA, Gilbert SL, Crisco JJ: X-ray reconstruction of moving morphology (XROMM): precision, accuracy and applications in comparative biomechanics research.

    Journal of Experimental Zoology Part A: Ecological Genetics and Physiology 2010, 313:262-279. OpenURL