Email updates

Keep up to date with the latest news and content from BMC Biophysics and BioMed Central.

Open Access Methodology article

Detection and differentiation of bacterial spores in a mineral matrix by Fourier transform infrared spectroscopy (FTIR) and chemometrical data treatment

Andrea Brandes Ammann and Helmut Brandl*

Author Affiliations

University of Zurich, Institute of Evolutionary Biology and Environmental Studies, Winterthurerstrasse 190, CH-8057 Zurich, Switzerland

For all author emails, please log on.

BMC Biophysics 2011, 4:14  doi:10.1186/2046-1682-4-14


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/2046-1682/4/14


Received:5 April 2011
Accepted:14 July 2011
Published:14 July 2011

© 2011 Ammann and Brand; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Fourier transform infrared spectroscopy (FTIR) has been used as analytical tool in chemistry for many years. In addition, FTIR can also be applied as a rapid and non-invasive method to detect and identify microorganisms. The specific and fingerprint-like spectra allow - under optimal conditions - discrimination down to the species level. The aim of this study was to develop a fast and reproducible non-molecular method to differentiate pure samples of Bacillus spores originating from different species as well as to identify spores in a simple matrix, such as the clay mineral, bentonite.

Results

We investigated spores from pure cultures of seven different Bacillus species by FTIR in reflection or transmission mode followed by chemometrical data treatment. All species investigated (B. atrophaeus, B. brevis, B. circulans, B. lentus, B. megaterium, B. subtilis, B. thuringiensis) are typical aerobic soil-borne spore formers. Additionally, a solid matrix (bentonite) and mixtures of benonite with spores of B. megaterium at various wt/wt ratios were included in the study. Both hierarchical cluster analysis and principal component analysis of the spectra along with multidimensional scaling allowed the discrimination of different species and spore-matrix-mixtures.

Conclusions

Our results show that FTIR spectroscopy is a fast method for species-level discrimination of Bacillus spores. Spores were still detectable in the presence of the clay mineral bentonite. Even a tenfold excess of bentonite (corresponding to 2.1 × 1010 colony forming units per gram of mineral matrix) still resulted in an unambiguous identification of B. megaterium spores.

Keywords:
Bacillus spores; infrared spectroscopy; FTIR; clay minerals; bentonite; mineral matrix

Background

Infrared spectroscopy of a chemical compound or material is based on the absorption of radiation energy in the infrared range (near infrared, NIR, 780 nm to 2.5 μm, 12821 to 4000 cm-1; mid infrared, MIR, 2.5 to 25 μm, 4000 to 400 cm-1; far infrared FIR, 25 μm to 1 mm, 400 to 10 cm-1). Absorption peaks correspond to vibrations or rotations of the chemical bonds (e.g., C-H, N-H, or C-O) between the atoms making up the material. Because each different material is a unique combination of atoms, no two compounds produce exactly the same infrared spectrum resulting in a characteristic infrared "fingerprint". Consequently, infrared spectroscopy can result in a positive identification of basically every different kind of material. Although infrared spectroscopy has been routinely used as analytical tool in chemistry for many years, this technique has only recently been applied in environmental microbiology or microbial ecology.

In 1911, W.W. Coblentz (cited by [1]) was the first to analyze complex biological samples such as gelatine or chitin as well as minerals (e.g., quartz, opal, and muscovite) by infrared spectroscopy. The first infrared spectroscopy analyses in biological experiments were conducted in the early fifties. Most of them were on a more general level (e.g., [2-5]) and only a few were applied in medical diagnostics or in food production [6-8]. At that time, the instruments and possibilities for subsequent data processing were much more limited than today. In the eighties, Naumann and coworkers [9] developed efficient methods and instruments for microbiological use in a joint project between the Robert Koch Institute and a manufacturer of FTIR spectrometers (Bruker, Germany).

Fourier transform infrared (FTIR) spectroscopy in the MIR range can be applied as a rapid and non-invasive physico-chemical method to detect and identify microorganisms [9]. More recently, methods - particularly statistical data treatments - have been further developed to get faster and better results. Whole living cells can be analyzed non-destructively, which allows in vivo investigations. As example, diffusive reflectance infrared spectroscopy (DRIFT) was used to discriminate among 36 strains of vegetative Bacillus cells and their spores [10]. More recently, different serovars of Salmonella enterica have been discriminated by mid-FTIR in attenuated total reflection (ATR) mode applying soft independent modeling of class analogy (SIMCA modelling) [11]. Discrimination of endospores by mid-FTIR in ATR mode followed by the application of principal component analysis (PCA), hierarchical cluster analysis (HCA), and SIMCA remained possible even after autoclaving of the samples [12]. Libraries have been developed to relate spectral absorbance peaks of key functional groups present in proteins, carbohydrates, lipids, or nucleic acids [13]. Spectra of biological samples can be divided in different regions or windows. The typical fingerprint region for microorganisms is between wavenumbers of 650 cm-1 and 1800 cm-1 originating from cellular carbohydrate compounds and proteins. Cellular fatty acids and lipids show peaks between 2800 and 3000 cm-1. Best classifications are obtained using spectral differences in the amide I and II regions of 1500 to 1650 cm-1 [14]. Basic principles and applications in biology are described in detail by Naumann [15]. A short summary of publications concerning the discrimination, classification, and identification of microorganisms as whole cells is given by [16]. Our aims were (i) to discriminate spores of different soil-borne bacilli; and (ii) to detect bacterial spores in the presence of a clay mineral matrix serving as a simple surrogate for soil. Most research has been done so far on pure bacterial cultures in the absence of matrices, for example in studies related to medicine, diagnostics, or food production [17].

Results and Discussion

FTIR is a rapid and easy method to differentiate microorganisms down to the molecular level without the need of a complex and often time-consuming sample preparation. For measurement in the ATR mode (reflection), solid samples can be placed directly on the crystal prism of the ATR accessory. Transmission mode requires suspension for solids and always a drying step before the measurement. Most of the studies done so far used the transmission method. Nevertheless, Baldauf and coworkers found ATR to give better resolution of peaks while using less biomass compared to other FTIR methods [18].

Bacillus species used in this study (such as B. atrophaeus, B. brevis, B. circulans, B. lentus, B. megaterium, B. subtilis, and B. thuringiensis) are typical representatives of aerobic soil-borne spore formers and have been isolated from various soil environments. As an example, B. subtilis is a typical member of spore forming bacilli. In some cases, B. megaterium might occur in soil at high densities [19-21]. Usually, a discrimination of Bacillus spores by classical (e.g., microscopical) methods is rather difficult and tedious [22]. Discrimination of vegetative cells and spores of Bacillus circulans was possible using FTIR and subsequent chemometrical analysis of the spectra (Figure 1). In particular, original spectra and second derivatives thereof showed distinct inter-specific differences between 1000 and 1500 cm-1. Differential spectra of second derivatives showed the most significant differences in spectral ranges of 1025 to 1032, 1374 to 1376, 1440 to1455, 1616 to 1619, and 1633 to 1644 cm-1. Most important, even spores of different Bacillus species can be distinguished by chemometrical data treatment using PCA (Figure 2). By FTIR spectroscopy, spores of Bacillus thuringiensis, B. subtilis, and B. megaterium were easily distinguished. Our data are in good agreement with results of other investigations [23]. In some cases, however, IR fingerprints obtained by chemometrical analysis of spores of B. atrophaeus, B. brevis, B. circulans, and B. lentus clustered close together making a discrimination difficult (Figure 2).

thumbnailFigure 1. FTIR spectra of vegetative cells of Bacillus circulans (solid line) and its spores (dashed line), measured in ATR mode (ZnSe prism). a) normalized spectra; b) second derivative of spectral range 1000 to 1500 cm-1.

thumbnailFigure 2. Differentiation by principal component analysis of spores formed by seven Bacillus species measured in FTIR-ATR mode. a: B. atrophaeus; b: B. brevis; c: B. circulans; m: B. megaterium; l: B. lentus; s: B. subtilis; t: B. thuringiensis. Measurements were performed in triplicates.

When we used hierarchical cluster analysis (HCA) instead of PCA for the discrimination of spores, similar results were obtained and differentiation was possible (Figure 3). However, slight differences were observed between the statistical treatments, probably due to the different FTIR mode applied, namely transmission instead of ATR. Remarkably, the reclassification of Bacillus brevis as Brevibacillus brevis based on molecular markers [24] is reflected in early branching of the hierarchical clustering tree. Moreover, the distance trees resulting from hierarchical cluster analysis based on FTIR investigations of pure cultures were in agreement to phylogenetic trees derived from classical molecular methods based on 16S rRNA gene sequences (see e.g., [25]) and supports findings of other studies [26,27].

thumbnailFigure 3. Differentiation of spores from seven Bacillus species measured in FTIR-transmission mode on PE film by hierarchical cluster analysis. Measurements were performed in replicates indicated by numbers.

To test our ability to discriminate spores in the presence of a matrix, the ATR mode was applied to study mixtures of pure spores and a clay mineral (bentonite). Bacillus spores (as well as vegetative cells) usually adhere strongly to different solid surfaces including clay minerals such as kaolinite or bentonite [28,29]. The latter might be used as simple matrix and a surrogate for soil. Generally, silicate minerals (such as e.g., bentonite) strongly absorb IR radiation, in particular in the 950 to 1100 cm-1 region due to Si-O bond stretching, resulting in a typical IR spectrum [30,31]. This strong background absorption makes the determination of second phases in the matrix (e.g., bacterial spores) rather difficult. Differential spectra of second derivatives showed most prominent differences in the spectral range of 1652 to 1655 cm-1, attributable to amide I vibrational bands of proteins [13]. Our investigations show that it is possible to differentiate spore-bentonite mixtures at different mixing ratios by using multiscaling principal component analysis of second derivatives of FTIR spectra (Figure 4). In particular, bentonite samples with a high spore content (1:1 wt/wt) were easily discriminated from others. Even an approximately tenfold excess of bentonite (1:8 wt/wt ratio) still resulted in a differentiation from pure bentonite indicating the presence of Bacillus spores. In terms of colony forming units (cfu), a 1:8 spores/bentonite ratio (wt/wt) corresponded to 2.1 × 1010 cfu per gram. In an earlier investigation, we investigated the occurrence of bacterial endospores in soils from various locations including grasslands (pasture, meadow), allotment gardens, and forests, as well as fluvial sediments, using a method based on the fluorescence of terbium [32]. Spore counts in the range of up to 109 spores per gram of dry soil were found in grassland soils. Foster et al. [33] performed similar FTIR experiments including clay minerals with different Bacillus species (vegetative cells and spores) and obtained comparable results.

thumbnailFigure 4. Multiscaling principal component analysis (PCA) of spores of Bacillus megaterium in the presence of the clay mineral bentonite at different spore/bentonite (wt/wt) ratios. "B mega": Bacillus megaterium without bentonite; "bentonite": pure bentonite without spores. Second derivatives of original spectra were truncated (750 - 1800 cm-1) and used for PCA. Five independent replicates per sample were measured. Drop lines are given for the PC1/PC2 plane.

Conclusions

Our study shows that spores originating from different Bacillus species can be discriminated by applying FTIR and subsequent multiscaling chemometrical data treatment. Additionally - and more important - spores were still detectable in the presence of clay mineral matrix such bentonite which was used as a simple surrogate of soil. An important advantage of FTIR is the small amount of sample to be used. Only a few milligrams are needed to perform a measurement. In principle, data processing and identification of spores or vegetative cells can be automated. There are fully automated devices available in other fields to identify chemical substances, especially when rapid identification of hazardous materials is required (e.g., [34]).

Methods

Bacillus spores

Bacillus type strains were purchased from German Collection of Microorganisms and Cell Cultures (DSMZ): Bacillus atrophaeus DSMZ 7264, Bacillus brevis DSMZ 30 (reclassified as Brevibacillus brevis [24]), Bacillus circulans DSMZ 11, Bacillus lentus DSMZ 9, Bacillus thuringiensis DSMZ 2046. Bacillus subtilis (clone BD 170) was obtained from bio-protect (Gesellschaft für biologischen Pflanzenschutz, Konstanz, Germany). Bacillus megaterium was from our own culture collection. All type strains belong to the RNA group 1, except Brevibacillus brevis, which belongs to RNA group 4. All bacilli were cultured in liquid Medium 1 suggested by DSMZ consisting of (in g/l) peptone (5.0) and meat extract (3.0), with a prolonged incubation of 10 to 15 days at 150 rpm and 30°C to deplete the medium. To initiate and force sporulation, cultures were centrifuged under sterile conditions and the pellets were transferred to a sporulation medium with the following composition (in g/l): NH4Cl (1.6); yeast extract (1.0); K2HPO4 (0.9); KH2PO4 (0.6); MgSO4 • 7H2O (0.2); CaCl2 • 2H2O (0.07); FeSO4 • 7H2O (0.01); EDTA (0.01); trace element solution (1 ml/l) containing MnSO4 • H2O (0.02); (NH4)6Mo7O24 • 4H2O (0.02); H3BO4 (0.01); CuSO4 • 5H2O (0.01); ZnSO4 • 7H2O (0.01). After an additional incubation period of approximatively 30 days, cultures were checked microscopically and spores were harvested by centrifugation, washed three times with distilled water to remove media compounds and subsequently freeze dried. Bentonite was ground to a fine powder using a ball mill. Spores of B. megaterium were mixed with powdered bentonite in different wt/wt ratios (1:1; 1:2; 1:4; 1:6: 1:8) and immediately measured by FTIR without any further treatment. To convert wt/wt ratios to colony forming units (cfu) per gram of mineral matrix, a 3.1 mg aliquot of the 1:8 mixture was suspended in 10 mg of sterile tap water, sonicated for 1 min, and boiled for 5 min to kill vegetative cells of contaminating microorganisms. The suspension was serially diluted and and 20 μl aliquots were plated in triplicates onto a growth medium (HiCrome' Bacillus Agar, Sigma-Aldrich, Buchs, Switzerland) highly selective for Bacillus species [35]. Plates were incubated at 30°C for 48 h and colonies counted by visual inspection.

Fourier transform infrared spectroscopy

A JASCO 4200-FTIR (Brechbühler AG, Schlieren, Switzerland) was used for the measurements in attenuated total reflection (ATR) mode using an ATR accessory equipped with a zinc selenide (ZnSe) prism. A small amount (approximately 2 to 5 mg) of sample - enough to cover the prism - was placed onto the ATR accessory and spectra were collected. Fifty scans with a resolution of 4 cm-1 using the ZnSe prism were averaged and used for further chemometrical analyses. For measurements in the transmission mode, samples were suspended in ultra pure water (18.2 Ω) and 100 μl were pipetted onto a thin polyethylene (PE) film held in place by in a slide mount and air dried. Spectra were collected with the same settings as with the ZnSe prism. Pure PE film was taken as background. Measurement range was 650 to 4000 cm-1 for ATR and 400 to 4000 cm-1 for transmission mode. Each sample was measured in three to five independent replicates.

Chemometrical data processing

Raw spectral data were processed with JASCO Spectra Manager 2.02.02. First, all spectra were treated as follows: (i) baseline correction (linear); (ii) ATR-correction (for reflection mode only); (iii) smoothing (Savitzky-Golay, width = 15); (iv) truncate (1800 - 650 cm-1 for ATR mode, none for transmission mode); (v) normalization (hightest value = 1, lowest value = 0). Subsequently, the second derivative was calculated (Savitzky-Golay, width = 5 for ATR mode, 15 for transmission mode). Second derivatives of corrected spectra were compared applying hierarchical cluster analysis, HCA, applying Ward's minimum variance method and squared Euclidian distance, as well as principal components analysis, PCA. Statistical analyses were performed with either the open source software package R or SPSS 12.0.1.

Authors' contributions

Main experimental work was carried out by ABA as part of her PhD thesis under the supervision of HB. HB was the principal investigator and contributed also experimental work and statistical analyses. Both ABA and HB wrote the manuscript. Both authors read and approved the final manuscript.

Acknowledgements

The work was supported by the Biosafety Office of the Canton of Zurich (Zurich, Switzerland). We thank Beat Köhler (Brechbühler AG, Schlieren, Switzerland) for his help and advice regarding the implementation of infrared spectroscopy in our lab. The help of Dr. Timothy Paine during the revision of the manuscript is highly appreciated.

References

  1. Burgula Y, Khali D, Kim S, Krishnan SS, Cousin MA, Gore JP, Reuhs BL, Mauer LJ: Review of mid-infrared Fourier transform-infrared spectroscopy applications for bacterial detection.

    J Rapid Methods Autom Microbiol 2007, 15:146-175. Publisher Full Text OpenURL

  2. Stevenson HJR, Bolduan OEA: Infrared spectrophotometry as a means for identification of bacteria.

    Science 1952, 116:111-113. PubMed Abstract | Publisher Full Text OpenURL

  3. Levine S, Stevenson HJR, Chambers LA, Kenner BA: Infrared spectrophotometry of enteric bacteria.

    J Bacteriol 1953, 65:10-15. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  4. Thomas LC, Greenstreet JES: The identification of micro-organisms by infrared spectrophotometry.

    Spectrochim Acta 1954, 6:302-319. Publisher Full Text OpenURL

  5. Norris KP, Greenstreet JES: On the infrared absorption spectrum of Bacillus megaterium.

    J Gen Microbiol 1958, 19:566-580. PubMed Abstract OpenURL

  6. Levine S, Stevenson HJR, Bordner RH, Edwards PR: Typing of Klebsiella by infrared spectrophotometry.

    J Infect Dis 1955, 96:193-198. PubMed Abstract | Publisher Full Text OpenURL

  7. Kull FC, Grimm MR: Infrared absorption spectra of Bacillus megaterium phages and host cell.

    Virology 1956, 2:131-138. PubMed Abstract | Publisher Full Text OpenURL

  8. Bartlet JC: Identification of edible oils and the detection of oil adulteration by differential infra-red spectroscopy.

    Nature 1957, 180:1071-107. PubMed Abstract | Publisher Full Text OpenURL

  9. Naumann D, Helm D, Labischinski H: Microbiological characterizations by FT-IR spectroscopy.

    Nature 1991, 351:81-82. PubMed Abstract | Publisher Full Text OpenURL

  10. Goodacre R, Shann B, Gilbert RJ, Timmins EM, McGovern AC, Alsberg BK, Kell DB, Logan NA: Detection of the dipicolinic acid biomarker in Bacillus spores using Curie-point pyrolysis mass spectrometry and Fourier transform infrared spectroscopy.

    Anal Chem 2000, 72:119-127. PubMed Abstract | Publisher Full Text OpenURL

  11. Baldauf NA, Rodriguez-Romo LA, Männig A, Yousef AE, Rodriguez-Saona LE: Effect of selective growth media on the differentiation of Salmonella enterica serovars by Fourier-Transform Mid-Infrared Spectroscopy.

    J Microbiol Meth 2007, 68:106-114. Publisher Full Text OpenURL

  12. Perkins DL, Lovell CR, Bronk BV, Setlow B, Setlow P, Myrick ML: Classification of endospores of Bacillus and Clostridium species by FT-IR reflectance microspectroscopy and autoclaving. In IM S 2005 - IEEE International Workshop on Measurement Systems for Homeland Security, Contraband Detection and Personal Safety: 29-30 March 2005. Orlando, FL, USA; 2005:81-87. OpenURL

  13. Yu C, Irudayaraj J: Spectroscopic characterization of microorganisms by Fourier transform infrared microspectroscopy.

    Biopolymers 2005, 77:368-377. PubMed Abstract | Publisher Full Text OpenURL

  14. Subramanian A, Ahn J, Balasubramanian VM, Rodriguez-Saona LE: Monitoring Biochemical changes in bacterial spore during thermal and pressure-assisted thermal processing using FT-IR spectroscopy.

    J Agric Food Chem 2007, 55:9311-9317. PubMed Abstract | Publisher Full Text OpenURL

  15. Naumann D: The characterization of microorganisms by Fourier-transform infrared spectroscopy (FT-IR). In Modern techniques for rapid microbiological analysis. Edited by Nelson WH. New York: VCH Publishers; 1990:43-96. OpenURL

  16. Mariey L, Signolle JP, Amiel C, Travert J: Discrimination, classification, identification of microorganisms using FTIR spectroscopy and chemometrics.

    Vibr Spectros 2001, 26:151-159. Publisher Full Text OpenURL

  17. Subramanian A, Rodriguez-Saona LE: Fourier transform infrared (FTIR) spectroscopy. In Infrared Spectroscopy for Food Quality Analysis and Control. Edited by Sun DW. Amsterdam: Elsevier; 2009:145-178. OpenURL

  18. Baldauf NA, Rodriguez-Romo LA, Yousef AE, Rodriguez-Saona LE: Differentiation of selected Salmonella enterica serovars by Fourier Transform mid-infrared spectroscopy.

    Appl Spectrosc 2006, 60:592-598. PubMed Abstract | Publisher Full Text OpenURL

  19. Connor N, Sikorski J, Rooney AP, Kopac S, Koeppel AF, Burger A, Cole SG, Perry EB, Krizanc D, Field NC, Slaton M, Cohan FM: Ecology of speciation in the genus Bacillus.

    Appl Environ Microbiol 2010, 76:1349-1358. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  20. Morsi NM, Atef NM, El-Hendawy H: Screening for some Bacillus spp. inhabiting Egyptian soil for the biosynthesis of biologically active metabolites.

    J Food Agric Environ 2010, 8:1166-1173. OpenURL

  21. McSpadden Gardener BB: Ecology of Bacillus and Paenibacillus spp. in agricultural systems.

    Phytopathology 2004, 94:1252-1258. PubMed Abstract | Publisher Full Text OpenURL

  22. Carrera M, Zandomeni RO, Fitzgibbon J, Sagripanti JL: Difference between the spore sizes of Bacillus anthracis and other Bacillus species.

    J Appl Microbiol 2007, 102:303-312. PubMed Abstract | Publisher Full Text OpenURL

  23. Forrester JB, Valentine NB, Su YF, Johnson TJ: Chemometric analysis of multiple species of Bacillus bacterial endospores using infrared spectroscopy: Discrimination to the strain level.

    Anal Chim Acta 2009, 651:24-30. PubMed Abstract | Publisher Full Text OpenURL

  24. Shida O, Takagi H, Kadowaki K, Komagata K: Proposal for two new genera, Brevibacillus gen. nov. and Aneurinibacillus gen. nov.

    Int J Syst Bacteriol 1996, 46:939-946. PubMed Abstract | Publisher Full Text OpenURL

  25. Teng JLL, Woo PCY, Leung KW, Lau SKP, Wong MKM, Yuen KY: Pseudobacteraemia in a patient with neutropenic fever caused by a novel paenibacillus species Paenibacillus hongkongensis sp. nov.

    Molec Pathol 2003, 56:29-35. Publisher Full Text OpenURL

  26. Helm D, Labischinsk H, Schallehn G, Naumann D: Classification and identification of bacteria by Fourier-Transform infrared-spectroscopy.

    J Gen Microbiol 1991, 137:69-79. PubMed Abstract OpenURL

  27. Haag H, Gremlich HU, Bergmann R, Sanglier JJ: Characterization and identification of actinomycetes by FT-IR spectroscopy.

    J Microbiol Methods 1996, 27:157-163. Publisher Full Text OpenURL

  28. Rönner U, Husmark U, Henriksson A: Adhesion of bacillus spores in relation to hydrophobicity.

    J Appl Microbiol 1990, (69):550-556. OpenURL

  29. Nováková J: Effect of clays on the microbe adsorption.

    Zentralbl Bakteriol Parasitenk, Infektionskrankh Hyg. 2. naturwiss Abt: Allg landwirt techn Mikrobiol 1977, 132:418-422. OpenURL

  30. Hunt JM, Wisherd MP, Bonham LC: Infrared absorption spectra of minerals and other inorganic compounds.

    Anal Chem 1950, 22:1478-1497. Publisher Full Text OpenURL

  31. Clark RN: Spectroscopy of rocks and minerals, and principles of spectroscopy. In Manual of Remote Sensing, Remote Sensing for the Earth Sciences. Volume 3. Edited by Rencz AN. New York: John Wiley and Sons; 1999::3-58. OpenURL

  32. Brandes Ammann A, Kölle L, Brandl H: Detection of bacterial endospores in soil by terbium fluorescence.

    Int J Microbiol 2011, in press. OpenURL

  33. Foster NS, Thompson SE, Valentine NB, Amonette JE, Johnson TJ: Identification of sporulated and vegetative bacteria using statistical analysis of Fourier transform mid-infrared transmission data.

    Appl Spectrosc 2004, 58:203-211. PubMed Abstract | Publisher Full Text OpenURL

  34. Patrick VA, Patrick CJ, Karakyriakos E: Method and system for the measurement of chemical species in caustic aluminate solutions.

    PCT Int Appl WO2007/098525 A1 2007, 34. OpenURL

  35. Agrahari S, Wadhwa N: Degradation of chicken feather a poultry waste product by keratinolytic bacteria isolated from dumping site at Ghazipur poultry processing plant.

    Int J Poult Sci 2010, 9:482-489. OpenURL