Abstract
Background
Recently, information derived by correlated mutations in proteins has regained relevance for predicting protein contacts. This is due to new forms of mutual information analysis that have been proven to be more suitable to highlight direct coupling between pairs of residues in protein structures and to the large number of protein chains that are currently available for statistical validation. It was previously discussed that disulfide bond topology in proteins is also constrained by correlated mutations.
Results
In this paper we exploit information derived from a corrected mutual information analysis and from the inverse of the covariance matrix to address the problem of the prediction of the topology of disulfide bonds in Eukaryotes. Recently, we have shown that Support Vector Regression (SVR) can improve the prediction for the disulfide connectivity patterns. Here we show that the inclusion of the correlated mutation information increases of 5 percentage points the SVR performance (from 54% to 59%). When this approach is used in combination with a method previously developed by us and scoring at the state of art in predicting both location and topology of disulfide bonds in Eukaryotes (DisLocate), the perprotein accuracy is 38%, 2 percentage points higher than that previously obtained.
Conclusions
In this paper we show that the inclusion of information derived from correlated mutations can improve the performance of the state of the art methods for predicting disulfide connectivity patterns in Eukaryotic proteins. Our analysis also provides support to the notion that improving methods to extract evolutionary information from multiple sequence alignments greatly contributes to the scoring performance of predictors suited to detect relevant features from protein chains.
Background
Disulfide bonds are covalent crosslinks between cysteine side chains that play very important roles in the native structures of globular proteins. Folding, stability, and ultimately function of secreted proteins in cells are influenced by the formation of disulfide bonds between cysteine residues [1]. Predicting the topology and the location of disulfide bridges in a protein from its sequence therefore plays a relevant role in protein structural and functional annotation. Several computational methods are presently available for computing cysteine properties in a protein sequence and they can be grouped into: i) methods that predict the disulfide bonding state [24]; ii) methods that predict the topological connectivity patterns by assuming that the cysteine bonding state is known [58]; iii) methods that compute both i) and ii)[912]. Recently we developed DisLocate, a twostage method for disulfide bond prediction in Eukaryotes comprising two integrated modules. The first based on Conditional Random Fields (CRFs) predicts the cysteine bonding state; the second based on a Support Vector Regression (SVR) predicts the topology of the disulfide bridges [12]. DisLocate improved over previous methods by introducing for the first time the information of the protein subcellular localization in the prediction of the disulfide bonding state [12].
Here we address the problem of improving the second step of the prediction, namely the prediction of disulfide connectivity pattern, by exploiting the role of correlated mutations. Correlated mutation analysis aims at elucidating relations between pairs of residues in the protein structure that may influence its folding. Routinely, this is done through the identification of the coevolution of different positions in a multiple sequence alignment. The notion of correlated mutation describes that an unfavourable residue mutation in a structural contact can be compensated by the simultaneous change of the direct partner in such a way that the original interaction is preserved (compensatory mutation) [13]. It has been recently observed that with sufficient and correct information about protein residueresidue contacts it is possible to predict some protein structures from the residue chain [1316].
Correlated mutation analysis was also introduced in the context of disulfide bond connectivity prediction. Simple correlation patterns of concerted appearing and disappearing cysteines in multiple structural alignments were used to predict the topology of disulfide bonds in proteins [17].
In the present paper we propose the usage of information derived from correlated mutations to improve the prediction of disulfide connectivity over a set proteins including 1797 chains (PDBCYS). We evaluate two different approaches of computing the correlated mutations: corrected mutual information (MIp) and sparse inverse covariance estimation (iCOV). MIp is a corrected version of mutual information specifically designed to remove the background noise due to both phylogenetic and entropic biases [18]. The latter approach (iCOV) which is based on sparse inverse covariance estimation was recently introduced for the problem of predicting contact maps [20]. Here we combine information derived with both methods for computing correlated mutations with features that were previously found relevant for predicting the disulfide connectivity and implemented in our DisLocate [12]. In order to highlight the effect of correlated mutations we benchmark the newly developed predictors on the same dataset (PDBCYS) previously adopted to evaluate DisLocate [12]. Our results show that correlated mutation analysis adds to the previously introduced features and improves the prediction scores. This indicates that correlated mutations are a significant piece of information also when computing the connectivity pattern of disulfide bridges in protein structures.
Methods
Mutual information among cysteines
Mutual Information (MI) can be used to provide a measure of the coevolution of two positions in a protein sequence. In protein structures the measures of coevolution and MI in particular have been extensively applied for predicting residue contacts in proteins [1316]. Here we focus only on sequence positions that contain cysteine residues. We then compute a multiple sequence alignment for each protein of interest and we extract the positions that correspond to cysteines in the query sequences. By this, we end up with subalignments that contain as many columns as the number of cysteines that are present in the query sequence. The Mutual Information MI between cysteines i and j is then computed as follows:
where f_{i}(a) and f_{j}(b) are the relative frequencies of amino acid types a and b at position i and j, respectively, and f_{i,j}(a,b) is the relative frequency of the amino acid pair ab at positions ij.
The MI metric suffers of several drawbacks mainly due to entropic effects and phylogenetic biases that reduce its efficacy in predicting residue contacts [18]. The entropic bias occurs when a given position in the multiple alignment exhibits a high variability (entropy). These positions tend to have higher level of MI than those with a lesser entropy [18]. The phylogenetic bias is due to the phylogenetic relationships between organisms represented in the alignment that may generate an uneven distribution of sequence residues [18]. In order to overcome these issues, it has been proposed to correct the MI values as computed in Equation 1 by the so called average product correction (APC) [18]. APC measures the background signal of MI due to entropic and phylogenetic biases. This corrected metric is called MIp. The MIp for positions i and j is then obtained as follows:
where is the average mutual information between position i and all other positions (analogously for position j) and is the average mutual information of all positions.
Sparse inverse covariance estimation
In recent works it has been pointed out that it is possible to improve the coevolutionary information using the inverse of the covariance matrix [19,20]. In particular, using information stored into the inverse of the covariance matrix, the performance of contact prediction improves significantly with respect to the simple MI or MIp by reducing the socalled indirect coupling effect i.e. the statistical dependency observed in multiple sequence alignment for residues that are structurally distant [1921]. One of the proposed approach (followed here), is based on sparse inverse covariance estimation and it is called PSICOV [20].
In this paper, we apply an approach similar to PSICOV to estimate the level of direct coupling between cysteine residues in proteins. As a result, given a protein with m cysteines, we obtained a m by m matrix whose elements can be interpreted as disulfide bonding scores. As described for MI in the previous section, we consider multiple sequence alignment constrained to positions corresponding only to cysteines in the query sequence. For a protein sequence with m cysteines, the sample covariance matrix can be then computed as follows:
where f_{i}(a), f_{j}(b) and f_{i,j}(a,b) are defined as in the previous section and S is a 21m by 21m covariance matrix (here we also include the gap as a 21st symbol).
Assuming that the covariance matrix can be inverted (the matrix is not singular), the inverse matrix provides information about the degree of direct coupling between different positions in the protein sequence [19,20]. Unfortunately, the covariance matrix can be singular (since we do not observe every amino acid in a given position of the alignment). In order to estimate the inverse matrix, authors proposed to use the sparse inverse covariance estimation by means of the graphical Lasso optimization procedure[22,23]. This procedure attempts to estimate the inverse covariance matrix by solving the following optimization problem:
where S is a dxd covariance matrix, Θ is the inverse covariance matrix and the last term is a regularization term (the ℓ_{1}norm of the inverse matrix) that favors the sparsity of the solutions. ρ is a hyperparameter that governs the level of desired sparsity (the greater is ρ the sparser is the solution). The disulfide bonding score between cysteines i and j of the protein is computed as follows:
where the summation over a and b is taken by excluding gaps. Finally, the same average product correction is used here to adjust the value for background noise as described for MIp:
where is the mean contact score between position i and all other positions (analogously for position j) and is the overall mean contact score. We refer to this bonding score as iCOV in the rest of the paper.
Predicting disulfide connectivity patterns
Once the cysteine bonding state is assigned, we predict the connectivity pattern of the subsets of proteins that contain at least a pair of cysteines in the bonding state by applying a Support Vector Regression approach [12]. The SVR predictions of each possible pair of cysteines is used as edge weight and the EdmondGabow algorithm is adopted to predict the most probable disulfide pattern [5]. In order to evaluate SVR, we use the same 20fold cross validation procedure described before [12], considering only proteins with at least two disulfide bridges. SVRs were trained using an input encoding based on global and local information. The global information (that does not depend on each particular cysteine pair) is defined by the Normalized Protein Length (one real value), the Protein Molecular Weight (one real value) and the protein amino acid composition (20 real values). The local pairwise encoding (that depends on each particular cysteine pair) consists of the following descriptors:
• two PSSMbased windows centered on the cysteines forming the pairs. We used a window of length 13, the best performing among the differentsized windows we tested. With this choice, we ended up with a vector of 13 * 20 * 2 = 520 components;
• the Relative Order of the Cysteines. This feature is encoded with 2 real values that represent the normalized relative order of a cysteines pair. Given a protein with n cysteines (C1,C2,...,Cn), the corresponding normalized ordered list of cysteines is given by (1/n, 2/n,...,n/n). For each pair of cysteines, the corresponding values are then taken from the list (e.g. the pair (C1,C4) is encoded as (1/n,4/n));
• the Cysteine Separation Distance. This feature is encoded with 1 real value that represents the logcysteine sequence separation computed as SEP(Ci,Cj) = log (j  i) where i and j are sequence positions of cysteines Ci and Cj, respectively.
• Correlated mutation information, based on MIp and/or iCOV.
Dataset description
In this study we used the dataset PDBCYS introduced before [12]. From PDB (release May 2010) we extracted 1797 Eukaryotic protein structures with resolution <2.5 Å with at least two cysteine residues and global pairwise sequence similarity <25%. PDBCYS includes 7619 free and 3194 bonded cysteines. Since PDBCYS contains pairs of proteins with detectable local sequence similarity, we clustered all the chains using a local sequence similarity score. First, we ran a BLAST sequence search using all the proteins of the set versus themselves. Then, for each pair of proteins we selected the higher bidirectional (say p1 vs p2 or p2 vs p1) sequence identity as reported in the BLAST output. We subsequently treated the proteins as nodes of a graph and assigned an edge between two nodes only where local sequence identity between the corresponding protein sequences was > 25%. In addition, we computed the connected components of the graph and treated each group of nodes as a protein cluster. Finally, the clusters were grouped in 20 disjoint sets used to train and test the method. We used these 20 subsets to evaluate our method and to compare its performance with previous approaches by adopting a 20fold crossvalidation procedure.
Performance measures
In the following N_{c }is the number of correctly predicted bonds, N_{p }is the total number of predicted bonds, N_{b }is the total number of observed bonds, N_{patt }is number of correctly predicted disulfide connectivity pattern and N is the total number of chains.
To score the disulfide connectivity prediction we computed the following indices:
• the precision P_{b}:
• the recall R_{b}:
• the Q_{p}:
For sake of readability in the Tables we report the indices in percentage (i.e. the obtained values are multiplied by 100).
Technical details
All multiple sequence alignments used to compute both the MIp and the iCOV features have been generated by running 3 iterations of the jackhmmer program which is a part of the HMMER 3.0 package (http://hmmer.org webcite) against the UNIREF90 sequence database. The inverse covariance estimation was performed by means of the glasso R package available at the CRAN archive (http://cran.rproject.org/web/packages/glasso/index.html webcite), the same used in [12]. All the estimations have been performed using the exact algorithm of the glasso code (see glasso package documentation for details). glasso algorithm depends on a parameter ρ that conditions the sparsity of the reconstructed inverse covariance matrix. This parameter also affects the algorithm run time: the smaller is ρ the longer is the required time. Below we report the results obtained when ρ is set to 1e8, that was chosen as tradeoff between the computational time and the method performance (computed on the validation sets). MIp values were computed as described in [18]. For the SVR implementation we used the libsvm package (http://www.csie.ntu.edu.tw/~cjlin/libsvm/ webcite) with a RBF kernel.
Results and discussion
Prediction of disulfide connectivity with known bonding state
In order to evaluate the effect of correlated mutations in the task of predicting the topology of disulfide bonds, we first assume that disulfide bonded cysteines are known. We evaluated the performance of methods considering subsets of proteins with a different number of disulfide bonds (from 2 to 5). The reported accuracy was obtained using the same 20fold cross validation procedure previously described [12].
In Table 1 the results obtained by evaluating only the correlated mutation information are listed. Both MIp and iCOV are evaluated as unsupervised predictors. This was done by considering the correlated mutation values computed with the MIp and iCOV algorithms as a measure of the extent of the interaction between pair of cysteines without applying any supervised learning procedure. We constructed two simple predictors by directly interpreting MIp and iCOV as disulfide bonding potentials among cysteines and predicting the highest scoring set of cysteine pairs as the most probable disulfide connectivity pattern. The pattern selection was done by computing the maximumweight perfect matching with the EdmondGabow algorithm as previously described [5]. The performance of these unsupervised predictors reported in Table 1 (43.7445% of Qp and 49.951.7% of Pb), are significantly higher than a random predictor and higher than methods that do not include evolutionary information [5]. Differently from the case of contact prediction [20], in our case MIp routinely outperformed iCOV with the exception of the case of three disulfide bonds, where iCOV obtained the highest score.
Table 1. Performance on disulfide connectivity prediction obtained with correlated mutation measures
In Table 2 we report the performance of the SVRbased predictors that include in their input the correlated mutation information. For sake of comparison, we also report the accuracy per protein of the best method based on SVR that does not take advantage of the correlated mutation information but exploits all the other input features described in the Method section (Table 2, under the column labelled SVR). SVR is equivalent to the second module of DisLocate [12]. From the data listed in Table 2, it is evident that when the correlated mutation information is included in the SVR input, the overall performance increases (compare SVR with SVR+iCOV and SVR+MIp). In both cases they outperform the baseline SVR predictor, in particular for proteins that contain 4 and 5 disulfide bonds (it was previously discussed that the difficulty of the prediction increases as the number of cysteines increases[5]). It is also worth noticing that iCOV seems to add more information with respect to MIp as indicated by the relative scoring values (columns SVR+iCOV and SVR+MIp). Since iCOV and MIp appear to capture different aspects of the correlation between cysteines, we also evaluated a SVRbased predictor that includes among its features both correlation measures (SVR+iCOV+MIp). In this case the performance of the SVR further increases and overpasses by 5 percentage points the recently published SVR method (second step of DisLocate in [12]).
Table 2. Performance on disulfide connectivity prediction obtained with different SVRbased methods
Prediction of disulfide connectivity with predicted bonding state
In real cases, when new protein sequences are analysed, it is not known if some of the cysteines are making disulfide bonds in the three dimensional structure of the protein. It is then useful evaluating the predictor accuracy starting from an unlabelled sequence and predicting both the disulfide bonding states and also the connectivity pattern. We evaluated the performance of the connectivity pattern predictor based on SVR+iCOV+MIp when the bonding state of cysteines is not known but it is predicted. For this purpose, we adopted the bonding state predictor previously introduced in DisLocate which is based on GrammaticalRestrained Hidden Conditional Random Fields [24] and protein subcellular localization [12]. In this case, we used the GRHCRF part of DisLocate to predict the bonding state and the new predictor to assign the connectivity pattern. For sake of comparison, we evaluate the method adopting the same experimental setup previously described and using the same crossvalidation procedure [12]. Results are shown in Table 3 and indicate that the improvement over DisLocate is 2 percentage points of accuracy per protein.
Table 3. Prediction without a prior knowledge of the cysteine bonding state
Prediction performance as a function of the quality of the multiple sequence alignments
MIp and iCOV are computed over multiple sequence alignments. We therefore evaluate how the number and the type of sequences included in the alignment (used to compute the correlation among cysteines residues) can affect the final result.
The number of aligned sequences in each multiple alignment can vary from sequence to sequence. We evaluate the dependence of the method performance on the number of sequences by computing Qp at increasing threshold value of the number of proteins included in the multiple sequence alignment. The results are reported in Figure 1, where it is evident that the method has on average a lower performance on proteins, whose corresponding multiple sequence alignments contain ≤5000 sequences. Alternatively, when the number of aligned sequences is larger than 10000, the method on average optimally scores. However, a large number of aligned sequences may be not sufficient if the observed sequence variation is not adding any information. In order to highlight this effect, we evaluated the method performance as a function of the number of effective sequences in the alignment (NEFF score) [25]. NEFF is calculated as the exponential of the entropy value averaged over all columns of the multiplealignment: in this respect NEFF is also interpreted as the entropy of a sequence profile derived from the multiplealignment [25]. NEFF is a real value ranging from 1 to 20. Multiple sequence alignments consisting of very similar sequences (or singletons) have a NEFF value close to 1, while random (uniform) alignments generate a NEFF of 20. Figure 2 shows that also for the problem at hand, the larger the NEFF value the higher is the method performance, achieving the maximum at NEFF = 10 (in our dataset the maximum value is 11). These findings are in agreement with the notion that the more representative is the multiple sequence alignment, both in terms of sequence abundance and diversity, the higher is the expected predictive performance of the method [19,20].
Figure 1. Scoring the method at increasing number of sequences in the MSA. The accuracy per protein (Qp) of the different methods is plotted as a function of the number of protein chains in the multiple sequence alignment (MSA quality) used to derive information on correlated mutations. MIp: corrected Mutual Information; iCOV: sparse inverse COVariance estimation; SVR: Support Vector Regression; and their combinations as indicated. For details see Methods.
Figure 2. Scoring the method at increasing NEFF value. The accuracy per protein (Qp) of the different methods is plotted as a function of the NEFF value (NEFF = 1 single sequence, NEFF = 20 random) [25]. MIp: corrected Mutual Information; iCOV: sparse inverse COVariance estimation; SVR: Support Vector Regression; and their combinations as indicated. For details see Methods.
Conclusions
The prediction of protein structures from their sequences it is still an open problem in Structural Bioinformatics, especially considering that the disproportion between the number of putative protein sequences with respect to the number of known 3D structures is exponentially increasing. The bonding state of cysteines plays a relevant role in stabilizing the tertiary folds of proteins, in defining protein functions and in triggering functionally relevant conformational changes [26]. The knowledge of disulfide bonds is very important to predict the protein structure in ab initio and comparative modelling since it poses constraints to the possible chain conformations [27,28]. In this paper we introduce a new method to predict disulfide bonds starting from protein sequence. We investigate the effect of the information derived from correlated mutations on the problem of predicting the topology of disulfide bonds in proteins. We show that correlated mutations in the form of corrected mutual information (MIp) and inverse of covariance matrix (iCOV) carry a significant quantity of information that was not completely exploited before for the task of disulfide bond prediction. We present a new method that implementing information derived from correlated mutations improves the performance over the state of the art method DisLocate [12]. Finally, we highlight that the optimal performance of the method can be achieved when the number of sequences included in the multiple alignment from where information on correlated mutation is derived is in the range of 10000 protein chains and the correspondent NEFF value of the alignment is greater or equal to 10.
Authors' contributions
CS carried out all the calculations. CS, PF, RC and PLM conceived the study, analyzed the data and wrote the manuscript. All the authors have read and approved the final manuscript.
Competing interests
The authors declare that there are no competing interests.
Declarations
The publication costs of this article were funded by the RFO (Ricerca Fondamentale Orientata) 2011, University of Bologna, awarded to Rita Casadio.
This article has been published as part of BMC Bioinformatics Volume 14 Supplement 1, 2013: Computational Intelligence in Bioinformatics and Biostatistics: new trends from the CIBB conference series. The full contents of the supplement are available online at http://www.biomedcentral.com/bmcbioinformatics/supplements/14/S1 webcite.
Acknowledgements
RC thanks the following grants: PRIN 2009 project 009WXT45Y (Italian Ministry for University and Research: MIUR), COST BMBS Action TD1101(European Union RTD Framework Programme), and PON project PON01_02249 (Italian Ministry for University and Research: MIUR). CS is a recipient of a Ph.D. fellowship from the Ministry of the Italian University and Research.
References

Inaba K: Structural basis of protein disulfide bond generation in the cell.
Genes Cells 2010, 15(9):93543. PubMed Abstract  Publisher Full Text

Martelli PL, Fariselli P, Malaguti L, Casadio R: Prediction of the disulfide bonding state of cysteines in proteins with hidden neural networks.
Protein Eng 2002, 15(12):951953. PubMed Abstract  Publisher Full Text

MucchielliGiorgi MH, Hazout S, Tufféry P: Predicting the disulfide bonding state of cysteines using protein descriptors.
Proteins 2002, 46(3):243249. PubMed Abstract  Publisher Full Text

Chen YC, Lin YS, Lin CJ, Hwang JK: Prediction of the bonding states of cysteines using the support vector machines based on multiple feature vectors and cysteine state sequences.
Proteins 2004, 55(4):10361042. PubMed Abstract  Publisher Full Text

Fariselli P, Casadio R: Prediction of disulfide connectivity in proteins.
Bioinformatics 2001, 17(10):957964. PubMed Abstract  Publisher Full Text

Vullo A, Frasconi P: Disulfide connectivity prediction using recursive neural networks and evolutionary information.
Bioinformatics 2004, 20(5):653659. PubMed Abstract  Publisher Full Text

Ferrè F, Clote P: Disulfide connectivity prediction using secondary structure information and diresidue frequencies.
Bioinformatics 2005, 21(10):23362346. PubMed Abstract  Publisher Full Text

Song J, Yuan Z, Tan H, Huber T, Burrage K: Predicting disulfide connectivity from protein sequence using multiple sequence feature vectors and secondary structure.
Bioinformatics 2007, 23(23):31473154. PubMed Abstract  Publisher Full Text

Cheng J, Saigo H, Baldi P: Largescale prediction of disulphide bridges using kernel methods, twodimensional recursive neural networks, and weighted graph matching.
Proteins 2006, 62(3):617629. PubMed Abstract  Publisher Full Text

Taskar B, Chatalbashev V, Koller D, Guestrin C: Learning structured prediction models: a large margin approach. In Proceedings of the 22nd International Conference on Machine Learning (ICML '05). New York: ACM; 2005:896903. Publisher Full Text

Vincent M, Passerini A, Labbé M, Frasconi P: A simplified approach to disulfide connectivity prediction from protein sequences.
BMC Bioinformatics 2008, 9:20. PubMed Abstract  BioMed Central Full Text  PubMed Central Full Text

Savojardo C, Fariselli P, Martelli PL, Pierleoni A, Casadio R: Improving the prediction of disulfide bonds in Eukaryotes with machine learning methods and protein subcellular localization.
Bioinformatics 2011, 27(16):22242230. PubMed Abstract  Publisher Full Text

Gobel U, Sander C, Schneider R, Valencia A: Correlated mutations and residue contacts in proteins.
Proteins 1994, 18:309317. PubMed Abstract  Publisher Full Text

Olmea O, Valencia A: Improving contact predictions by the combination of correlated mutations and other sources of sequence information.
Fold Des 1997, 2:S25S32. PubMed Abstract

Fariselli P, Olmea O, Valencia A, Casadio R: Progress in predicting inter residue contacts of proteins with neural networks and correlated mutations.
Proteins 2001, 45(Suppl 5):157162. PubMed Abstract  Publisher Full Text

Di Lena P, Fariselli P, Margara L, Vassura M, Casadio R: Is there an optimal substitution matrix for contact prediction with correlated mutations?
IEEE/ACM Trans Comput Biol Bioinform 2011, 8:10171028. PubMed Abstract  Publisher Full Text

Rubinstein R, Fiser A: Predicting disulfide bond connectivity in proteins by correlated mutations analysis.
Bioinformatics 2008, 24(2):498504. PubMed Abstract  Publisher Full Text

Dunn SD, Wahl LM, Gloor GB: Mutual information without the influence of phylogeny or entropy dramatically improves residue contact prediction.
Bioinformatics 2008, 24(3):333340. PubMed Abstract  Publisher Full Text

Marks DS, Colwell LJ, Sheridan R, Hopf TA, Pagnani A, Zecchina R, Sander C: Protein 3D structure computed from evolutionary sequence variation.
PLoS ONE 2011, 6(12):e28766. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Jones DT, Buchan DWA, Cozzetto D, Pontil M, PSICOV: Precise structural contact prediction using sparse inverse covariance estimation on large multiple sequence alignments.
Bioinformatics 2011, 28(2):184190. PubMed Abstract  Publisher Full Text

Burger L, van Nimwegen E: Disentangling direct from indirect coevolution of residues in protein alignments.
PLoS Comput Biol 2010, 6(1):e1000633. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Banerjee O, El Ghaoui L, d'Aspremont A: Model selection through sparse maximum likelihood estimation for multivariate Gaussian or binary data. [http://jmlr.csail.mit.edu/papers/v9/banerjee08a.html] webcite

Friedman J, Hastie T, Tibshirani R: Sparse inverse covariance estimation with the graphical Lasso.
Biostatistics 2008, 9:432441. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Fariselli P, Savojardo C, Martelli PL, Casadio R: GrammaticalRestrained Hidden Conditional Random Fields for Bioinfomatics Applications.
Algorithms for Molecular Biology 2009., 4(13) PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Casbon J, Saqi M: Analysis of superfamily specific profileprofile recognition accuracy.
BMC Bioinformatics 2004., 5(200) PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Wedemeyer WJ, Welker E, Narayan M, Scheraga HA: Disulfide bonds and protein folding.
Biochemistry 2000, 39(15):42074216. PubMed Abstract  Publisher Full Text

Das R, Baker D: Macromolecular modeling with rosetta.
Annu Rev Biochem 2008, 77:363382. PubMed Abstract  Publisher Full Text

Sali A, Blundell TL: Comparative protein modelling by satisfaction of spatial restraints.
J Mol Biol 1993, 234:779815. PubMed Abstract  Publisher Full Text