Wearable technology can monitor rehabilitation
14 Dec 2012
Wearable technology is not only for sports and fashion enthusiasts it can also be used to monitor and aid clinical rehabilitation according to new research published in BioMed Central’s open access journal BioMedical Engineering OnLine.
Neurorehabilitation researchers from Italy have developed a low cost, wearable system, consisting of strain sensors made of conductive elastomers printed onto fabric. A low voltage battery powers the sensors, which are then able to send data to a computer via Bluetooth.
In this case study a wireless inertial sensor (MEMS) containing triaxial accelerometers and magnetometers was used to validate the accuracy of their results. Tested in a healthy subject the wearable sensors were used to collect a comprehensive set of over 600 different movements, at varying speeds and number of repetitions, over a range of movements. In all examples the wearable sensor was accurately able to measure movement.
This device will allow remote monitoring of physiotherapy exercises at home, posture, or flexibility during normal everyday tasks. Dr Michelangelo Bartolo who led this study explained, “So far we have only looked at trunk movements, which can be used to monitor flexibility and core stability. This system is not aimed at high precision but is an easy-to-use, inexpensive device, and is a real advancement in the development of portable, remote monitoring of rehabilitation.”
- ENDS -
Dr Hilary Glover
Scientific Press Officer, BioMed Central
Tel: +44 (0) 20 3192 2370
Mob: +44 (0) 778 698 1967
1. Estimation of human trunk movements by wearable strain sensors and improvement of sensor's placement on intelligent biomedical clothes
Paolo Tormene, Michelangelo Bartolo, Alessandro Marco De Nunzio, Federica Fecchio, Silvana Quaglini, Cristina Tassorelli and Giorgio Sandrini
BioMedical Engineering OnLine 2012, 11:95 doi:10.1186/1475-925X-11-95
Please name the journal in any story you write. If you are writing for the web, please link to the article. All articles are available free of charge, according to BioMed Central’s open access policy.
Article citation and URL available on request on the day of publication.
2. BioMedical Engineering OnLine is an open access, peer-reviewed journal that is dedicated to publishing research in all areas of biomedical engineering.
3. BioMed Central (http://www.biomedcentral.com/) is an STM (Science, Technology and Medicine) publisher which has pioneered the open access publishing model. All peer-reviewed research articles published by BioMed Central are made immediately and freely accessible online, and are licensed to allow redistribution and reuse. BioMed Central is part of Springer Science+Business Media, a leading global publisher in the STM sector. @BioMedCentral