A diagram flow describing the bioinformatic procedures applied in the M. perniciosa genome survey are depicted in Figure 1. After sequencing, a total of 124,565 reads were obtained and assembled using the whole genome shotgun strategy. During the initial assembly process, a large contig including 6,920 reads was found. This contig was identified as the mitochondrial genome of the fungus (RefSeq NC_005927), which comprised approximately 6% of M. perniciosa sequences 12. The remaining genome sequences were assembled resulting in 17,991 contigs and 7,065 singlets with average lengths of 1,300 bp and 455 bp, respectively. The largest contig consisted of 25,364 bp, and was formed by 513 reads. The sum of all reads was close to 75 Mbp and the total assembly consisted of 26.7 Mbp (Fig. 1).

Previous Feulgen-image analysis experiments estimated M. perniciosa genome size to be 32.98 ± 7.95 Mbp 10. Due to the large error in this estimation we decided to assess the genome size using the genome estimation protocol established in the dog genome survey 31 (more details in Additional File 1). This analysis resulted in a genome size ranging from 38.7 to 39.0 Mbp, a value similar to the genome length of another fungus belonging the order Agaricales, C. cinerea (37.5 Mbp), and that agrees with the previous size estimated by Feulgen-image analysis 10.

The Lander Waterman theory (LW) 34 and its applications 3536 were used to confirm the estimate of the M. perniciosa genome size. The theoretical values for the expected number of clusters (contigs + singlets), contigs, gaps, average cluster length and average gap length can be calculated using the LW theory from the effective average read length, the number of reads and the genome size as parameters. If the calculated values derived from the genome assembly were close to the theoretical values derived from LW calculations, then it is possible to confirm the estimated genome size. A summary of the results obtained from the assembly data and from the estimation using the LW theory is shown in Table 1. The experimental values agreed with the theoretical calculations, thus supporting our genome size estimation. According to LW analysis the average gap size was 413 pb. To have more information about the distribution of the gap size, we performed a comparison between a set of eukaryotic core proteins (generated by CEGMA pipeline 37) and M. perniciosa contigs (See Additional file 1). Using this methodology, we detected that the average gap size was around 500 ± 300 bp, corroborating with LW average gap size estimative (413 bp). Considering that most of the gaps are around 500 bp and that C. cinerea average gene size is 1,678 bp, the majority of M. perniciosa genes or partial gene regions are likely to be included in the contigs. Corroborating this notion, we have found all genes encoding proteins of essential metabolic pathways such as Glycolysis, Gluconeogenesis, Pentose Phosphate pathway, and several others, which are available in the website http://www.lge.ibi.unicamp.br/biocyc/MP (see below).

In order to estimate the number of sequences misassembled due to repeat regions, we applied the integrated pipeline for assembly validation, called amosvalidate 38 (Further information in Additional file 1). This analysis resulted in 664 contigs with overrepresented regions totaling 1.1 Mbp. Multiplying the number of bases in overrepresented regions by over-coverage estimate resulted in 7.4 Mbp of repeat regions in the genome. Since reads from repetitive regions were eliminated from the estimation of the genome length using dog genome survey protocol (Additional file 1), this misassembling does not invalidates the genome size estimate.

The initial step to uncover the gene content of M. perniciosa was performed using the genomic sequences together with a library of 3,145 ESTs, previously annotated and partially published 20. Genes were identified by comparing these two libraries using the program Exalin 39. This analysis allowed us to identify expressed genes and intron structure. The result was 2,002 ESTs aligned to the genome contigs. Based on this EST-genome sequence alignment, the average intron length was estimated as 52 bp. This information was then used in the next steps of the process.

A more detailed investigation of the gene content was carried out using a combination of ab initio (gene predictor programs) and comparative gene prediction (BLAST-EST sequence alignment). For ab initio gene prediction, we first applied the methodology described for the AUGUSTUS gene predictor 40http://augustus.gobics.de/binaries/retraining.html. This methodology essentially trains the AUGUSTUS program using a combination of sequences from the species of interest together with sequences of a phylogenetically related species, specifically with similarities in intron and exon length distributions. Using this approach, the coding content sensors (codon usage, GC content) are trained with sequences of the species of interest, and signal sensors (splice sites, TATA-box, polyadenilation sites, etc) are trained with the sequences of the related species. Sequences from C. cinerea were used in the training process; together with selected M. perniciosa ESTs with E-value in BLASTX-NR ≤ 1E-10. The sequences of the ESTs that aligned with proteins in the databank were concatenated, giving rise to a 240 Kbp sequence. Ten copies of this M. perniciosa EST concatamers (total of 2.4 Mbp) together with a dataset of genes from C. cinerea http://augustus.gobics.de/datasets, comprised of 1.2 Mbp, were used to "pre-train" AUGUSTUS. The M. perniciosa predictions that came out of this pre-training were compared with the protein databank NR using BLASTp. The resulting predictions with similarities in the NR databank, and with a coverage ≥ 90%, were selected. After eliminating redundancies, 134 complete (containing the start codon and stop codon) and 1,136 partial (without the start codon and/or stop codon) M. perniciosa gene models were used to train AUGUSTUS 40 and two other gene predictors (SNAP 41 and Genezilla 42). Predictions with less than 30 amino acids were eliminated. The remaining predictions were grouped into 19,932 overlapping clusters; that is, genomic regions covered by at least one prediction. The predictions in each overlapping cluster were ranked according to the criteria used by the Fungal Genome Initiative at the Broad Institute http://www.broad.mit.edu, with some adaptations. The ab initio gene finding pipeline generated 13,640 gene models, 9,560 of which contained significant similarity to GenBank sequences (Fig. 1 and Fig. 2).

The extrinsic prediction methodology consisted of a combination of genomic similarity searches (BLASTX) using contigs and singlets, with the alignment of M. perniciosa ESTs in the genomic clusters. 17,991 contigs and 7,065 singlets were submitted to similarity analysis in a databank containing BLASTX-NR plus P. chrysosporium proteins. The genomic regions containing homologues in this databank were selected and exon-intron boundaries were determined. We also selected the alignments between ESTs and genomic clusters. Then, we evaluated if there was a superposition of BLAST alignments and EST alignments. After this analysis, the extrinsic prediction methodology revealed 12,249 gene models. Most of these gene models (9,560) were also predicted by the ab initio gene predictor programs. Of the 2,689 remaining gene models not predicted by the gene predictor programs, 1,789 presented significant similarity to sequences deposited in the GenBank (E-value ≤ 1E-10) and 900 did not have any significant similarity in the GenBank (E-value > 1 E-10) (Fig. 1 and Fig. 2). One of the reasons why these genes were not detected by the gene prediction programs could be the presence of low quality sequences that may have lead to frameshifts, thus making them impossible to detect by these programs. The total number of gene models obtained using both approaches, ab initio and extrinsic predictions, is 16,329. Assuming that the average contig length is 1.3 Kbp and the average gap length is 413 bp, it is possible that this total number of gene models (16,329) represents an overestimation. For instance, in our assembly a gene with > 2 Kbp (protein ~700 aa) could be represented by two gene models, with each one in different contigs, which suggests a possible redundancy in this gene model prediction. Thus, it is very likely that the real number of gene models will be less and closer to the ab initio or extrinsic predictions separately. However, to obtain the maximum amount of information, we decided to evaluate the results of similarity searches in GenBank (BLASTX-NR) for all 16,329 gene models. As a result, 69.5% (11,349) of the gene models showed significant sequence similarity (E-value ≤ 1e-10) to GenBank proteins. The remaining 30.5% (4,980), designated as "no-hits", were sequences with lower E-value scores (E-value > 1e-10). Of these gene models 4,080 were predicted with the ab initio gene predictors and 900 with the extrinsic predictions (Fig. 1 and Fig. 2).

As expected, BLASTX analysis against available complete fungal genomes showed that M. perniciosa gene models present higher similarity to genes from Basidiomycota (L. bicolor, C. cinerea and P. chrysosporium) than those from Ascomycota (Table 2).

In order to find groups of similar proteins in our dataset, we applied a Markov Clustering (MCL) algorithm 43 to the M. perniciosa gene models. Although the output by this method is not highly reliable, they correlate well with "real" gene families and can be applied efficiently to cluster large quantities of genes in a high throughput fashion 4445. MCL also helped to the assemble genes without similarity in the GenBank into gene families, which are described in the following sections.

Those gene models that were not grouped into gene families by the MCL algorithm have been compared with the genome of C. cinerea in order to discard those genes with parts of their sequences present in more than one contig. In order to perform this comparison (TBLASTN) we assume that the length distribution of M. perniciosa proteins is similar to those from C. cinerea. In this comparison we evaluated similar genes according to the length of the protein (Fig. 3). This comparison showed that there is a clear correlation between complete genes in C. cinerea and M. perniciosa gene models coding for proteins smaller than 300 aa. However, for larger proteins more than one M. perniciosa gene model showed similarity to a single C. cinerea protein, thus confirming the overestimation of the number of gene models. Given the fact that the genome sequence is incomplete, there is high probability that we are predicting more than one gene model per gene.

In order to have a measurement of the overestimation and use it to correct our database, the corresponding relationship between the protein size and the number of gene models was calibrated with the genome of C. cinerea using the gene models unlinked to gene families identified by the MCL algorithm (Fig. 3). A linear regression formula was used to correct for the overestimation according to the protein size. For example, proteins smaller than 300 amino acids will have only one model representing the gene, while larger proteins will have one model and a fraction of a second model representing its gene. This fraction represents the overestimation of the number of gene models.

In order to estimate the gene density in M. perniciosa, and deal with the overestimation evident by the previous analysis, we averaged the total number of gene models obtained by the different predictions: ab initio predictions (13,640), extrinsic predictions (12,249) and total number of gene predictions (16,329). This resulted in 14,072 gene predictions that were divided by the 39 Mbp estimated genome size, which gave a gene density of approximately 2.77 ± 0.37 Kbp/gene or 0.36 ± 0.05 gene/Kbp for the genome of M. perniciosa. Figure 4 depicts the gene density comparison between M. perniciosa, two eubacteria (Xyllela fastidiosa and Escherichia coli), one archea (Haloquadratum walsbyi), an apicomplexan (Theileria parva), a primitive chordate (Ciona intestinalis) and a series of fungal genomes, and this showed that our gene density evaluation is in agreement with gene density data of other filamentous fungi 46.

The overall M. perniciosa genomic features are summarized in Table 3. The genomic clusters of M. perniciosa were submitted to NCBI (GenomeProject ID 28951, Locus-tag prefix MPER) and the Whole Genome Shotgun project has been deposited at DDBJ/EMBL/GenBank under the project accession ABRE00000000. The version described in this paper is the first version, ABRE01000000.

The number of gene models used for the functional annotation and building of the metabolic maps was 16,329, which represents the total number of gene models obtained using ab initio and extrinsic predictions. Although this number represents an overestimation of the real number of genes (see above), it was used to maximize the information acquired from these sequences. All data obtained in the gene families and protein domain analyses were corrected according to the normalization procedure developed from the gene models not included in any of the MCL families based on comparisons with the C. cinerea genome (see above).

The program AutoFACT 47, an automated annotation tool, was used to evaluate the putative functions of M. perniciosa gene models. This program determines the most informative functional description by combining multiple BLAST reports from a number of user selected databases, and provides a consensus result 47. AutoFACT classifies proteins as "classified proteins", which can be "assigned" (containing similarity to proteins with annotated function) or "unassigned" (containing similarity to proteins with unknown function), and "unclassified proteins" (without similarity to any other protein in databanks). Using this software, 73% of gene models (11,950) were annotated as previously classified proteins. From these 7,416 (45%) were assigned proteins, and 4,534 (28%) were classified as unassigned proteins, which can be interpreted as a class of conserved hypothetical proteins (Table 3). The remaining 4,379 gene models (27%) were considered as unclassified proteins. The number of gene models with E-value scores > 1e-10 obtained by BLASTX-NR (no-hits, see previous section) was 4,980 and represented 30.5% of the total number of models. The result obtained with AutoFACT increased the number of classified proteins by 3.5% (Fig. 1; Table 3). This indicates that the use of domain classification databases is helpful in the identification and annotation of gene models.

Additionally, we correlated the AutoFACT annotation with the gene families assembled by the MCL algorithm. As depicted in Table 4 and additional file 2, MCL data indicated that the cytochrome P450 monooxygenase family had the largest number of M. perniciosa members, followed by a gypsy-like retrotransposon gene family, and a gene family that has similarity to a C. cinerea hypothetical protein (EAU86912.1) and to a shitake mushroom Lentinula edodes EST (EB016963). This new gene family appears to be related to specific developmental traits of the Agaricales. Also found were new gene families with unknown functions based on their lack of homology with GenBank sequences (Additional file 2; Additional File 3 – Worksheet Unknown Gene Families). These families could possibly be linked to M. perniciosa physiological characteristics.

A comparison of the gene models with the CDD-PFAM databank 48 was performed to obtain information about protein domains present in M. perniciosa proteins. The data obtained were normalized using the procedure described above. Cytochrome P450 monooxygenase was the most prevalent protein domain assigned in M. perniciosa (gnl|CDD|40168), followed by protein kinases (gnl|CDD|40170), sugar transporters (gnl|CDD|40184), short chain dehydrogenases (gnl|CDD|40206) and carboxylesterases/lipases (gnl|CDD|40235) (Table 5; Additional File 4). The prevalence of Cytochrome P450 monooxygenase domains in the genome agrees with the results of MCL analysis. CDD-PFAM analysis was also used to evaluate the protein domains in other genome fungi (Additional File 4). The comparisons between M. perniciosa and the other fungi analyzed are described below.

A hypothetical metabolic map of M. perniciosa was built using BioCyc 49. This analysis allowed us to annotate 235 metabolic pathways. These include 1358 enzymatic reactions incorporating a total of 2139 enzymes http://www.lge.ibi.unicamp.br/biocyc/MP. A comparison of this metabolic map with the fungal model Saccharomyces cerevisiae S288C (documented with 132 pathways, 925 enzymatic reactions, and 675 enzymes – http://www.lge.ibi.unicamp.br/biocyc/comparatives/MP-SCER) showed that M. perniciosa has more metabolic pathways than S. cerevisiae; a result that corresponds to the smaller genome size of S. cerevisiae and possibly the more complex lifestyle of M. perniciosa. Interestingly, M. perniciosa has a higher number of reactions involving O₂, CO₂, H₂O₂, and NAD(P)+/NAD(P)H than S. cerevisiae, suggesting a greater capacity to use and deal with oxidation-reduction reactions (Additional File 5 – worksheet compounds). We also detected reactions with farnesyl pyrophosphate and dimethylallyl-diphosphate, which are involved in the biosynthesis of the secondary metabolites such as isoprenoids and indoles. Moreover, according to BioCyc analysis, M. perniciosa has more amino acid catabolic pathways, alternative carbon sources degradation and biosynthesis routes and C1 compounds (i.e., methanol) utilization and assimilation reactions than S. cerevisiae (Additional File 5 – worksheet pathways). These pathways are under manual annotation and will be published on BioCyc web page. The existence of these pathways in M. perniciosa suggest ecological and physiological adaptations to environmental stresses; to competition present in its native habitat in the Amazon Basin, and to traits that enable it to colonize cacao and trigger WBD.

Based on CDD-PFAM and MCL analyses gene members of the cytochrome P450 monooxygenase superfamily are prevalent in the genome of M. perniciosa (Tables 4 and 5; Additional File 3 – Worksheet P450; Additional File 4). Cytochrome P450 monooxygenases play a role in hydroxylation and oxidation processes involved in biosynthesis and degradation of different compounds 50. Therefore, a large number of gene models similar to cytochrome P450 monooxygenases suggest a significant capacity for synthesis of secondary metabolites, such as hormones or toxins, and for detoxification. Among the fungi analyzed, M. perniciosa has the highest number of cytochrome P450 monooxygenase genes (188 gene models) representing 1.15% of the gene models (Fig. 5A). Saproprotrophic basidiomycetes P. chrysosporium and C. cinerea and the hemibiotrophic ascomycetes Magnaporthe grisea and Fusarium graminearum also have more than one hundred cytochrome P450 monooxygenase genes representing between 1.25% and 0.9% of their gene models (Figure 5A; Additional File 4). The basidiomycete L. bicolor (an ectomycorrhizal fungus) and the ascomycete Neurospora crassa (a fire-scoured landscape colonizer) follow with fewer genes. U. maydis (a biotrophic pathogen), C. neoformans (an animal pathogen) and S. cerevisiae (a fermentative fungus) have the fewest cytochrome P450 monoooxygenase genes of the fungi compared in this study (Fig. 5A; Additional File 4). This analysis clearly demonstrates the prevalence of cytochrome P450 monooxygenases in saprotrophic and hemibiotrophic fungi, which have to hydrolize complex wood polymers and deal with a highly oxidative environment. As discussed by Gonzalez and Nebert 50, cytochrome P450 monooxygenase polymorphisms may be the product of the "molecular warfare" that occurs during the co-evolution of preys and predators, which produce toxins and detoxifying genes, respectively. This logic can be extrapolated to the plant-fungus interaction, and in that sense, we believe that the plethora of cytochrome P450 monooxygenases in M. perniciosa may be critical to detoxification and environmental adaptation as well as for disease development.

Another set of proteins related to detoxification processes are the efflux transporters. Similarity searches in the Transport Classification Database (TCDB – http://www.tcdb.org) 51 which compare the genome of M. perniciosa with other fungal genomes (Additional File 3 – Worksheet Functional annotation and Worksheet Transporters) verified an extended set of efflux transporters from classes 3.A.1 (ABC superfamily) and 3.A.3 (P-type ATPase Superfamily). The majority of ABC transporters identified in M. perniciosa belong to the Pleiotropic Drug Resistance (PDR) family and the ABC Conjugate (ABCC) Transporter family. These proteins have been associated with fungal pathogenesis 52 and heavy metal resistance 53. The members of P-type ATPase superfamily in M. perniciosa include phospholipid translocating ATPases family and fungal ENA-ATPases transporters, which are involved with the efflux of excessive Na⁺, and especially K⁺, encountered by fungi during colonization of plants 54.

During the plant defense, reactive oxygen species (ROS) are produced to limit the pathogen invasion 55. However, pathogenic fungi produce antioxidant enzymes that enable them to neutralize host ROS. M. perniciosa contains a myriad of O₂^- and H₂O₂ decomposing enzymes such as superoxide dismutases, catalases, peroxiredoxins, glutathione-system, thioredoxin-system enzymes and manganese dependent peroxidases (Additional File 3 – Worksheet Functional Annotation). Therefore, this fungal genome harbors a complete ROS detoxification system. Reports indicate that H₂O₂ favors necrotrophic pathogens infection 5657. Furthermore, M. perniciosa produces calcium oxalate crystals (COC) 58, and a cacao susceptible genotype accumulates COC during M. perniciosa infection, followed by a programmed cell death (PCD) 59. The degradation of COC produces carbon dioxide and H₂O₂, suggesting that COCs can be important to necrotrophic mycelia development. In addition, oxalate chelates Ca²⁺, an important secondary plant defense messenger and a key cross-linker of pectin in the middle lamella pectin 60, and was found to be a trigger of PCD in plants 61. These findings suggest that oxalate favors M. perniciosa infection by disorganizing plant defense and plant cell wall structure, by facilitating the action of fungal pectinases and possibly triggering PCD in the later stages of WBD 59.

Seven M. perniciosa gene models were found to be similar to pheromone receptors (Additional File 3 – Worksheet Functional Annotation). As a primary homothallic fungus, M. perniciosa does not use its mating type system to outcross, but probably to promote the formation of clamp connections, hyphae dikaryotization and for the expression of pathogenicity genes as in U. maydis 62. Previous reports have indicated that M. perniciosa exhibits high genetic variability at the molecular level 116364. This level of variability may be the reason M. perniciosa overcomes resistant genotypes of cacao, such as Scavina 6 65. Furthermore, it has been postulated that the genome variability found in homothallic M. perniciosa may be due to transposable elements (TEs) and ectopic recombination guided by the numerous copies of these elements found in the genome 10. The fact that retrotransposons were identified in EST libraries and differentially expressed during M. perniciosa development 20, indicates that they are active elements, which could contribute to genetic variability. Among the M. perniciosa TE families, Gypsy-like retrotransposons were the most abundant, followed by Copia-like retrotransposons (Tables 4 and 5; Additional File 2; Additional File 3 – Worksheet Transposons). TEs similar to P. chrysosporium Copia-like elements were found in M. perniciosa genome inserted within putative cytochrome P450 monooxygenase genes 66. Curiously, they were also inserted in a P. chrysosporium cytochrome P450 monooxygenase subfamily (Additional file 2 – family 255; Additional File 3 – Worksheet P450), suggesting that these TEs may have a common ancestral origin in Basidiomycota. Retroelements of the tyrosine recombinase (YR) order 67 and DNA transposons (class II transposons) from CACTA 68, hATC 6970 and Tc/Mariner 71 superfamilies were also found. Finally, a previously described Boto DNA transposon [M.V. Queiroz et al., unpublished data] from the PIF/IS5 superfamily 72 was also identified in a MCL family (Additional File 2 – family 251; Additional File 3 – Worksheet Transposons).

There is growing evidence of phytohormones being produced by pathogens during some infective processes 73. For instance, the production of gibberellins (GA); hormones involved in the regulation of stem elongation, seed germination, flowering and fruit maturation; have been identified in phytopathogenic bacteria and fungi that cause overgrowth symptoms, such as Giberella fujikuroi and Sphaceloma manhiticola 7475. A search for homologues of the fungal specific bi-functional ent-kaurene synthase (CPS/KS) responsible for the two-step cyclation of GGDP in fungi 76 identified gene models similar to the N-terminal domain of G. fujikuroi CPS/KS but did not detect any sequence similar to the C-terminal domain of this protein in M. perniciosa. Another gene model similar to CPS/KS that lacks the C-terminal domain was found in the Aspergillus niger genome (AM270241.1). Genes similar to GA-4 desaturase and GA oxidases (cytochrome P450), part of a GA biosynthesis gene cluster present in G. fujikuroi and Phaeosphaeria sp. were detected (Additional File 3 – Worksheet Functional Annotation). Reinforcing our data mining discover, is the fact that a gibberellin-like compound was detected in basidiospores of M. perniciosa 77. We can theorize that the production of GA by M. perniciosa may confer the hyperplasic phenotype of the green broom that resembles stem hyper-elongation caused by GA-producing phytopathogens.

Another interesting discovery in the M. perniciosa genome is the presence of genes encoding enzymes of two biosynthetic pathways of indole-3-acetic acid (IAA), the most abundant natural plant auxin. We found a gene similar to plant nitrilases (E.C 3.5.5.1) which catalyzes the direct conversion of indole-3-acetonitrile into ammonia and IAA. Additionally, potential genes for the IAA-producing tryptamine pathway (one tryptophan decarboxylase, copper amine oxidases and a hypothetical indole-acetaldehyde oxidase) were found (Fig. 6; Additional File 3 – Worksheet Functional Annotation). Furthermore, a manual annotation of EST libraries reveal the presence of an aromatic amino acid aminotransferase, which could make part of Indole-3-pyruvate IAA biosynthetic pathway (Fig. 6). IAA regulates many plant biological processes including cell elongation and fruit ripening. Recently, the presence of IAA in M. perniciosa basidiocarps was reported 78. IAA is produced by other fungal phytopathogens such as biotrophics U. maydis and Taphrina deformans and hemibiotrophic Colletotrichum gloeosporioides sp. 798081, and induces filamentation and invasive growth in S. cerevisiae 82. Curiously, both Gibberellin and IAA induce fruit parthenocarpy and act synergistically in plant organ expansion 83, both of which are traits of WBD.

Cacao plantlets inoculated with M. perniciosa spores emit higher levels of ethylene during the late stages of infection than non-inoculated plants 13. The plant hormone ethylene stimulates elongation at low concentrations, and senescence, fruit ripening, and epinasty at high doses 84. Auxins stimulate the synthesis of ethylene 85, which together with gibberellins have integrated actions in plant cell death 86 and stem elongation during phytochrome-mediated shade avoidance, a phenomenon that occurs in response to the low red to far-red light ratios (R:FR) under dense canopies 87. We hypothesize that in a dense and shaded environment, such as a cacao plantation, the low R:FR ratio effects can be increased by the action of the aforementioned phytohormones, explaining the shade avoidance, hypertrophy, and elongation of green brooms. The presence of genes related to plant hormones production in M. perniciosa supports previous data 7778 and suggests that this fungus can influence the plant metabolism and defense, by altering hormonal balance during infection 7388.

As a pathogen that colonizes the plant apoplast during its biotrophic stage, M. perniciosa may release elicitor or effector proteins into the extracellular medium, which in turn could evade or suppress the plant defense response. Throughout WBD, M. perniciosa produces proteins with the potential to kill plant cells, thereby releasing their contents, which are absorbed by the fungus during its saprotrophic stage. Thus, M. perniciosa uses a varied arsenal of effector proteins in order to complete its infection cycle. Although some phytopathogenic fungi deliver effector proteins into the cytoplasm by means of haustoria 8990 this type of structure is absent in M. perniciosa. Therefore it is possible that this fungus secretes these proteins into the apoplast, as has been described for other fungi 91. Effector proteins that are recognized by plant resistance (R) proteins are known as avr proteins. No orthologues to the known Ascomycota avr genes, not even the U. maydis genes contained in "biotrophic clusters" 92, were found in the genome of M. perniciosa. However, ab initio gene prediction with peptide signal analysis revealed 70 "no hits" small proteins containing secretion signals and at least two cysteines (see methods, Additional File 6), which is a common trait of many proteins that are delivered into the host apoplast by phytopathogens 93. In order to validate 22 selected ab initio predictions, we conducted RT-PCR using RNA from M. perniciosa saprotrophic mycelia. We validated the expression of 13 gene models out of 22 tested, all of which contained secretion signals (Additional File 7 – Primers No Hits Cys protein). Possibly, the gene models that were not confirmed by RT-PCR are expressed in other developmental stages of the fungus (basidiome, spore, etc.). Additional File 8 depicts the amplification of three of these genes. Whether these proteins play a role in the pathogenicity of M. perniciosa or in elicitation of cacao defense remains to be elucidated.

M. perniciosa contains Necrosis and Ethylene inducing proteins (NEPs) and cerato platanins 1994, which can act in conjunction with a series of proteinases, hemolysin-like proteins and carboxylesterases/lipases found in the genome (Additional File 3 – Worksheet Functional Annotation). These proteins appear to be part of the destructive arsenal of M. perniciosa. The most abundant proteinases in the genome of M. perniciosa are deuterolysins, a type of fungal metalloproteinases that are similar to bacterial thermolysin 95. Compared to other fungi indicates that M. perniciosa has a deuterolysin expansion (13 gene models; Fig. 5A; Additional File 4), suggesting an important role for these proteinases during this fungus development.

We also identified a gene family similar to agaricales Pleurotus ostreatus and Agrocybe aegerita hemolysin-like aegerolysins. These proteins have cytolitic properties 96 and seems to play an important role at the initial phase of fungal fruiting by making the fungal membranes permeable during cell signaling 96. M. perniciosa genome contain a family of aegerolysins (6 aegerolysins; Fig. 5A; Additional File 4). None of the other agaricales fungi analyzed (L. bicolor, C. cinerea and P. chrysosporium) contain these proteins. Even though we could not assess the genomic data of the basidiomycete containing aegerolysins, we suggest that the diversification of these proteins in WBD causative agent indicates their importance in M. perniciosa development or even in fungi defense and infective process.

Carboxyesterases and lipases are overrepresented in M. perniciosa (Tables 4 and 5; Additional Files 2 and 4). According to CDD-PFAM, M. perniciosa have 38 gene models annotated as carboxylesterases, approximately twice the number of such proteins in other basidiomycete (ectomycorrhizal L. bicolor (15); saprobes C. cinerea (19) and P. crhysosporium (14); and biotrophic U. maydis (12); Figure 5A; Additional File 3); while the hemibiotrophic ascomycete F. graminearum and M. grisea have 40 and 29 carboxylesterases, respectively. We postulate that the great number of carboxylesterases and lipases in M. perniciosa, F. graminearum and M. grisea is related to their hemibiotrophic lifestyle. In fact, these enzymes are induced during carbon and nitrogen starvation 97, and cell wall degradation 98, two events that occur during hemibiotrophism.

Other genes associated with the plant-pathogen interaction found in our analysis were similar to the SCP-like superfamily proteins, which comprise pathogenesis related (PR) proteins of family 1 (PR-1). Additionally, gene models similar to PR-5/thaumatin superfamily were also detected in the M. perniciosa genome (Additional File 3 – Worksheet Functional Annotation). PR proteins are well described as associated with defense reactions in plants against various pathogens 99. For instance, transgenic plants overexpressing PR-1 proteins were more resistant to oomycete infection 100 and some Thaumatin-like proteins (TLPs) have β-glucanase activity, inhibit xylanase and have antifungal properties 101102103. Recently, proteins similar to PR-1 and thaumatin have been characterized in animals and fungi 104105, indicating a conserved and important role in diverse organisms. Based on CDD-PFAM analysis, M. perniciosa contains the largest number of thaumatins of any fungus sequenced, so far (7 thaumatins, Fig. 5A; Additional File 4).

Both PR-1 and PR-5 are induced by salicylic acid (SA) in plants 99. Curiously, the M. perniciosa necrotrophic (saprotrophic) mycelia were found to produce and have tolerance to SA in axenic cultures 70. Plants with WBD have a higher content of SA when compared with healthy plants 106. M. perniciosa tolerance to SA could be explained by the expression of genes encoding salicylate hydroxylases, which were also detected in the genome (Additional File 3 – Worksheet Functional Annotation). In this scenario, high levels of SA could block the synthesis of jasmonic acid (JA), a defense compound against necrotrophic pathogens that acts as a necrosis inducer, thus rendering the plant susceptible to the spread of M. perniciosa 78106. In addition, it is possible that SA and SA-induced proteins (i.e., PR-1, PR-5) may act to limit competition from other microbial competitors during WBD progression, which would be an important component of the M. perniciosa pathogenicity strategy.

Degradation of hemicellulose, cellulose, pectin and depolymerization of lignin are some of the mechanisms that necrotrophic fungi use to colonize plant tissues 107. We identified genes encoding enzymes involved in degradation of hemicellulose and cellulose, including β-1,4 cellulases, exocellobiohydrolases, endo-beta-1,4-xylanases and endoglucanases; genes encoding lignolytic enzymes including manganese dependent peroxidase and multicopper polyphenoloxidases (laccases); and genes encoding enzymes involved in pectin degradation, such as pectate lyases, polygalacturonases (pectinases) and pectin methylesterases (pectinesterase) (Additional File 3 – Worksheet Functional Annotation). M. perniciosa have an arsenal of plant cell wall degrading enzymes that is similar to that found in the hemibiotrophic pathogens F. graminearum and M. grisea (Fig. 5B; Additional File 9). Biotrophic U. maydis and symbiont L. bicolor have a minimal set of PCWDEs what is in accordance with their lifestyle (Fig. 5B; Additional File 9).

Pectate lyases (PL1 and PL3 according to CAZy nomenclature – http://www.cazy.org) cleave pectin, an essential component of plant cell walls. Among the fungi analyzed, F. graminearum and M. perniciosa contain the largest number of PLs (Fig. 5B; Additional File 9). Unlike M. grisea, the other hemibiotrophic analyzed, F. graminearum and M. perniciosa does not have specialized structures (appressoria) for non-enzymatic penetration of plants, and colonizing the apoplast by breaching the middle lamella barrier (Fig. 7). In addition, both are able to infect dicotyledons that contain cell walls with larger amounts of pectin than monocots 108. This analysis suggests that PLs have an important role for pathogens that colonize the apoplast of dicotyledons.

Pathogen energy status and the acquisition of host metabolic compounds by the pathogen are factors that determine the outcome of disease onset. Therefore, enzymes of M. perniciosa involved in intermediary metabolism (i.e., reactions concerned with storing and generating metabolic energy) may have an important role during WBD (Additional File 3 – Worksheet Functional Annotation). During the first stages of WBD, M. perniciosa may encounter a nutrient-poor and extreme oxidative environment containing host defense molecules, such as nitric oxide (NO), an inhibitor of the cytochrome respiratory pathway 109. Under these conditions, the activity of a NO tolerant alternative oxidase (AOX) may constitute a critical bypass mechanism for the cytochrome pathway 110111112. A single copy of AOX was detected in M. perniciosa, and preliminary experiments indicate that this gene has a higher expression in fungi grown in nutrient-poor media (data not shown).

Following this scenario, in the low-energy status represented by the biotrophic phase, AOX may provide NAD⁺ for the turnover of the mitochondrial tricarboxylic acid cycle (TCA) and the peroxisomal glyoxylate cycle (GLOX). Many reports have documented the importance of GLOX for phytopathogens during host infection 113114115. All genes coding for proteins of this enzymatic pathway are present in the genomeof M. perniciosa, including the key enzymes isocitrate lyase and malate synthase (Additional File 3 – Worksheet Functional Annotation).

Curiously, M. perniciosa is able to use methanol as the only carbon source (data not shown), indicating that this fungus may have a methylotrophic metabolism. Methylotrophism have been extensively studied in methylotrophic yeasts such as Pichia angusta and recently methanol oxidases (MOX) have been described in filamentous fungi such as C. fulvum 116 and wood-degrading basidiomycete Gloephyllum trabeum 117. A gene encoding a MOX was identified in M. perniciosa genome (Additional File 3 – Worksheet Functional Annotation). Interestingly, this gene was previously detected as being overexpressed in biotrophic-mycelia 20. The methanol catabolism enzymes formaldehyde dehydrogenase and formate dehydrogenase (Additional File 3 – Worksheet Functional Annotation) were also found in the genome, which provides evidence that M. perniciosa indeed hydrolyzes methanol. Methanol is, possibly, derived from the first step of pectin hydrolyzation performed by the cell wall degrading enzyme pectin methylesterase 118, or from demethylation of lignin that occurs after manganese peroxidase and/or laccase action 117. We can not discount the possibility that the biotrophic fungi can use the methanol produced by pectin metabolism during normal cell wall synthesis in early stages of plant expansion 119. The possibility that M. perniciosa is methylotrophic resembles the methylobacteria nutritional strategy, which provides an ecological advantage over non-methylotrophic microorganisms present in the phyllosphere 120.

Previous data indicated that the utilization of glycerol, instead of fermentable sugars (i.e., glucose), is an important environmental clue for the maintenance of the biotrophic stage 18121. Accordingly, our group detected higher amounts of glycerol during the biotrophic fungal phase of the green brooms development than in dry brooms 13. Additionally, in vitro assays showed that the shift from glucose to glycerol media increased anti-oxidative defenses of M. perniciosa mycelia 122. This result correlates well with green broom environment (high content of glycerol and ROS) raising the possibility that glycerol is a critical metabolite during the initial stages of the disease cycle. Genes involved in glycerol metabolism and uptake are present in M. perniciosa, including a biotrophic induced aquaglyceroporin transporter 20 (Additional File 3 – Worksheet Functional Annotation), suggesting that this fungus is able to acquire extracellular glycerol.

After 35 days of WBD, glucose levels increase again, concomitant with a reduction in starch levels 13. We found a gene model similar to a secreted glucoamylase in the M. perniciosa genome (Additional File 3 – Worksheet Functional Annotation). Gibberellin is an inducer of α-amylase production 123. We can envisage a disease scenario in which the fungus produces an extracellular amylase and hormones (i.e., gibberellin) that triggers plant amylolytic activity, which then decrease starch content. The resulting glucose can be utilized by the plant since at this stage the green brooms/infected tissues are rapidly growing or even be acquired by the pathogen at the transition phase between biotrophic and necrotrophic stages.

Nitrogen starvation also appears to be a factor that influences the biotrophic lifestyle 124 and is associated with the expression of pathogenicity genes and PCWDE, mainly in hemibiotrophic and biotrophic fungi that deal with nutrient deprivation during early infection 125. Our data from microarray and EST analysis suggests that nitrogen catabolite repression (NCR) occurs in M. perniciosa by the induction of GABA permease, tRNA synthetates and AROM protein 20. As reported previously 20M. perniciosa contains a gene homologous to CLNR1 from the hemibiotrophic fungus C. lindemuthianum (Additional File 3 – Worksheet Functional Annotation), a global nitrogen regulator that belongs to the AREA/NIT2 family. CLNR1 activates enzymes and transporters that enable uptake and catabolism of secondary nitrogen sources 126. The depletion of CLNR1 impaired the fungal switch to necrotrophy 124, emphasizing the importance of nitrogen catabolism in hemibiotrophic development. Our genomic data mining identified a gene similar to NPR2, which encodes a regulatory protein that may act upstream of the AREA/NIT2 protein (Additional File 3 – Worksheet Functional Annotation). NPR2 is required for the expression of the M. grisea pathogenicity gene MPG1 127. In addition, genes that encode enzymes involved in alternative nitrogen sources uptake (i.e., GABA transporter, urea permease and nitrate transporter) and metabolism (i.e., urease, nitrate reductase, nitrite reductase, arginase and uricase) were identified (Additional File 3 – Worksheet Functional Annotation). The presence of such genes in M. perniciosa genome indicates that this fungus could allocate and utilize alternative nitrogen sources in the absence of preferential nitrogen sources (glutamine and ammonia) reinforcing our hypothesis that M. perniciosa suffers NCR during early stages of WBD.

Total DNA was extracted from saprotrophic hyphae of M. perniciosa strain FA553 (CP02) maintained in Malt Yeast Extract Agar (Difco) at 27°C. DNA was extracted from grounded mycelia by incubation in CTAB buffer (CTAB 3%, NaCl 1.4 M, EDTA 20 mM pH 8.0, Tris-HCl 10 mM pH 8.0, PVP 1.0%, β-mercaptoethanol 0.2%) at 65°C during 30 min; followed by one phenol:chloroform:isoamyl alcohol (25/24/1) wash, precipitation with sodium acetate pH 5.2 (0.1 Vol) and cold 100% ethanol (2 Vol). DNA was eluted in deionized water and sheared by nebulization and sonication into fragments of approximately 2 Kbp, which were size selected on agarose gels and purified with S.N.A.P. Gel Purification Kit (Invitrogen – Life technologies, USA). DNA fragments were blunt-end ligated into the pCR4Blunt plasmid (Invitrogen – Life technologies, USA). Approximately 50 genomic libraries were constructed, each one corresponding to individually growing cultures. Sequencing was done in an ABI Prism 3700 sequencer (Applied Biosystems, USA).

The resulting chromatograms were submitted to the M. perniciosa database and subjected to automatic base calling using the software PHRED 128. The contaminating vector sequences and low quality shotgun reads, without at least 100 bp with phred note ≥ 16 were trimmed by using the program LUCY 129. Shotgun reads showing significant sequence similarity (BLASTn, E-value ≥ 1E-30) with M. perniciosa mitochondrial sequences (see above) were removed from subsequent assemblies. The clustering and assembly were performed using the software PHRAP http://www.phrap.org. Afterwards, low quality regions of singlets previously evaluated by LUCY (the last window of 10 bp that has an average probability of error given by phred ≤ 10) were trimmed. The remaining clusters were subjected to similarity searches against the NCBI non-redundant protein and nucleotide database using the BLASTx and tBLASTx, respectively, with an E-value cutoff of 1E-5.

Statistical analyses of the genome length were performed using two approaches. The first one was based on the Dog genome survey using counting of start positions offsets for overlapping reads 31 (for further details see Additional File 1). The second was based on Lander Waterman Theory, 34 and their applications 3536, which estimate the theoretical values of expected number of clusters (contigs + singlets), contigs, gaps, average cluster size and average gap size, using the effective average read length (L), the total number of reads in the assembly (N) and the estimated genome size (G). L is the average number of base pairs of a read that contributes to the contig through parsing of ace file http://www.phrap.org. In our analysis L was equal to 550 bp. In order to estimate the gap size distribution in the M. perniciosa genome survey, we performed a comparison between a set of eukaryotic core protein (generated by CEGMA pipeline 37) and M. perniciosa contigs using TBLASTN with threshold of 1e-10 for the E-value (Further details in Additional File 1). The estimation of misassembled sequences due to repetitive regions in the genome was performed using the integrated pipeline amosvalidate 38 (Further details in Additional File 1).

The automatic annotation program AutoFACT 47 was used for functional annotation of gene models. The set of coding sequences from gene models were submitted to similarity searches against the UNIREF100, UNIREF90, NR, and KEGG databases using BLASTx (E-value ≤ 1E-5) and against CDD-PFAM using RPS-BLAST (E-value ≤ 1E-5) 48. These results were submitted to AutoFACT, which searches for a consensus in the results and output descriptions and statistics about protein domains and families.

For an inference of M. perniciosa metabolic maps, we used Pathway Tools (version 11.0), a software of BioCyc databases 49, which generates a metabolic map from a previously annotated genome. The pathways that are probably present in the genome are imported from a reference database, following the Pathway Tools parameters 133. The annotated genome input was obtained from EST manual annotation and from M. perniciosa gene models AutoFACT annotation, using as main information the product name and, if available, E.C. numbers. Metabolic pathways of interest were manually annotated for the elimination of false positives.

The analysis of transporters was made based on a BLASTX search of M. perniciosa gene models and other fungal genes against TCDB (Transport Classification Database – http://www.tcdb.org), using a threshold of E-value 1E-05. All classes from third level that contained at least one species with 2% or more of representations were separately represented in the results.

The selection of ab initio gene models was performed using a SQL query wizard. As input, we ask for gene models without similarity in GenBank NR, which encoded proteins that contained at least 2 cysteines and a signal peptide, previously identified by Signal-P 3.0 program 134. 74 gene models were then selected and their nucleotide sequences were used as template for the design of primers nested in: (i) the sequence encoding the putative signal peptide (SPE); (ii) the sequence encoding the putative first amino acid of mature protein (MAT) and; (iii) the sequence containing the putative stop codon (END). The latter was designed in reverse complement ("reverse") to allow gene amplification using the other two primers ("forward"). RT-PCR analysis was performed to validate the expression of ab initio predicted gene models. RNA from saprotrophic mycelia was extracted using hot-phenol method with modifications 135. Equal amounts of total RNA from CP02 saprotrophic mycelia cultures (24 h, 48 h, 4 days and 7 days) were mixed. After DNase (Invitrogen, USA) treatment, 2 μg of total RNA was reverse transcribed using Superscript RTII (Invitrogen, USA) in a total volume of 20 μL, following the manufacturer's instructions. PCR reactions were conducted according to primers (MWG, Imprint Genetics Corp) temperature of melting (TMs).