Abstract
Background
The number of gene sequences that are available for comparative genomics approaches is increasing extremely quickly. A current challenge is to be able to handle this huge amount of sequences in order to build families of homologous sequences in a reasonable time.
Results
We present the software package SiLiX that implements a novel method which reconsiders single linkage clustering with a graph theoretical approach. A parallel version of the algorithms is also presented. As a demonstration of the ability of our software, we clustered more than 3 millions sequences from about 2 billion BLAST hits in 7 minutes, with a high clustering quality, both in terms of sensitivity and specificity.
Conclusions
Comparing stateoftheart software, SiLiX presents the best uptodate capabilities to face the problem of clustering large collections of sequences. SiLiX is freely available at http://lbbe.univlyon1.fr/SiLiX webcite.
Background
Proteins can be naturally classified into families of homologous sequences that derive from a common ancestor. The comparison of homologous sequences and the analysis of their phylogenetic relationships provide very useful information regarding the structure, function and evolution of genes. Thanks to the progress of sequencing projects, this comparative approach can now be applied at the whole genome scale in many different taxa, and several databases have been developed to provide a simple access to collections of multiple sequence alignments and phylogenetic trees [19]. The building of such phylogenomic databases involves three steps that require important computing resources: 1) compare all proteins to each other to detect sequence similarities, 2) cluster homologous sequences into families (that we will call the clustering step) and 3) compute multiple sequence alignments and phylogenetic trees for each family. With the recent progress of sequencing technologies, there is an urgent need to prepare for the deluge and hence to develop methods able to deal with a huge quantity of sequences. In this paper, we present a new approach for the clustering of homologous sequences, based on single transitive links (single linkage) with alignment coverage constraints and implemented in a software package (called SiLiX for SIngle LInkage Clustering of Sequences). We model the dataset as a similarity network where sequences are vertices and similarities are edges [10]. To overcome memory limitations we follow an online framework [11] in which we visit the edges one at a time to update the families dynamically. This approach enables also an incremental procedure where sequences and similarities are added into the dataset so that it would not be necessary to rebuild the families from scratch. Finally, we adopt a divideandconquer strategy to deal with the quantity of data [12] and design a parallel algorithm whose theoretical complexity is addressed in this paper.
We evaluated the computational performances and scalability of this method on a very large dataset of more than 3 millions sequences from the HOGENOM phylogenomic database [9]. Our approach presents several advantages over other clustering algorithms: it is extremely fast, it requires only limited memory and can be run on a parallel architecture  which is essential for ensuring its scalability to large datasets. SiLiX outperforms other existing software programs both in terms of speed and memory requirements. Moreover, it allows a satisfying quality of clustering. We discuss the interest of SiLiX for the clustering of homologous sequences in huge datasets, possibly in combination with other clustering methods.
Implementation
Modelling
Single linkage and filtering with alignment coverage constraints
The principle of the singlelinkage clustering is that if sequence A is considered homologous to sequence B, and B homologous to C, then A, B and C are grouped into the same family, whatever the level of similarity between A and C. The choice of the sequence similarity criteria that is used to infer homology is therefore an essential parameter of the singlelinkage clustering approach. Different criteria can be used, separately or in combination (percentage of identity, alignment score or Evalue, alignment coverage i.e. percentage of the length of the sequence that is effectively aligned). Then, if a pair of sequences (A, B) does not satisfy the criteria, the pair is not considered for the clustering. The choice of these criteria depends on the goal of the clustering.
The method presented in this paper was motivated by the development of databases of homologous genes (such as HOGENOM or HOVERGEN [9]). The goal of these databases is to allow the study of the evolution of entire proteins considered as a unit, in contrast to databases such as PFAM [13] or PRODOM [14] that aim at studying the domain architecture of proteins. Hence, in HOGENOM, proteins are classified in the same family only if they are homologous over their entire length  or almost. In practice, protein sequences are compared against each other with BLASTP [15]. For each pairwise alignment, the list of Highscoring Segment Pairs (HSPs) is analyzed to exclude HSPs that are not compatible with a global alignment (for details, see [9]). Then, proteins are classified in the same family if the remaining HSPs cover at least a given percentage of coverage of the longest protein with a percentage of identity greater or equal to a given threshold (see Figure 1). Therefore the first step of the clustering process consists in analyzing pairwise sequence alignments resulting from the allagainstall comparisons (typically a set of alignments obtained with BLAST [15]) in order to obtain a binary information: keeping or excluding pairs whether they meet or not these sequence similarity criteria. This step (that we will refer to as the filtering step) can be time consuming, but can be easily distributed (see below).
Figure 1. Single linkage clustering with alignment coverage constraints. The four proteins (A, B, C, D) contain some homologous domains (represented by colored boxes). To avoid the clustering in the same family of proteins that do not share any homology (e.g. A and D), pairwise sequence alignments are considered for the clustering only if they cover a minimum threshold of the length of each of the two proteins. This threshold has to be high enough to exclude cases like the alignment (B, C), which would lead to the clustering of A and D.
Sequence families are the connected components of the similarity network
Here we consider the second step: given a list of pairs of similar sequences previously positively filtered, group the sequences into families. We define an undirected graph G = (V, E) with the set of vertices V representing sequences and the sets of edges E representing similarities between these sequences. We define n = V  and m = E . Naturally, finding sequence families consists in computing the connected components of G. In this paper, we want to address the case of large n and m and we therefore develop a parsimonious approach in terms of memory use. We want to examine the edges online [11,16] and avoid storing them into a connectivity matrix. Therefore the classical Depthfirst search algorithm [17] is not adapted. By analogy with externalmemory graph algorithms [18], our approach consists in dynamically reducing the connected components into trees. When an edge is examined, we need to execute two operations: find the tree containing each of the two vertices and union these trees by merging their vertices into a new tree. Consequently, the connected component problem consists in (1) iteratively build a collection of trees representing the connected components of the graph G and (2) transform each resulting tree into a star tree which root is the representative (or leader) of the family. The final formulation of the problem is therefore building a spanning star forest G* = (V, E*).
Using a memoryefficient structure
The connected components of G actually form a partition of V into nonoverlapping subsets of vertices that we call disjointsets. Initially each vertex is a set by itself. We need to store the information of the partition and be able to update it dynamically. For this purpose, we use the disjointsets data structure [19,20] which is well suited when the graph is discovered edge by edge. This structure allows efficient implementation of the find and union operations by representing each set as a tree. Practically, the forest composed by all the trees is implemented as an array parent of size n. Each element i of a tree has a parent parent(i) such that parent(r) = r if r is the root of the tree. Moreover, it is straightforward and practical to transform each tree into a star tree such that the parent information is a common label for the vertices in a connected component. This will allow to directly retrieve each sequence family by reading the parent information.
Online procedure for a set of similarities
To build G* from a set of sequence similarities, we develop a two steps procedure. First, we adopt the algorithm called UnionFind by Rank with path compression [19,20]. It consists in updating trees of minimal height while discovering the edges of the graph G online. For this purpose, the rank of a vertex is basically defined as its height in the tree. Each edge (i, j) is processed as explained in Algorithm 1 (see also Figure 2). It is basically based on the FIND function that associates the root of the tree containing a vertex of interest and the PATHCOMPRESSION function which connects the vertices in a path to the root of a tree. The time complexity was proved to be in our case almost O(m) [20]. Secondly, we use PATHCOMPRESSION for each vertex in O(n) time. This procedure requires the storage of n parent and n rank values such that the memory requirements are O(n).
Figure 2. An example of the steps involved in the algorithm called UnionFind by rank with path compression [19,20]. Edges (first column, in red) are examined online. The disjointsets data structure, represented by trees (third column) and implemented using the parent array (second column), is consequently modified. The two vertices of the current edge of interest are colored in red.
Algorithm 1 ADDEDGE(i, j) by UNION FIND
Function: FIND (i): returns the root of the tree containing i
Function: PATHCOMPRESSION(i, r): parent of vertices in the path from i to the root of the tree containing i are set to r
1: r_{1 }← FIND(i); r_{2 }← FIND(j)
2: k ← arg max_{l = 1, 2 }(rank(r_{l }))
3: if rank(r_{1}) == rank(r_{2}) and r_{1 }≠ r_{2 }then
4: rank(r_{k})++
5: end if
6: PATHCOMPRESSION(i, r_{k})
7: PATHCOMPRESSION(j, r_{k})
Parallelization for multiple sets of similarities
We take advantage of the possibility of exploring series of sets of sequence similarities with a clientserver parallel architecture. We assume that it is usually affordable to split a large set into q sets. For the sake of clarity, we consider here a group of q processors, which is a reasonable hypothesis in practice. We note that it would also be recommended to have sets of comparable sizes. We adopt a divideandconquer strategy where different processors use the previous sequential algorithm to independently obtain a collection of spanning star forests where such that . These subsolutions are successively merged to obtain the final solution G* [12]. We first design an algorithm to merge two of these forests in O(n) time (see Algorithm 2). It is also based on the disjointsets data structure since, for each vertex i, it basically consists in adding in one forest a formal edge between i and the root of the tree containing i in the other forest. Then we build a parallel formulation of our approach [21,22] where are obtained with step (1) of the sequential algorithm and iteratively merged (see Algorithm 3). The parallel time complexity can be estimated as O(m/q + nq). We notice that the merge procedure is many orders of magnitude faster than the processing of a single set of similarities. For this reason, we decide not to distribute over the processors the merge procedures that will be consequently performed by the server processor in the order of the availability.
Algorithm 2 MERGE
Function: FIND(i): returns the root of the tree containing i
1: for all i such that FIND(i) ≠ i in do
2: r ← FIND(i) in
3: ADDEDGE(r, i) in
4: end for
Algorithm 3 Parallel SiLiX
1: each processor r builds with the sequential algorithm
2: if r > 1 client then
3: MPI_SEND to server processor 1
4: else
5: for k in 2,...p do
6: MPI_RECEIVE among in their order of availability
7: MERGE
8: end for
9: for all i in do
10: PATHCOMPRESSION(i, Find(i))
11: end for
12: end if
Dealing with partial sequences
Filtering
Because genome sequences are often not 100% complete and hence some genes may overlap with gaps in the genome assembly, it is important to be able to treat some partial protein sequences (as opposed to complete sequences). These partial sequences cannot be classified using the same criteria as the complete ones and are therefore treated separately. In a first step, gene families are built using only complete protein sequences as explained previously. In a second step, partial sequences are added to this classification, using different alignment length thresholds (for details about parameters, see [9]). It is important to note that, if there are several families that meet these alignment coverage criteria, a partial sequence is included in the one with which it shows the strongest similarity score.
Modelling
To allow the treatment of partial sequences, we propose a modified version of our approach. We redefine the previously mentioned graph G = (V_{c}, E_{c}) and we define the undirected graph H = G ∪ (V_{p}, E_{p}) with two sets of vertices V_{c }and V_{p}, the complete and partial sequences respectively, and the set of edges E_{p }between complete and partial sequences, each edge in E_{p }being weighted by the similarity score. We also impose that edges between partial sequences are not allowed. In this case, n_{c }= V_{c}, n_{p }= V_{p}, n = n_{c }+ n_{p}, m_{c }= E_{c}, m_{p }= E_{p} and m = m_{c }+ m_{p}. At this point, we note that sequence families correspond to the connected components of a subgraph of H obtained by only conserving the edge of maximum weight for each vertex in V_{p}: this will guarantee that each partial sequence is connected to only one complete sequence and prevent partial sequences to link two connected components. As described previously, the problem consists in building a novel graph that has the following properties:
• H* is a spanning star forest,
• H* is called a semibipartite graph, i.e. a graph that can be partitioned into two exclusive and comprehensive parts (V_{c }and V_{p}) with internal edges (connecting vertices of the same part) only existing within one of the two parts [23]. The particularity is here that edges between the two parts are weighted,
• ∀v ∈ V_{p}, deg(v) = 1.
Online procedure and parallelization
First, it is necessary to insert an additional step between the two steps of the abovementioned online procedure: build a subset of E_{p }by selecting for each vertex the edge of maximal weight, in O(m_{p}) time. Then we extend the step (2) to all the vertices in V_{p }for a time complexity in O(n). This procedure runs in O(n) space since it requires the storage of n parent values. For the parallelized algorithm, we modify the merging of two forests presented in Algorithm 2 to consider vertices of V_{p }and once again select edges of maximal weight, such that the overall parallel complexity can be estimated to be in O(m/q+ nq).
The SiLiX software package
All the presented algorithms are implemented into the SiLiX software package which is written in ANSI C++ and uses MPI (Message Passing Interface) and elements of the wellestablished Boost library http://www.boost.org webcite. SiLiX can take two kinds of input. First, the user can provide the result file of an allagainstall BLAST search (genomic or protein sequences) in tabular format (option outfmt 6 in BLAST). In that case, SiLiX performs the filtering step by analyzing BLAST hits to search for pairs of sequences that fulfill similarity criteria (alignment coverage, sequence identity) set by the user to build families. In this mode, partial sequences can be treated separately, as described above. Second, if the user prefers to use other types of criteria for the filtering, SiLiX can simply take as input a list of pairs of sequences IDs and perform the clustering step. Compilation and installation are compliant with the GNU standard procedure. The package is freely available on the SiLiX webpage http://lbbe.univlyon1.fr/SiLiX webcite. Online documentation and man pages are also available. SiLiX is licensed under the General Public License http://www.gnu.org/licenses/licenses.html webcite.
Results and Discussion
SiLiX is faster and more memory efficient than other methods
To test SiLiX and compare it to stateoftheart programs, we extracted protein sequences from the HOGENOM database (Release 5, [9]). The current release of HOGENOM contains 3,666,568 protein sequences (76% bacteria, 3% archae and 20% eukarya). We selected 3,159,593 nonredundant sequences including about 1% partial sequences. Sequences were compared against each others with BLASTP [15] with an Evalue threshold set to 10^{4}. The BLAST output file contained 1,905,335,339 pairwise alignments. Then we selected three previously published programs, for which the source code is publicly available: hcluster_sg [24] and MCUPGMA [25] that are based on hierarchical clustering, and MCL [26] that relies on graphbased heuristics.
The clustering of the protein dataset with SiLiX was very fast (about 2 hours) and required only limited memory capacity (0.4 GB). SiLiX outperformed the 3 other methods, both in terms of speed and RAM usage (see Table 1). The program hcluster_sg took 40 times more time than SiLiX to perform the clustering (about 4 days), and required a very large amount of RAM memory (99 GB). With larger sequence datasets (which are already present in databases), the RAM requirements of hcluster_sg will certainly exceed computer memory resources presently available. MCL also required a large amount of memory (78 GB) and was very slow (we stopped it after 10 days of calculation, before it finished the clustering). MCUPGMA is almost as efficient as SiLiX in terms of RAM usage, but requires ample disk space to hold intermediate files (49 GB of HDD). The main problem with MCUPGMA is that it is too slow on such a large dataset. MCUPGMA uses an iterative procedure to cluster sequences. On our dataset, the first 20 iterations took 2 days. The authors of MCUPGMA tested their method on a smaller dataset and they indicate in their article that 200 iterations were necessary to reach convergence (see [25]). We therefore extrapolated that MCUPGMA would take more than 20 days on our dataset, and hence we decided to stop it before it finished the clustering. Note also that to optimize the performance of MCUPGMA, the authors recommend using very permissive similarity threshold (Evalue = 100, see [25]), which is unaffordable given the number of sequences in our dataset. In conclusion, SiLiX presents the best efficacy to tackle the challenge of huge dataset analysis with CPU and memory requirements equivalent to those of a laptop computer. Note that SiLiX may also be used in combination with other methods. To test this strategy, we first ran SiLiX with permissive similarity thresholds (sequence identity 25% and alignment coverage 80%), and then we used hcluster_sg to subdivide families of more than 100 sequences. This combined procedure still runs in a reasonable total CPU time (about 9 hours, i.e. 10 times faster than hcluster_sg alone, see Table 1) and also divides by 4 the RAM usage. Furthermore the second step of this combined procedure can easily be distributed on several computers.
SiLiX is scalable in practice
As the number of available sequences increases dramatically and the number of similarities is quadratic with this number of sequences, the CPU time required for the clustering is expected to increase very rapidly. To ensure the scalability of our method, we designed a parallel implementation of SiLiX with a low number of interprocessors communications to take advantage of multiple kinds of parallel hardware architectures. This algorithm delocalizes the processing of the sequence similarity dataset, including the filtering step, and merges the results in a last step (see Methods). We designed a divideandconquer approach that requires only q  1 communications where q is the number of processors, with a procedure for merging partial results from two processors that is considerably faster than the independent computations on each processor. For these reasons, we observe practical performances consistent with the theoretical complexity such that the run time decrease is inverselyproportional to the number of processors (see Figure 3).
Figure 3. CPU time of the parallelized version of SiLiX(plain) according to the number of processors on the dataset of similarity pairs extracted from the HOGENOM database [9], compared with theoretical values (dashed). Run on a cluster of 2 octobicore Opteron 2.8 Ghz and 2 octoquadcore Opteron 2.3 GHz.
Clustering quality
Although the speed and memory requirements are important parameters for the choice of clustering method, the most important criterion is of course the quality of the results. Single linkage clustering is known to be problematic because spurious similarities can lead to the clustering of nonhomologous sequences. Even with stringent sequence similarity criteria, single linkage clustering can lead to erroneous clustering, because of the socalled problem of "domain chaining" [27], as illustrated in Figure 1. To avoid this problem, SiLiX performs single linkage clustering with alignment coverage constraints, i.e. pairs of similar sequences are considered for the clustering only if they meet two criteria: i) the alignment should cover at least a given percentage of the longest sequence; ii) sequence similarity within the alignment should exceed a given threshold. To assess the quality of SiLiX clustering, we used 2 different strategies. First, we compared clustering results to the classification of protein families reported in the InterPro database [28]. Second we assessed the performance of SiLiX on a set of 13 families of orthologous genes encoded by mitochondrial genomes in 1821 metazoan species.
Evaluation of SiLiX performances with Interpro
We evaluated the performance of SiLiX on the HOGENOM dataset, using the procedure proposed by Loewenstein and colleagues [25]: we extracted the most frequent correspondence between SiLiX families and protein (not domain) families from InterPro (Release 22, [28]) containing more than 10 sequences, and then we calculated the specificity and sensitivity of SiLiX classification with respect to the InterPro family. We also computed the Jaccard score (see [25]), which is a standard metric of the tradeoff between specificity and sensitivity. To evaluate the impact of sequence similarity criteria, we ran SiLiX with different thresholds for alignment coverage and percentage of identity. The performance of SiLiX were compared to those obtained with hcluster_sg, used alone or in combination with SiLiX. (NB: the 2 other methods, MCUPGMA and MCL, could not be evaluated because of their excessive running time). As expected, increasing the alignment coverage and/or the sequence identity thresholds leads to increase specificity (Figure 4a), but decreases sensitivity (Figure 4b). The best tradeoff between specificity and sensitivity was obtained for thresholds of 80% for alignment coverage and 35% for sequence identity (Figure 4c). With these parameters, the Jaccard score of SiLiX is slightly better than that of hcluster_sg (Table 2). Interestingly, the use of hcluster_sg in combination with SiLiX (with permissive threshold) leads to a better Jaccard score than hcluster_sg alone. Thus the use of SiLiX in combination with other methods can strongly decrease computing time without any loss in clustering quality.
Figure 4. Clustering performance evaluation based on InterPro classification. a) specificity, b) sensitivity and c) Jaccard coefficient of SiLiX, used on similarity pairs extracted from the HOGENOM database, with different values of threshold on the percentage of sequence identity and alignment coverage.
Table 2. Comparison of clustering performances of SiLiX and hcluster_sg (used alone or in combination with SiLiX).
Evaluation of SiLiX performances with metazoan mitochondrial gene families
We used InterPro to evaluate clustering performances because this database is widely recognized for its quality and it has already been used for that purpose [25]. This strategy may however not be optimal because the building of the InterPro database also relies on arbitrary sequence similarity criteria. Hence, some cases that were considered as false positives in the above evaluations might in fact correspond to true homologues (i.e. specificity would be underestimated). Ideally, to evaluate clustering quality, one would need a set of homologous gene families known a priori, i.e. identified without using sequence similarity criteria. The mitochondrial genome of metazoan taxa can provide such an ideal test set. Indeed, in animals the mitochondrial genome contains 13 proteincoding genes. These proteins show different levels of sequence conservation across taxa, but the gene content is extremely conserved: except in very rare cases, all metazoan mitochondrial genomes contain these 13 genes [29,30]. This very strong conservation of synteny allows the identification of orthologous genes, even with very low levels of sequence similarity. We extracted from RefSeq (Release 41, [31]) a set of complete mitochondrial genomes from 1821 different species. The 13 mitochondrial proteins are present in all taxa, except ATP8 that is missing in the genome of 6 species. These mitochondrial proteins were then added to the HOGENOM dataset. Sequence comparisons were performed with BLASTP (using parameters indicated above), and the clustering was performed with SiLiX on the entire dataset, using thresholds of 80% for alignment coverage and 35% for sequence identity. For each of the 13 gene families, the majority of sequences were grouped in a single SiLiX family. The sensitivity, measured as the number of known proteins that are included in this first SiLiX family, is generally very high: it is higher than 94% for 11 out of the 13 gene families, and even higher than 99% for 9 of them (Table 3). The ND6 family was split into 3 main SiLiX families corresponding respectively to deuterostomia, protostomia and other metazoa (porifera, placozoa and cnidaria), and containing overall 95% of all known ND6 proteins. The ATP8 protein is very short (about 50 aminoacids) and evolves rapidly. The largest SiLiX family contains only 53% of all known ATP8, and the three largest SiLiX families contain 77% of known sequences, whereas 14% of known ATP8 were not included in any SiLiX family  in most cases because they did not have any BLAST hit with a Evalue below 10^{4}. Thus, on this test set the sensitivity is generally very good, except for rapidly evolving sequences. To evaluate the specificity, we manually investigated all SiLiX families containing at least one protein of our mitochondrial set. We did not identify a single case where one mitochondrial protein was clustered with nonrelated proteins. Thus, even though the clustering was performed with the entire HOGENOM dataset (which contained more than 3 million different proteins), we did not detect any false positive clustering. This indicates that single linkage clustering with alignment coverage constraints is robust to spurious similarity matches.
Table 3. Evaluation of SiLiX performances on mitochondrial genes of metazoan taxa.
Conclusion
Different methods have been proposed for the clustering of proteins into families of homologous sequences [1,8,9,2426,32]. These methods differ both in terms of the quality of the clustering, and in terms of the computing resources required to perform the clustering. The singlelinkage clustering approach is used in different phylogenomic databases such as EnsemblCompara [8] or HOGENOM [9]. Here we propose a new implementation of the single linkage clustering method with alignment coverage constraints, SiLiX, which is extremely efficient, both in terms of computing time and memory requirements. Moreover, this method can be costeffectively run on parallel architectures, and hence is easily scalable. Thus, in terms of the computing resource requirements, this method is much more efficient than other available methods for the treatment of huge sequence datasets. In terms of clustering quality, SiLiX performs as well as hcluster_sg, the only other available clustering program that could be run in reasonable time on such a large sequence dataset. Given its speed, SiLiX may also efficiently be used as a first clustering step, before running other algorithms.
Availability and requirements
• Project name: SiLiX
• Project home page: http://lbbe.univlyon1.fr/SiLiX webcite
• Operating system(s): All Unixlike operating systems such as Linux and Mac OS X.
• Programming language: C++
• Other requirements: MPI, the Boost:program options class, and optionally CppUnit and the Boost:unordered_map class.
• License: GNU GPL.
Authors' contributions
VM developed the method and the software package. SP provided datasets and carried out the validation of the approach. LD initiated the work and participated in its coordination. All authors wrote the manuscript and gave final approval.
Acknowledgements and Funding
The authors would like to thank Bastien Boussau, Daniel Kahn, Vincent Lacroix, MarieFrance Sagot, Franck Picard and Eric Tannier for helpful discussions and comments, Bruno Spataro for the computing facilities and Yanniv Loewenstein, Jan Baumbach and Antje Krause for their answers about the availability and use of their programs. This work has been supported by the French Agence Nationale de la Recherche under grant NeMo ANR08BLAN030401.
References

Petryszak R, Kretschmann E, Wieser D, Apweiler R: The predictive power of the CluSTr database.
Bioinformatics 2005, 21:36043609. PubMed Abstract  Publisher Full Text

Meinel T, Krause A, Luz H, Vingron M, Staub E: The SYSTERS Protein Family Database in 2005.
Nucleic Acids Res 2005, 33:226229. Publisher Full Text

Dehal PS, Boore JL: A phylogenomic gene cluster resource: the Phylogenetically Inferred Groups (PhIGs) database.

Li H, Coghlan A, Ruan J, Coin LJ, Heriche JK, Osmotherly L, Li R, Liu T, Zhang Z, Bolund L, Wong GK, Zheng W, Dehal P, Wang J, Durbin R: TreeFam: a curated database of phylogenetic trees of animal gene families.
Nucleic Acids Res 2006, 34:572580. Publisher Full Text

Hartmann S, Lu D, Phillips J, Vision TJ: Phytome: a platform for plant comparative genomics.
Nucleic Acids Res 2006, 34:724730. Publisher Full Text

Tian Y, Dickerman AW: GeneTrees: a phylogenomics resource for prokaryotes.
Nucleic Acids Res 2007, 35:328331. Publisher Full Text

Wall PK, LeebensMack J, Muller KF, Field D, Altman NS, dePamphilis CW: PlantTribes: a gene and gene family resource for comparative genomics in plants.
Nucleic Acids Res 2008, 36:970976. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Vilella AJ, Severin J, UretaVidal A, Heng L, Durbin R, Birney E: EnsemblCompara GeneTrees: Complete, duplicationaware phylogenetic trees in vertebrates.
Genome Res 2009, 19:327335. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Penel S, Arigon AM, Dufayard JF, Sertier AS, Daubin V, Duret L, Gouy M, Perriere G: Databases of homologous gene families for comparative genomics.
BMC Bioinformatics 2009, 10(Suppl 6):S3. PubMed Abstract  BioMed Central Full Text  PubMed Central Full Text

Atkinson HJ, Morris JH, Ferrin TE, Babbitt PC: Using sequence similarity networks for visualization of relationships across diverse protein superfamilies.
PLoS ONE 2009, 4:e4345. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Fiat A, Woeginger JG, (Eds): Online Algorithms, The State of the Art. Volume 1442. Lecture Notes in Computer Science, Springer; 1998.

Das SK, Narsingh D: Divide and conquerbased optimal parallel algorithms for some graph problems on EREW PRAM model.
IEEE transactions on circuits and systems 1988, 35(3):312322. Publisher Full Text

Finn RD, Mistry J, Tate J, Coggill P, Heger A, Pollington JE, Gavin OL, Gunasekaran P, Ceric G, Forslund K, Holm L, Sonnhammer EL, Eddy SR, Bateman A: The Pfam protein families database.
Nucleic Acids Res 2010, 38:D211222. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Servant F, Bru C, Carrere S, Courcelle E, Gouzy J, Peyruc D, Kahn D: ProDom: automated clustering of homologous domains.
Brief Bioinformatics 2002, 3:246251. PubMed Abstract  Publisher Full Text

Altschul SF, Madden TL, Schaffer AA, Zhang J, Zhang Z, Miller W, Lipman DJ: Gapped BLAST and PSIBLAST: a new generation of protein database search programs.
Nucleic Acids Res 1997, 25:33893402. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Vishwanathan S: Randomized online graph coloring.
Journal of algorithms 1992, 13:657669. Publisher Full Text

Tarjan R: Depthfirst search and linear graph algorithms.
SIAM Journal on Computing 1972, 1(2):146160. Publisher Full Text

Katriel I, Meyer U: Elementary Graph Algorithms in External Memory.

Tarjan RE: Efficiency of a Good But Not Linear Set Union Algorithm.
Journal of the ACM 1975, 22(2):215225. Publisher Full Text

Alsuwaiyel MH: Algorithms: Design Techniques and Analysis. World Scientific Publishing Company; 1998.

Krishnamurthy A, Lumetta SS, Culler DE, Yelick K: Connected Components on Distributed Memory Machines.
Parallel Algorithms, DIMACS Series in Discrete Mathematics and Theoretical Computer Science 1997.

Han Y, Wagner RA: An efficient and fast parallelconnected component algorithm.
Journal of the ACM 1990, 37(3):626642. Publisher Full Text

Bramoulle Y, LopezPintado D, Goyal S, VegaRedondo F: Network formation and anticoordination games.
International Journal of Game Theory 2004, 33(1):119. Publisher Full Text

Ruan J, Li H, Chen Z, Coghlan A, Coin LJ, Guo Y, Heriche JK, Hu Y, Kristiansen K, Li R, Liu T, Moses A, Qin J, Vang S, Vilella AJ, UretaVidal A, Bolund L, Wang J, Durbin R: TreeFam: 2008 Update.
Nucleic Acids Res 2008, 36:D735740. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Loewenstein Y, Portugaly E, Fromer M, Linial M: Efficient algorithms for accurate hierarchical clustering of huge datasets: tackling the entire protein space.
Bioinformatics 2008, 24:i4149. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Enright AJ, Van Dongen S, Ouzounis CA: An efficient algorithm for largescale detection of protein families.
Nucleic Acids Res 2002, 30:15751584. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Joseph JM, Durand D: Family classification without domain chaining.
Bioinformatics 2009, 25:4553. Publisher Full Text

Hunter S, Apweiler R, Attwood TK, Bairoch A, Bateman A, Binns D, Bork P, Das U, Daugherty L, Duquenne L, Finn RD, Gough J, Haft D, Hulo N, Kahn D, Kelly E, Laugraud A, Letunic I, Lonsdale D, Lopez R, Madera M, Maslen J, McAnulla C, McDowall J, Mistry J, Mitchell A, Mulder N, Natale D, Orengo C, Quinn AF, Selengut JD, Sigrist CJ, Thimma M, Thomas PD, Valentin F, Wilson D, Wu CH, Yeats C: InterPro: the integrative protein signature database.
Nucleic Acids Res 2009, 37:D211215. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Boore JL: Animal mitochondrial genomes.
Nucleic Acids Res 1999, 27:17671780. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Signorovitch AY, Buss LW, Dellaporta SL: Comparative genomics of large mitochondria in placozoans.
PLoS Genet 2007, 3:e13. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Pruitt KD, Tatusova T, Klimke W, Maglott DR: NCBI Reference Sequences: current status, policy and new initiatives.
Nucleic Acids Res 2009, 37:D3236. PubMed Abstract  Publisher Full Text  PubMed Central Full Text

Wittkop T, Baumbach J, Lobo FP, Rahmann S: Large scale clustering of protein sequences with FORCE A layout based heuristic for weighted cluster editing.
BMC Bioinformatics 2007, 8:396. PubMed Abstract  BioMed Central Full Text  PubMed Central Full Text