Email updates

Keep up to date with the latest news and content from BMC Bioinformatics and BioMed Central.

Open Access Methodology article

Using hexamers to predict cis-regulatory motifs in Drosophila

Bob Y Chan* and Dennis Kibler

Author affiliations

School of Information and Computer Science, University of California, Irvine, Irvine, California, USA

For all author emails, please log on.

Citation and License

BMC Bioinformatics 2005, 6:262  doi:10.1186/1471-2105-6-262


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2105/6/262


Received:30 June 2005
Accepted:27 October 2005
Published:27 October 2005

© 2005 Chan and Kibler; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Cis-regulatory modules (CRMs) are short stretches of DNA that help regulate gene expression in higher eukaryotes. They have been found up to 1 megabase away from the genes they regulate and can be located upstream, downstream, and even within their target genes. Due to the difficulty of finding CRMs using biological and computational techniques, even well-studied regulatory systems may contain CRMs that have not yet been discovered.

Results

We present a simple, efficient method (HexDiff) based only on hexamer frequencies of known CRMs and non-CRM sequence to predict novel CRMs in regulatory systems. On a data set of 16 gap and pair-rule genes containing 52 known CRMs, predictions made by HexDiff had a higher correlation with the known CRMs than several existing CRM prediction algorithms: Ahab, Cluster Buster, MSCAN, MCAST, and LWF. After combining the results of the different algorithms, 10 putative CRMs were identified and are strong candidates for future study. The hexamers used by HexDiff to distinguish between CRMs and non-CRM sequence were also analyzed and were shown to be enriched in regulatory elements.

Conclusion

HexDiff provides an efficient and effective means for finding new CRMs based on known CRMs, rather than known binding sites.

Background

The development of eukaryotic organisms is tightly regulated by a variety of mechanisms. The initial step of regulation is carried out by transcription factors interacting with cis-regulatory sequences, also known as transcription factor binding sites (TFBS). In eukaryotes, multiple TFBS are often clustered together into cis-regulatory modules (CRMs). The TFBS can be thought of as inputs into an information processing element, with the output being the level of expression of the gene controlled by the CRM [1].

One of the major challenges for understanding eukaryotic gene regulation is finding CRMs. There are two main types of CRMs – promoters and enhancers. Promoters are located immediately upstream of a gene's transcriptional start site and often contain a variety of sequence signals such as the TATA box, CCAAT box, and different TFBS. These characteristics have been used in approaches for finding promoters [2]. In contrast, enhancers do not share these signals and operate in a manner that is relatively independent of orientation or distance from their target gene [3]. In fact, one enhancer, Dct, has been found almost a megabase away from Sox9, the gene it regulates [4]. Because of the lack of common signals and because the search for enhancers cannot be limited to the few hundred base pairs upstream of the transcriptional start site, finding enhancers is a more difficult problem.

Methods for predicting CRMs can be classified by the type of information they use to make the predictions – known binding sites of regulatory proteins, homologous sequences, or known CRMs. Binding sites for the first type of method are generally modeled using position weight matrices (PWMs) or consensus sequences. These models are used to search for statistically significant clusters of predicted TFBS. Examples of methods based on binding sites of multiple transcription factor proteins include one developed for human skeletal muscle [5], a logistic regression analysis model for liver-specific transcription factors [6], CIS-ANALYST [7], MCAST [8], Ahab [9], Stubb [10], Cluster Buster [11], MSCAN [12], and EMCMODULE [13]. Methods based on binding sites of single transcription factors have also been developed – SCORE [14], Fly Enhancer [15], and a method of searching for homotypic clusters [16].

Methods based on homologous sequences assume that areas of the DNA involved in regulating gene transcription are under selective pressure and are therefore more likely to be conserved than non-functional DNA [17]. These methods can be categorized by whether they search for conserved DNA by aligning homologous regions from multiple species [18-20], homologous regions from two species [21-24], or homologous regions from related genes in a single species (also referred to as co-regulated genes) [25-27].

Methods based on locations of known CRMs have been rarer. Methods of this type tend to look for statistical properties of DNA sequence that distinguish CRMs from non-regulatory DNA. One group has developed a statistical test called the "fluffy-tail test" that looks for differences in nucleotide composition, particularly in lists of words of various lengths [28]. From the related field of promoter prediction comes PromFind, an algorithm for finding promoters that uses hexamer frequencies of known promoters to search for DNA with similar frequencies [29]. Because PromFind was developed for promoters, the author could assume that every sequence being tested contained one promoter, and that the strand containing the promoter was known – assumptions that are not true for enhancers. Another recent algorithm developed to predict CRMs is based on the exhaustive analysis of local word frequencies (LWF) [30]. Unlike PromFind where the algorithm is based solely on hexamer words, the LWF algorithm considers the pattern of word frequencies in a sliding window.

While the LWF algorithm was shown to perform well at the task of predicting CRMs [30], it is difficult to put a biological meaning to the results since the algorithm depends on word frequencies, not on the words themselves. In contrast, the PromFind algorithm generates lists of hexamers that are important for distinguishing promoters from non-promoter sequences. In the paper describing PromFind, the author analyzes the hexamers used by the algorithm for their CpG dinucleotide content and their similarity to various known promoter signals such as the Sp1, TATA-box, and CCAAT-box motifs [29]. This type of analysis cannot be performed on the local word frequency distributions of the LWF algorithm, due to the way it was designed.

We developed the HexDiff algorithm to solve the same problem as the LWF algorithm – predicting the location of CRMs – while being as biologically meaningful as the PromFind algorithm. The performance of HexDiff was compared to the LWF algorithm and several other CRM prediction programs using a common data set. The hexamers used by HexDiff were then examined to see if known TFBS were recovered.

Results

Data set

The early development of the Drosophila embryo is well-studied, both biologically and computationally. Data sets detailing the locations of known CRMs have been published by several groups [7,9,30,31], but we chose the one compiled by Schroeder et al. as it clearly defined the regulatory networks involved. In their analysis, Schroeder et al. examined 29 genes with gap and pair-rule patterns. However, only 16 of those genes were associated with known CRMs [31]. Therefore, we focused our study on those 16 genes, which contained a total of 52 CRMs. Sequences for the genes were obtained from the 4.1 Release of the Drosophila genome and included the 20 kb upstream as well as downstream of each gene [see 1]. Since the known CRMs were provided as FASTA-formatted DNA sequences, their positions relative to the extracted sequences were confirmed using BLAST [see 2].

Additional File 1. Sequences comprising the data set. FASTA-formatted sequences that include the 20 kb upstream and downstream of the 16 gap and pair-rule genes that were studied. Sequences were extracted from Release 4.1 of the Drosophila genome using FlyBase's "GBrowse" Genome Browser.

Format: TXT Size: 708KB Download fileOpen Data

Additional File 2. Coordinates of known CRMs. Coordinates of known CRMs, relative to the sequences in 2.

Format: TXT Size: 2KB Download fileOpen Data

The HexDiff algorithm

The HexDiff algorithm is designed to discriminate between CRMs and non-CRM sequence by using hexamer frequencies. For evaluation, we use the leave-one-out cross-validation (LOOCV) methodology. In this case, 15 of the 16 sequences in the data set are used as a training set and the 16th sequence is used as the test set. The process is repeated 16 times; leaving out one sequence each time. During training, hexamers that appear more frequently in CRMs are selected. In order to predict CRMs in the test set sequence, a window is slid across the sequence and the set of selected hexamers (Hd) is used to calculate a score that is used to predict whether each position is either CRM or non-CRM sequence.

Performance comparison

The HexDiff algorithm was compared to five other CRM prediction algorithms: Ahab, Cluster Buster, MSCAN, MCAST, and LWF (see Table 1). The results for Ahab were obtained from the supplementary files of Schroeder et al., while Cluster Buster, MSCAN, MCAST, and LWF are all available as downloadable software or public web servers. An important criterion for the inclusion of an algorithm was that it accepted user-defined sequences and PWMs as input. Ahab, Cluster Buster, MSCAN, and MCAST are algorithms based on binding sites of known transcription factors and were given the same set of nine PWMs for the transcription factors as described in Schroeder et al.: the maternal factors Bicoid (Bcd), Hunchback (Hb), Caudal (Cad), the Torso-response element (TorRE), and Stat92E (D-Stat), and the gap factors Kruppel (Kr), Knirps (Kni), Giant (Gt), and Tailless (Tll). LWF was given the same positive and negative training sets as HexDiff. The default parameters were used for Cluster Buster, MSCAN, MCAST, and LWF. The complete list of predictions can be found in the Additional materials section [see 3].

Table 1. Key aspects of HexDiff and other algorithms. The table shows the knowledge used and the parameters required by the different algorithms.

Additional File 3. Coordinates of CRMs predicted by the different algorithms. Coordinates of predicted CRMs for each of the algorithms compared in this study, relative to the sequences in 2.

Format: TXT Size: 32KB Download fileOpen Data

As shown in Table 2, each algorithm was assigned a cumulative score, calculated by summing the Matthews correlation coefficients for each of the sequences in the data set. The predictions made by HexDiff have the highest correlation with the known CRMs (5.71), followed by Ahab (4.48) and Cluster Buster (4.24). An interesting result is that although four of the six algorithms used the same PWMs, their performance varied widely – from 1.81 to 4.48.

Table 2. Correlation between predicted and known CRMs. The performance of six different algorithms on a common data set is compared in this table. For each sequence, the Matthews correlation coefficient is calculated by checking whether each position is a TP, TN, FP, or FN and using the equation listed in the Methods section. The sum of the correlation coefficients gives a cumulative score for each algorithm on this data set.

While the Matthews correlation coefficient was the primary performance measure for the six algorithms, a closer look at two other measures offers more information about the characteristics of the individual algorithms. Table 3 shows sensitivities and positive predictive values (PPVs) for each of the algorithms. A known CRM was considered recovered if the overlap between it and a predicted CRM exceeded 50 bp.

Table 3. Sensitivities and positive predictive values (PPVs) of HexDiff and other algorithms. A known CRM was considered recovered if a predicted CRM overlapped it by at least 50 bp. The PPVs in this table are italicized because they are estimates of the true PPVs. Without complete knowledge of all CRMs that are present in the 16 sequences, it is possible that some of the predicted CRMs that are labeled as false positives are actually true positives.

One caveat about the PPVs in Table 3 is that they are not true PPVs, but estimates of the true PPVs. This is due to the fact that the 16 sequences in the data set may contain more CRMs than the 52 that have been characterized so far, which would mean that some of the predicted CRMs that are labeled as false positives could actually be true positives.

Predicted CRMs

Of the 104 predictions made by HexDiff, 36 overlapped known CRMs by at least 50 bp, leaving 68 potential CRMs. Some of these may have been false positives, so to narrow down the candidates, the 68 potential CRMs were compared to predictions made by Ahab, Cluster Buster, MSCAN, MCAST, and LWF. 37 of the 68 matched predictions made by at least one other method, while 18 matched predictions made by at least two other methods, 10 matched predictions made by at least three other methods, and 6 matched predictions made by at least four other methods.

While our analysis was focused on the gap and pair-rule regulatory networks, it's possible that some of the predicted CRMs are actually known CRMs from other regulatory networks involved in the early development of Drosophila. Therefore, the list of 18 predicted CRMs was compared to a more comprehensive compilation of 124 CRMs [32]. 8 of the 18 predicted CRMs matched CRMs from the compilation, leaving 10 that do not correspond to any known CRMs. Given the specificities of the individual methods and the breadth of approaches, it seems very likely that some of the 18 predictions listed in Table 4 constitute novel CRMs.

Table 4. Potential novel CRMs predicted by HexDiff and other algorithms. All of the predicted CRMs listed in this table were predicted by HexDiff and at least two other algorithms. The column labeled "Gene" lists the gene involved in the early development of Drosophila that is closest to the predicted CRM. The columns labeled 1–5 are the different algorithms whose predictions matched the CRMs predicted by HexDiff: 1 – Ahab, 2 – Cluster Buster, 3 – MSCAN, 4 – MCAST, and 5 – LWF. The predicted CRMs were also compared to a compilation of 124 CRMs [32] – matching CRMs are listed in the last column.

Meaning of differential hexamers

One advantage of the HexDiff algorithm is that the set of hexamers (Hd) used to distinguish between CRMs and non-CRM sequence can be analyzed for further insights into the mechanisms of gene regulation. Since the Hd hexamers were selected based on their overrepresentation in CRMs relative to non-CRM sequence, it would be reasonable to expect that some of the hexamers would be similar to gap and pair-rule regulatory sites. Therefore, the top 80 Hd hexamers and their reverse complements were compared to the list of binding sites used to build the 9 PWMs from Schroeder et al [see 4]. In the 16 rounds of cross-validation, an average of 59.6 hexamers was found within the binding sites.

Additional File 4. Hd hexamers. Top 80 Hd hexamers calculated by the HexDiff algorithm for each round of cross-validation.

Format: TXT Size: 69KB Download fileOpen Data

Additional File 5. ROC curves for the HexDiff algorithm. The three curves in this plot were made by taking the combination of parameters that gave the best performance on the training sets (number of nmers: 80, window size: 1700 bp, threshold: 170) and holding two parameters constant while varying the third.

Format: PDF Size: 25KB Download file

This file can be viewed with: Adobe Acrobat ReaderOpen Data

Additional File 6. Sensitivities and specificities for HexDiff and the other algorithms. Sensitivities and specificities for HexDiff and the other algorithms were calculated by checking whether each position was a TP, FP, TN, or FN and using the appropriate formulas.

Format: PDF Size: 10KB Download file

This file can be viewed with: Adobe Acrobat ReaderOpen Data

Simulations were carried out to estimate the likelihood of this result. 100,000 random sets of 80 hexamers and their reverse complements were compared to the binding sites. The probability of 59 or more hexamers being found within the binding sites was 0.019, indicating that the hexamers selected by HexDiff were enriched in binding sites of known regulatory proteins.

A similar study was performed using regulatory sites obtained from TRANSFAC [33], but the results were not statistically significant. TRANSFAC contains binding regions obtained through a variety of biological methods. For instance, R02491 contains the following binding region obtained using DNase I footprinting: GACTTTATTGCAGCATCTTGAACAATCGTCGCAGTTTGGTAACAC. On average, TRANSFAC binding sites are much longer than the binding sites used by Schroeder et al .and are therefore probably much less specific. While the TRANSFAC binding sites do contain regulatory DNA, it seems that the signal is washed out by extraneous sequence.

Discussion

The HexDiff algorithm is designed to solve the difficult task of distinguishing CRMs from non-CRM sequence. It is first trained on sequences containing known CRMs by selecting hexamers that discriminate between the two categories. These hexamers are then applied to novel sequences to search for predicted CRMs. The requirements of the training process mean that HexDiff works best in a well-defined regulatory system where some CRMs are already known.

Using a data set of 16 sequences containing 52 CRMs obtained from Schroeder et al., we compared the HexDiff algorithm to five other algorithms: Ahab, Cluster Buster, MSCAN, MCAST, and LWF. Hexdiff's predictions correlated best with biological knowledge, and its sensitivity and specificity were comparable to the other algorithms. This result was encouraging considering that HexDiff is a type of machine learning algorithm, which tend to do better in problems where the items being classified are separated into two roughly equal groups. In this case, the CRMs made up just 9.36% of the total data set, with non-CRM sequence making up the other 90.64%. Even with a data set where the negative data outweighed the positive data by a factor of 9, HexDiff still performed well.

While the HexDiff algorithm has a fairly high specificity in isolation, it would still be prudent to compare its results to the predictions made by other algorithms, considering the time and effort required to biologically confirm a computational prediction. The 18 CRMs listed in Table 4 were predicted by at least three algorithms and did not match any of the 52 CRMs provided by Schroeder et al. A comparison with a more comprehensive list of 124 CRMs revealed that 8 of the 18 predicted CRMs corresponded to known CRMs from other regulatory networks involved in the early development of Drosophila. The 10 remaining predicted CRMs are strong candidates for future study.

A further attempt to understand the meaning of the Hd hexamers was made by comparing them to the known binding sites used to generate the 9 PWMs provided by Schroeder et al. Simulations showed that the number of Hd hexamers found within the binding sites was significantly more than would be expected of a randomly selected set of hexamers of the same size. While this result is not unexpected, it is a confirmation that we retrieved the binding sites of relevant regulatory proteins using only the locations of known CRMs.

While recovering the known binding sites is important, it is important to note that they accounted for less than half of the hexamers in the Hd sets. When 80 hexamers were selected for Hd, their reverse complements would increase the total number of hexamers to 160, barring palindromes. And yet, the average number of hexamers that were found within the known binding sites was 59.6, leaving another 100 hexamers whose identities are unknown. This result suggests that there are novel sequence features besides the known binding sites that are important for distinguishing between CRMs and non-CRM sequence.

Conclusion

One of the major questions in studying eukaryotic gene regulation is how regulatory proteins with relatively degenerate binding sequences can precisely regulate many genes. The discovery of cis-regulatory modules, short stretches of DNA that contain multiple binding sites for multiple proteins, has provided at least a partial explanation for the regulatory specificity observed in eukaryotes, and motivated a search for ways to predict CRMs computationally.

We have developed a simple and effective algorithm for predicting CRMs. In our study of the gap and pair-rule genes in Drosophila melanogaster, the results of the HexDiff algorithm correlated best with biological knowledge, and the sensitivity and specificity of the algorithm were comparable to other algorithms. Our predictions were compared to those made by other methods and resulted in a list of 10 putative CRMs with strong computational support. Analysis of the Hd hexamers revealed that not only were we rediscovering the known binding sites, but also discovering new signals that distinguished between CRMs and non-CRM sequence.

Methods

Differential hexamer frequency algorithm

The HexDiff algorithm is based on the idea of distinguishing between two types of DNA sequence: CRMs, and non-CRM sequence. In order to accomplish this task, a model is built using sequences where the CRMs are known – the training set. The training set is split into positive and negative training sets by consolidating all of the known CRMs into a positive training set, and the remainder of the training set into a negative training set. On average, the ~1 Mb training set is split into a ~50 kb positive training set and a ~950 kb negative training set. The frequency of each hexamer h on both strands is then calculated for the positive fp(h) and negative fn(h) training sets and used to calculate a ratio, R(h).

<a onClick="popup('http://www.biomedcentral.com/1471-2105/6/262/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.biomedcentral.com/1471-2105/6/262/mathml/M1">View MathML</a>

The next step is to select hexamers that discriminate between CRMs and non-CRM sequence. The hexamers with the highest values for R(h) are then placed into Hd. As a result of this selection process, Hd contains hexamers that are much more common in CRMs than in non-CRM sequence.

Once the hexamers for Hd are chosen, the final step is to use them to classify each position in an unknown sequence as either CRM or non-CRM sequence. A window is slid across the unknown sequence 1 bp at a time. At each position i, a score Si is calculated for the window by increasing the score by the product of R(hd) and the number of times that hexamer appeared n(hd) for each hexamer from Hd:

<a onClick="popup('http://www.biomedcentral.com/1471-2105/6/262/mathml/M2','MathML',630,470);return false;" target="_blank" href="http://www.biomedcentral.com/1471-2105/6/262/mathml/M2">View MathML</a>

Any positions where the window scores exceed a threshold score are labeled as potential CRMs. As the shortest known CRM in the data set was 66 bp, we filtered out any predicted CRMs shorter than 50 bp. The entire process takes less than 10 seconds per gene on an Athlon 64 3200+.

Evaluation of predictions

Because there are only 16 sequences in the data set, LOOCV was used to assess the performance of the HexDiff algorithm. In LOOCV, the first of the 16 sequences was withheld from the data set and used as the test set. The HexDiff algorithm was trained on the 15 remaining sequences and predictions were made on the test set sequence. Those predictions were then compared to the locations of the known CRMs in the test set sequence. The same process was repeated with the second sequence, etc., until each of the 16 sequences had been used as a test set.

The accuracy of the predictions for each sequence was measured using the Matthews correlation coefficient, which has been used extensively to evaluate the performance of various prediction algorithms [34]. It combines both sensitivity and specificity into one measure and relies on four values that satisfy TP + TN + FP + FN = N (length of the sequence): TP (the number of base pairs where known CRMs overlap with predicted CRMs), TN (the number of base pairs that are not in known CRMs or predicted CRMs), FP (the number of base pairs where predicted CRMs did not overlap known CRMs), and FN (the number of base pairs where known CRMs did not overlap predicted CRMs). The Matthews correlation coefficient is calculated as follows:

<a onClick="popup('http://www.biomedcentral.com/1471-2105/6/262/mathml/M3','MathML',630,470);return false;" target="_blank" href="http://www.biomedcentral.com/1471-2105/6/262/mathml/M3">View MathML</a>

The Matthews correlation coefficient ranges from -1 to +1, like the better-known Pearson correlation coefficient. A value of 0 signifies that the prediction is equivalent to a completely random prediction, while +1 signifies a perfect prediction.

Choosing parameters

The HexDiff algorithm was designed so that the number of parameters needed to be set by the user was minimized. This reduced the complexity of the model and helped to avoid overfitting. Overfitting is a problem often faced by machine learning algorithms, where a model that is too complex will not only learn the signal in the training set but will also fit the noise, reducing the algorithm's performance on the test set [35]. The three parameters HexDiff does require are: the number of hexamers in Hd, the size of the window that is slid across the sequence of interest, and the threshold score that determines whether each position is predicted as a CRM or not.

These values were chosen during LOOCV using an empirical method. During each round of cross-validation, the 16 sequences were split into a 15-sequence training set and a single-sequence test set. The HexDiff algorithm was trained on the training set and its performance evaluated on the training set, using various combinations of the three parameters. The combination that gave the best performance on the training set was then used to predict CRMs in the test set.

In general, we observed that the HexDiff algorithm was relatively insensitive to the precise values for the parameters. We ran the HexDiff algorithms with 6 values for the number of hexamers (30, 40, 50, 60, 70, 80) and 11 values for the size of the sliding window (1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000). For each pair of parameters, the threshold score that gave the best performance on the training set was selected. For these 66 analyses, the average cumulative Matthews correlation coefficient for the test set sequences was 5.37 with a standard deviation of 0.51. The average number of modules recovered was 33.8 with a standard deviation of 3.29.

Choices in algorithm design

Two important choices were made during the design of the HexDiff algorithm: the model used to represent the training sets, and the type of negative training set used. In order to choose the correct model, a balance had to be struck between the expressivity of the model and the amount of training data. Since the amount of positive training data was fixed at 52 known CRMs, we tried pentamers, hexamers, and heptamers with 0, 1, or 2 mismatches (data not shown). Shorter n-mers would have resulted in a model that was insufficiently expressive to capture the difference between CRMs and non-CRM sequences, while longer n-mers would have resulted in a model whose parameters would have had high variance. Allowing mismatches would have consolidated n-mers into groups and therefore would have had the effect of simplifying the model. In the end, hexamers with no mismatches turned out to have the best performance.

For the LWF algorithm, Nazina and Papatsenko tried three different negative training sets drawn from the Drosophila genome: random samples from the whole genome, random samples of coding sequence, and random samples of non-coding sequence. They found that samples from the whole genome and samples from non-coding sequence resulted in better agreement between CRM predictions from the LWF algorithm and the biologically determined locations. Since we were predicting CRMs in a well-defined set of 16 genes, we used a local negative training set – the portions of the 16 genes that were not labeled as known CRMs. We found this approach to give higher accuracy than the negative training sets used by Nazina and Papatsenko (data not shown).

Availability and requirements

Project name: HexDiffProject home page: http://www.ics.uci.edu/~bobc/hexdiff.html webcite

Operating system: Platform independent

Programming language: Perl

Other requirements: Perl 5.6 or higher

License: GNU GPL

Any restrictions to use by non-academics: licence needed

Authors' contributions

BC carried out the computational work in this study and drafted the manuscript. DK participated in the design of the study and helped revise the manuscript. Both authors read and approved the final manuscript.

Acknowledgements

This investigation was supported by National Institutes of Health, National Research Service Award 5 T15 LM00744, from the National Library of Medicine.

References

  1. Davidson EH, McClay DR, Hood L: Regulatory gene networks and the properties of the developmental process.

    Proc Natl Acad Sci U S A 2003, 100(4):1475-1480. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  2. Qiu P: Recent advances in computational promoter analysis in understanding the transcriptional regulatory network.

    Biochem Biophys Res Commun 2003, 309(3):495-501. PubMed Abstract | Publisher Full Text OpenURL

  3. Laimins LA, Gruss P, Pozzatti R, Khoury G: Characterization of enhancer elements in the long terminal repeat of Moloney murine sarcoma virus.

    J Virol 1984, 49(1):183-189. PubMed Abstract | PubMed Central Full Text OpenURL

  4. Qin Y, Kong LK, Poirier C, Truong C, Overbeek PA, Bishop CE: Long-range activation of Sox9 in Odd Sex (Ods) mice.

    Hum Mol Genet 2004, 13(12):1213-1218. PubMed Abstract | Publisher Full Text OpenURL

  5. Wasserman WW, Fickett JW: Identification of regulatory regions which confer muscle-specific gene expression.

    J Mol Biol 1998, 278(1):167-181. PubMed Abstract | Publisher Full Text OpenURL

  6. Krivan W, Wasserman WW: A predictive model for regulatory sequences directing liver-specific transcription.

    Genome Res 2001, 11(9):1559-1566. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  7. Berman BP, Nibu Y, Pfeiffer BD, Tomancak P, Celniker SE, Levine M, Rubin GM, Eisen MB: Exploiting transcription factor binding site clustering to identify cis-regulatory modules involved in pattern formation in the Drosophila genome.

    Proc Natl Acad Sci U S A 2002, 99(2):757-762. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  8. Bailey TL, Noble WS: Searching for statistically significant regulatory modules.

    Bioinformatics 2003, 19 Suppl 2:II16-II25. PubMed Abstract | Publisher Full Text OpenURL

  9. Rajewsky N, Vergassola M, Gaul U, Siggia ED: Computational detection of genomic cis-regulatory modules applied to body patterning in the early Drosophila embryo.

    BMC Bioinformatics 2002, 3(1):30. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  10. Sinha S, van Nimwegen E, Siggia ED: A probabilistic method to detect regulatory modules.

    Bioinformatics 2003, 19 Suppl 1:i292-301. PubMed Abstract | Publisher Full Text OpenURL

  11. Frith MC, Li MC, Weng Z: Cluster-Buster: Finding dense clusters of motifs in DNA sequences.

    Nucleic Acids Res 2003, 31(13):3666-3668. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Johansson O, Alkema W, Wasserman WW, Lagergren J: Identification of functional clusters of transcription factor binding motifs in genome sequences: the MSCAN algorithm.

    Bioinformatics 2003, 19 Suppl 1:i169-76. PubMed Abstract | Publisher Full Text OpenURL

  13. Gupta M, Liu JS: De novo cis-regulatory module elicitation for eukaryotic genomes.

    Proc Natl Acad Sci U S A 2005, 102(20):7079-7084. PubMed Abstract | Publisher Full Text OpenURL

  14. Rebeiz M, Reeves NL, Posakony JW: SCORE: a computational approach to the identification of cis-regulatory modules and target genes in whole-genome sequence data. Site clustering over random expectation.

    Proc Natl Acad Sci U S A 2002, 99(15):9888-9893. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  15. Markstein M, Markstein P, Markstein V, Levine MS: Genome-wide analysis of clustered Dorsal binding sites identifies putative target genes in the Drosophila embryo.

    Proc Natl Acad Sci U S A 2002, 99(2):763-768. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  16. Lifanov AP, Makeev VJ, Nazina AG, Papatsenko DA: Homotypic regulatory clusters in Drosophila.

    Genome Res 2003, 13(4):579-588. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  17. Tagle DA, Koop BF, Goodman M, Slightom JL, Hess DL, Jones RT: Embryonic epsilon and gamma globin genes of a prosimian primate (Galago crassicaudatus). Nucleotide and amino acid sequences, developmental regulation and phylogenetic footprints.

    J Mol Biol 1988, 203(2):439-455. PubMed Abstract | Publisher Full Text OpenURL

  18. Blanchette M, Tompa M: Discovery of regulatory elements by a computational method for phylogenetic footprinting.

    Genome Res 2002, 12(5):739-748. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  19. Boffelli D, McAuliffe J, Ovcharenko D, Lewis KD, Ovcharenko I, Pachter L, Rubin EM: Phylogenetic shadowing of primate sequences to find functional regions of the human genome.

    Science 2003, 299(5611):1391-1394. PubMed Abstract | Publisher Full Text OpenURL

  20. Sumiyama K, Kim CB, Ruddle FH: An efficient cis-element discovery method using multiple sequence comparisons based on evolutionary relationships.

    Genomics 2001, 71(2):260-262. PubMed Abstract | Publisher Full Text OpenURL

  21. Grad YH, Roth FP, Halfon MS, Church GM: Prediction of similarly acting cis-regulatory modules by subsequence profiling and comparative genomics in Drosophila melanogaster and D.pseudoobscura.

    Bioinformatics 2004, 20(16):2738-2750. PubMed Abstract | Publisher Full Text OpenURL

  22. Lenhard B, Sandelin A, Mendoza L, Engstrom P, Jareborg N, Wasserman WW: Identification of conserved regulatory elements by comparative genome analysis.

    J Biol 2003, 2(2):13. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  23. Loots GG, Ovcharenko I, Pachter L, Dubchak I, Rubin EM: rVista for comparative sequence-based discovery of functional transcription factor binding sites.

    Genome Res 2002, 12(5):832-839. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  24. Yuh CH, Brown CT, Livi CB, Rowen L, Clarke PJ, Davidson EH: Patchy interspecific sequence similarities efficiently identify positive cis-regulatory elements in the sea urchin.

    Dev Biol 2002, 246(1):148-161. PubMed Abstract | Publisher Full Text OpenURL

  25. Hertz GZ, Stormo GD: Identifying DNA and protein patterns with statistically significant alignments of multiple sequences.

    Bioinformatics 1999, 15(7-8):563-577. PubMed Abstract | Publisher Full Text OpenURL

  26. Hughes JD, Estep PW, Tavazoie S, Church GM: Computational identification of cis-regulatory elements associated with groups of functionally related genes in Saccharomyces cerevisiae.

    J Mol Biol 2000, 296(5):1205-1214. PubMed Abstract | Publisher Full Text OpenURL

  27. van Helden J, Andre B, Collado-Vides J: Extracting regulatory sites from the upstream region of yeast genes by computational analysis of oligonucleotide frequencies.

    J Mol Biol 1998, 281(5):827-842. PubMed Abstract | Publisher Full Text OpenURL

  28. Abnizova I, te Boekhorst R, Walter K, Gilks WR: Some statistical properties of regulatory DNA sequences, and their use in predicting regulatory regions in the Drosophila genome: the fluffy-tail test.

    BMC Bioinformatics 2005, 6(1):109. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  29. Hutchinson GB: The prediction of vertebrate promoter regions using differential hexamer frequency analysis.

    Comput Appl Biosci 1996, 12(5):391-398. PubMed Abstract OpenURL

  30. Nazina AG, Papatsenko DA: Statistical extraction of Drosophila cis-regulatory modules using exhaustive assessment of local word frequency.

    BMC Bioinformatics 2003, 4(1):65. PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  31. Schroeder MD, Pearce M, Fak J, Fan H, Unnerstall U, Emberly E, Rajewsky N, Siggia ED, Gaul U: Transcriptional control in the segmentation gene network of Drosophila.

    PLoS Biol 2004, 2(9):E271. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  32. [http://webdisk.berkeley.edu/~dap5/] webcite

  33. Wingender E, Chen X, Fricke E, Geffers R, Hehl R, Liebich I, Krull M, Matys V, Michael H, Ohnhauser R, Pruss M, Schacherer F, Thiele S, Urbach S: The TRANSFAC system on gene expression regulation.

    Nucleic Acids Res 2001, 29(1):281-283. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  34. Baldi P, Brunak S, Chauvin Y, Andersen CA, Nielsen H: Assessing the accuracy of prediction algorithms for classification: an overview.

    Bioinformatics 2000, 16(5):412-424. PubMed Abstract | Publisher Full Text OpenURL

  35. Mitchell TM: Machine Learning. In McGraw-Hill series in computer science. New York , McGraw-Hill; 1997:xvii, 414 p.. OpenURL