Skip to main content
Download PDF
  • Research article
  • Open access
  • Published:

Structural importance of the C-terminal region in pig aldo-keto reductase family 1 member C1 and their effects on enzymatic activity

BMC Structural Biology volume 15, Article number: 1 (2015) Cite this article

Abstract

Background

Pig aldo-keto reductase family 1 member C1 (AKR1C1) belongs to AKR superfamily which catalyzes the NAD(P)H-dependent reduction of various substrates including steroid hormones. Previously we have reported two paralogous pig AKR1C1s, wild-type AKR1C1 (C-type) and C-terminal-truncated AKR1C1 (T-type). Also, the C-terminal region significantly contributes to the NADPH-dependent reductase activity for 5α-DHT reduction. Molecular modeling studies combined with kinetic experiments were performed to investigate structural and enzymatic differences between wild-type AKR1C1 C-type and T-type.

Results

The results of the enzyme kinetics revealed that V max and k cat values of the T-type were 2.9 and 1.6 folds higher than those of the C-type. Moreover, catalytic efficiency was also 1.9 fold higher in T-type compared to C-type. Since x-ray crystal structures of pig AKR1C1 were not available, three dimensional structures of the both types of the protein were predicted using homology modeling methodology and they were used for molecular dynamics simulations. The structural comparisons between C-type and T-type showed that 5α-DHT formed strong hydrogen bonds with catalytic residues such as Tyr55 and His117 in T-type. In particular, C3 ketone group of the substrate was close to Tyr55 and NADPH in T-type.

Conclusions

Our results showed that 5α-DHT binding in T-type was more favorable for catalytic reaction to facilitate hydride transfer from the cofactor, and were consistent with experimental results. We believe that our study provides valuable information to understand important role of C-terminal region that affects enzymatic properties for 5α-DHT, and further molecular mechanism for the enzyme kinetics of AKR1C1 proteins.

Background

The aldo-keto reductase (AKR) superfamily is mostly comprised of monomeric oxidoreductases that catalyze NAD(P)H-dependent reductions of a wide range of aldehydes and ketones including steroids, carbohydrates, bile acids, and prostaglandins [1,2]. The AKRs have been classified into 14 families (AKR1 to AKR14) and AKR1 family have been further divided into 6 subfamilies (AKR1A to AKR1G) [3,4]. Among the subfamilies, AKR1C enzymes are known as hydroxysteroid dehydrogenases (HSDs) which play a pivotal role in metabolism and regulation of steroid hormones such as progesterone, 5α-dihydrotestosterone (DHT), and testosterone. Pig aldo-keto reductase family 1 member C1 (AKR1C1) shows both 3α- and 20α-HSD activities and also plays a crucial role in progesterone metabolism, maintenance of pregnancy, and hormone regulation during the estrous cycle [5]. It officially named as AKRlCL1 (aldo-keto reductase family 1, member C-like 1), consists of 14 amino acid residues longer than that of general AKR1C1 [3]. The longer amino acid residues have been reported to alter enzymatic activities of several steroid hormones [3]. The structures of AKRs have the (α/β)8-barrel or TIM-barrel motif and three conserved loop regions, loop A, B, and C, which are related with steroid hormone specificity [4]. The enzymes catalyze an ordered bisequential kenetic process in which binding of cofactor is obligatory for the reaction [6,7]. The nicotinamide group of NADPH cofactor lies in anti-conformation with respect to the ribose group, so that 4-pro-R-hydride is transferred from the cofactor to the 3-ketosteroid substrate [2,6,8]. The hydride transfer is mediated by a highly conserved catalytic tetrad consisting of Asp50, Tyr55, Lys84, and His117, where Tyr 55 acts as the general acid/base [9-11]. Recently we have identified two paralogous pig AKR1C1s with or without C-terminal region (R320 to L337) which was truncated by a non-synonymous variation [3]. Also, the C-terminal region significantly affects the NADPH-dependent reductase activity for 5α-DHT reduction [3].

In this study, we performed molecular modeling studies combined with kinetic experiments to examine structural difference between wild-type AKR1C1 (C-type) and C-terminal-truncated AKR1C1 (T-type) for 5α-DHT. Since there was no available experimental structure of pig AKR1C1, we have carried out homology modeling to build 3D structure models of the both types, which were used for molecular dynamics (MD) simulation study. Our findings provide structural insights into important role of C-terminal region of the enzyme. It can be helpful for understanding different enzymatic properties for 5α-DHT between C-type and T-type.

Methods

Materials

The following chemicals were used in the experiments; 5α-dihydrotestosterone (5α-DHT), methylglyoxal, 9,10-phenanthrenequinone and hydrindantin were purchased from Sigma (St. Louis, MO), and Ni-NTA chelating agarose CL-6B was purchased from Peptron company (Promega corporaton, USA). Bio-Rad Bradford Protein assay kit was purchased from (Bio-Rad Laboratories, Inc (South Korea). The others, including Na2HPO4, NaH2PO4, NaCl, bovine serum albumin (BSA), and imidazole, were purchased from Sigma (St. Louis, MO).

Recombinant protein purification

In previous study [3], two types of pPROEX HTb-AKR1CL1 clones were constructed for the production of his-tagged fusion proteins for C-type and T-type. They were used for the IPTG-induced expression of each of the clones in E. coli BL21. In this study, the IPTG-induced proteins were subjected to the affinity chromatography using Ni-NTA agarose, according to manufacturer's manual (Peptron, Daejon, Korea). Briefly, basal buffer for protein purification was prepared by 50 mM sodium phosphate buffer, pH8.0, and 500 mM NaCl. Imidazole (Sigma, USA) was added to required concentration according to purification manual with NTA Chelating Agarose CL-6B (Promega corporation, USA). The overexpressed cells were precipitated by centrifugation, and suspended by binding buffer including 5 mM imidazole. The collected cells were lyzed by SONICS Vibracell VCX750 Ultrasonic Cell Disruptor, which was done twice by conditions as following; 5 min by 2 sec interval of on/off and 35% amplitude during ice cooling. The supernatant to obtain water-soluble protein was collected from the cells treated by centrifugation for 30 min at 10,000 rpm, 4°C. Purification of the protein was done by NTA Chelating Agarose CL-6B (Promega corporation, USA) according to manufacturer’s directions. The purified recombinant proteins were concentrated by Ultrafree-0.5 Centrifugal Filter Device (Millipore Corporation, Germany). The concentrated proteins were quantified by Bio-Rad Bradford Protein assay kit (Bio-Rad Laboratories, Inc., Korea) by OD595 nm in wavelength. The purified proteins were added with 50% glycerol and 50 mM Sodium Phosphate Buffer (pH 6.4) for long-term storage at −20°C.

Measurement of NADPH-dependent carbonyl reductase activity

The reductase activity was measured under conditions described previously [12]. Reaction mixtures included 60 mM sodium phosphate (pH 6.5), purified recombinant proteins such as C-type and T-type, 0.1 mM NADPH and 0.1 mM substrates (the reproductive steroid hormones indicated above) and were incubated in a total volume of 0.5 ml at 37°C. The assay of reductase activity was spectrophotometrically carried out by monitoring the decrease in absorbance at 340 nm with time.

Statistical analysis

To determine kinetic parameters with a Michaelis–Menten plot, the data were analyzed by nonlinear regression using GraphPad prism 6 software (GraphPad Software Inc., San Diego, CA). Enzyme concentrations of 39 and 38.9 nmol/mg were used for the calculation of turnover rates (k cat) for C-type and T-type, respectively. The significant differences were analyzed by Student’s t-test (p < 0.01 or p < 0.05) using the above software. The results are expressed as means ± standard errors (S.E.) of at least 3 independent experiments.

Homology modeling

The sequence of pig AKR1C1 consisting of 337 amino acids, was obtained from UniProtKB (http://www.uniprot.org/) (accession no. Q1KLB4). In order to build a structure model of pig AKR1C1 homology modeling was conducted using Phyre2 server (Protein Homology/analogY Recognition Engine V 2.0) with intensive modeling mode [13], which the server utilizes multiple templates and ab initio techniques to predict 3D structure model. The generated homology model was subjected to energy minimization to refine the model as well as to reduce steric clashes. The minimization with the steepest descent algorithm for 10,000 steps was carried out by GROMACS 4.5.3 package [14,15] with CHARMM27 force field. The stereochemical quality of the model was assessed by PROCHECK [16], ProSA [17,18], and ERRAT [19]. All other analyses including multiple sequence alignment were done by Discovery Studio v3.1 (DS).

Molecular docking calculation

AKR1C1 C-type and T-type in complex with NADPH were subjected to molecular docking calculation. The structure of T-type was prepared by deleting the C-terminal region (R320 to L337) from C-type. The coordinates of the cofactor were taken from the structure of human AKR1C3 (PDB: 1S1P). The substrate, 5α-DHT, was downloaded from PubChem Compound Database (CID: 10635) [20]. Then 5α-DHT was subjected to energy minimization with CHARMm force field and implicit solvent model using DS. The binding pose of 5α-DHT was predicted using GOLD v 5.0.1 (Genetic Optimization for Ligand Docking) [21,22] which uses genetic algorithm (GA) for docking flexible ligands in the binding site of the protein. The binding site was assigned through Define and Edit Binding Site tool in DS. All residues within the radius of 5 Å of the center of binding sphere were included in the calculation and the number of GA runs was set to 100. All other parameters were used as their default values. The docking poses were ranked based on GOLD fitness score and top solution was selected as initial conformation for MD simulation.

Molecular dynamics simulation

MD simulations for C-type and T-type in complex with NADPH and 5α-DHT were performed using GROMACS 4.5.3 with CHARMM27 force field. Topology files for the ligands were obtained from SwissParam server [23]. At the beginning, protonation states of the ionizable residues were set at pH7. A water box with the size of 1.5 nm from the protein surface was created to make an aqueous environment, and immersed using explicit TIP3P water model [24]. The size of the system was 6.05 × 5.78 × 5.90 nm for C-type and 6.03 × 5.77 × 5.03 nm for T-type, respectively. Several water molecules were replaced with sodium ions to neutralize the system. Energy minimization for 10,000 steps was executed using steepest descent algorithm until the maximum force lower than 1000 kJ/mol. After minimization, the systems were subjected to 100 ps NVT equilibration at 300 K and then 100 ps NPT equilibration at 300 K and 1 bar of pressure. The equilibrated systems were used in 20 ns production runs under NPT ensemble. A constant temperature and pressure were kept using V-rescale thermostat [25] and Parrinello-Rahman barostat [26,27]. During the simulation, LINCS [28,29] and SETTLE [30] algorithms were used to constrain all bond lengths and the geometry of water molecules, respectively. Short-range interactions were treated with the cut-off value of 1.2 nm and long-range electrostatic interactions were calculated by applying particle mesh Ewald (PME) method [31,32]. The periodic boundary conditions were adopted to avoid edge effects. A grid spacing of 0.12 nm was applied for fast Fourier transform calculations. We repeated the simulations two times under the same conditions except that the simulation time was 10 ns. All simulations were performed with the time step of 2 fs and the coordinates were saved every 1 ps for analyses.

Results and discussion

The C-terminal region in AKR1C1 alters significantly the enzymatic properties to 5α-DHT

AKR1C1 exhibits broadly enzymatic activities to various steroid hormones [33]. Among steroid hormones, AKR1C1 originated from human, previously named as 20α-hydroxysteroid dehydrogenase, detects specifically to progesterone with high activity [33]. A variant truncated at the C-terminus of pig AKR1C1 was employed in this study. In our previous study, we found a new novel single nucleotide variant (SNV) truncated in C-terminus, where the SNV is a nonsense mutant lacking 18 amino acid residues (R320 to L337) in C-terminus [3]. During the evaluation of enzymatic activities with different steroid hormones, differential activities between AKR1C1 C- and T-types were shown, 5α-DHT being anyway the preferred substrate for both of them [3]. Therefore, 5α-DHT was employed for enzymatic kinetics in this study.

In order to analyze enzymatic activity of AKR1C1s, the enzymes were cloned into overexpression vector and then purified to homogeneity by affinity chromatography. The purified AKR1C1s were applied for enzymatic kinetics with substrate 5α-DHT and cofactor NADPH. The V max value of AKR1C1 T-type was 2.9 fold higher than that of C-type, but K m value was lower 1.6 fold (Figure 1 and Table 1). Furthermore, the values of k cat and catalytic efficiency of the T-type were 2.9 and 1.9 folds higher than those of C-type. These results suggest that C-terminal truncated AKR1C1 improves the values of V max, k cat and catalytic efficiency.

Figure 1
figure 1

A Michaelis-Menten plot from measurement of the NADPH-dependent reduction of 5α-DHT by recombinant AKR1C1 (WT) or AKR1C1 (ΔC term). The data, obtained from measurement of the NADPH-dependent reduction of 5α-DHT by recombinant AKR1C1 (WT) and AKR1C1 (ΔC term), were analyzed by nonlinear regression using GraphPad prism 6 software (GraphPad Software Inc., San Diego, CA). Each spot represents the mean ± S.E. (n=3).

Full size image
Table 1 Kinetic parameters for 5α-DHT reduction measured by spectrophotometer
Full size table

The structure prediction of pig AKR1C1 using homology modeling

Since crystal structure of pig AKR1C1 has not been determined yet, we have constructed the 3D structure model using four structures as templates; rat AKR1C9 (PDB: 1AFS), human AKR1C2 (PDB: 1 J96), human AKR1C3 (PDB: 1S1P), and rabbit AKR1C5 (PDB: 1Q5M). The multiple sequence alignment with the four templates revealed that catalytic tetrad of Asp50, Tyr55, Lys84, and His117 were conserved and they have high sequence identity and similarity with each template; 71.5% and 85.6% between Pig AKR1C1 and rat AKR1C9, 75.5% and 88.2% between Pig AKR1C1 and human AKR1C2, 75.9% and 88.8% between Pig AKR1C1 and human AKR1C3, 76.2% and 88.5% between Pig AKR1C1 and rabbit AKR1C5, respectively (Figure 2A). Since there was no proper structural information for 14 residues at the end of the C-terminal region of AKR1C1, the region was modeled by ab initio method. The homology model for pig AKR1C1 was refined through the energy minimization and it showed conserved loop regions which are structural features of AKR superfamily (Figure 2B). The stereochemical quality of the generated model was evaluated using three programs. Ramachandran plot obtained from PROCHECK showed that 90.9% of residues were in most favored regions and only one residue was in disallowed region (Figure 2C). Overall quality factor scores calculated from ERRAT and ProSA were 90.49 and −11.04, respectively.

Figure 2
figure 2

The result of homology modeling. A Multiple sequence alignment of pig AKR1C1 with rat AKR1C9 (PDB: 1AFS), human AKR1C2 (PDB: 1 J96), human AKR1C3 (PDB: 1S1P), and rabbit AKR1C5 (PDB: 1Q5M). B The 3D structure model of pig AKR1C1. Protein is represented as cartoon model and colored by secondary structure. Loop A, loop B, and loop C are displayed as yellow. C Ramachandran plot of pig AKR1C1 structure.

Full size image

Binding mode of 5α-DHT in the active site of AKR1C1 C-type and T-type

A molecular docking study was performed to discover proper binding conformations for 5α-DHT at the active site of the C-type and T-type. The docking conformations were clustered and ranked according to their GOLD fitness scores. A conformation having high fitness score in the most populated cluster was selected as putative binding pose of each system. The docking results revealed that 5α-DHT bound to the both types of AKR1C1 in a similar manner forming hydrophobic interactions with Tyr24, Leu54, Trp86, Phe118, Leu128, Trp227, Phe308, and Tyr310 which have been reported as key residues for steroid binding [34,35]. We found that 5α-DHT formed two hydrogen bonds with Tyr55 and His177 in the C-type, whereas, in the T-type, there was additional hydrogen bond with Leu129 as well as two hydrogen bonds. The final docking poses in C-type and T-type were used as initial structures in MD simulation study to understand the effect of C-terminal region on the enzymatic activity in atomic level. We evaluated the overall stability of MD simulations by calculating Cα root-mean-square deviation (RMSD), potential energy, and the number of intra-hydrogen bonds (Figure 3). The RMSD values for each system were converged to around 0.25 nm in C-type and 0.1 nm in T-type (Figure 3A). During the whole simulation time, the RMSD value of C-type was relatively higher than that of T-type with the average value of 0.23 nm and 0.11 nm, respectively. The RMSD plot for only 5α-DHT also revealed that the substrates in both C- and T-types achieved stabilization and their average values were 0.03 nm (inserted in Figure 3A). Moreover, potential energy and the number of intra-hydrogen bonds for the systems remained constant for the simulation time (Figure 3B and C). These results indicate that the MD simulations for both systems were successfully completed and there were no abnormal behaviors in the structures throughout the simulation time. A structural comparison between the C-type and T-type was performed using their representative structures which were the closest snapshot to the average of all snapshots obtained from the last 5 ns. Although there were no significant conformational changes in both systems, they showed a difference in 5α-DHT binding in terms of hydrogen bond interactions (Figure 4). The C-type showed only one hydrogen bond interaction between oxygen atom of 5α-DHT and hydrogen atom of His117 with the distance of 0.21 nm (Figure 5A). On the other hand, oxygen atoms of 5α-DHT formed hydrogen bonds with hydrogen atoms of Tyr55 and His177 in T-type and the distances of bonds were within 0.21 nm (Figure 5B). The residues Tyr24, Leu54, Trp86, Leu128, Leu129, Trp227, Phe308, and Tyr310 in both structures were participated in hydrophobic interactions which were similar to that observed in the initial docked structures. These further stabilized 5α-DHT binding in both active sites.

Figure 3
figure 3

The overall stability of MD simulation. A RMSD for protein Cα atoms and 5α-DHT (inserted graph), B potential energy, and C the number of intra-hydrogen bonds were calculated during 20 ns simulation time. AKR1C1 C-type and T-type are represented as blue and red lines, respectively.

Full size image
Figure 4
figure 4

Superposition of C-type and T-type. The C-type was superimposed into T-type using Cα atoms of the proteins. The C-type (blue) and T-type (pink) are shown as cartoon models and loop regions are drawn as more dark colors. NADPH and 5α-DHT are indicated as stick models. Only polar hydrogens are shown.

Full size image
Figure 5
figure 5

Binding mode of 5α-DHT in the active site of AKR1C1. A 5α-DHT binding in C-type, B in T-type. The C-type (blue) and T-type (pink) are depicted as cartoon models while NADPH, 5α-DHT, and the residues involving molecular interactions with 5α-DHT are shown as stick model and labeled. The hydrogen bonds are shown as black dash lines.

Full size image

Difference in 5α-DHT binding between C- type and T-type

A major difference in 5α-DHT binding for C-type and T-type of AKR1C1 was the relative distance from Tyr55 which is important to initiate the catalytic reaction of the enzyme. The C3 ketone of 5α-DHT in the T-type was positioned much closer to the catalytic tetrad and the 4-pro-R hydride of the NADPH than in the C-type (Figure 6A). The distance between C3 position of 5α-DHT and C4 position in nicotinamide ring of NADPH were 0.41 nm in C-type and 0.42 nm in T-type. In contrast, the distance between the C3 of the 5α-DHT and hydroxyl group of Tyr55 in T-type was 0.20 nm which is much shorter than the value of 0.45 nm in C-type. The monitoring these distances during 20 ns simulation time revealed that the both distances were relatively short in T-type compared to C-type (Figure 6B and C). Superimposition of the two structures showed that 5α-DHT in T-type was sandwiched between Leu54 and Trp227 and its β-face was oriented toward Trp227, whereas in the case of C-type, the flipping of the side chain of Trp227 hindered the interaction with β-face of 5α-DHT (Figure 7). The side chain of Tyr24 also showed different conformation in the both types and that was probably due to displacement of Trp227. From the structural comparison, it appears that binding conformation of 5α-DHT in T-type was more favorable for catalytic reaction than that of C-type. In root mean square fluctuation (RMSF) plot, it was observed that the residues 226–229 in T-type exhibited higher flexibility than in C-type, while flexibilities of other residues were quite similar in the both structures except for highly flexible regions such as N- or C-terminal part of the protein (Figure 8). These differences might be explained by flipping of Trp227 in C-type. From RMSD plot calculated using all atoms of Trp227, the RMSD value in C-type showed relatively high with the average of 0.12 nm and it started to increase from 5 ns (Figure 9). In the simulation for C-type, the flipping of Trp227 side chain was observed and 5α-DHT was gradually alienated from Tyr55 during that time. Compared to C-type, RMSD value of Trp227 in T-type was very stable, less than 0.05 nm, throughout 20 ns simulation time and the average value was 0.03 nm. This might be related to the observation that flipping of Trp227 hardly ever happened in T-type. These analyses demonstrated that the instability of Trp227 caused by flipping of the side chain might be correlated with the distance from 5α-DHT to the hydroxyl group of Tyr55. Additionally, the interaction energy between 5α-DHT and the protein was −36.42 kcal/mol in C-type and −44.98 kcal/mol in T-type. It also indicated that 5α-DHT in T-type had energetically favorable conformation.

Figure 6
figure 6

The measurement of key distance for reduction reaction. A The crucial distance to initiate catalytic reaction and relative position of the catalytic tetrad and cofactor in the active site of C-type and T-type. The catalytic tetrad and 5α-DHT in C-type (blue) and T-type (pink) are displayed as stick models. The key distances are given in nm. B The distance between C3 of 5α-DHT and C4N of NADPH. C The distance between C3 of 5α-DHT and OH of Tyr55. The both distances in C- and T-types were measured during 20 ns simulation time. Blue and red lines indicate C-type and T-type, respectively.

Full size image
Figure 7
figure 7

Comparison of the 5α-DHT binding in the active site of C-type and T-type. Interacting residues and 5α-DHT in C-type (blue) and T-type (pink) are drawn as stick models.

Full size image
Figure 8
figure 8

RMSF plot showing the atomic fluctuations by residues of C-type and T-type. RMSF values for Cα atoms of the proteins are drawn as blue and red lines, respectively.

Full size image
Figure 9
figure 9

RMSD plot for Trp227 of C-type and T-type. RMSD values for all atoms of Trp227 are displayed as blue and red lines, respectively.

Full size image

Conclusions

The study of enzyme kinetics revealed that the C-terminal region in AKR1C1 contributed significantly the enzymatic properties for 5α-DHT reduction. To gain structural insights into the difference between C-type and T-type of AKR1C1 for 5α-DHT reduction, MD simulations for both structures were carried out. Prior to the simulation, we generated homology model structure for AKR1C1 due to lack of experimentally determined structures. Then C-type and T-type in complex with 5α-DHT obtained from molecular docking study were used as initial conformations for MD simulation. Although there were no significant conformational changes in both systems during 20 ns simulation time, binding conformations of 5α-DHT were different in the active site of C-type and T-type. The structural comparisons showed that T-type formed strong hydrogen bonds with Tyr55 and His117, while only His117 was found in C-type. To initiate catalytic reaction, the C3 ketone group of 5α-DHT should be close to Tyr55 and the nicotinamide ring of NADPH which are involved in hydride transfer. The distances between these groups were monitored during 20 ns simulation time. As a result, 5α-DHT was close to the cofactor in the both structures, whereas the distance between 5α-DHT and Tyr55 in T-type was relatively much shorter than C-type. On the contrary, the flipping of the side chain of Trp227 in C-type might disrupt the interaction with β-face of 5α-DHT. The interaction energies between 5α-DHT and the proteins also indicated that T-type was energetically stable compared to C-type. Taken together, our simulation results demonstrated that binding conformation of 5α-DHT in T-type was more favorable for catalytic reaction than that of C-type. These structural explanations were also in agreement with kinetic experimental results. Our findings will be useful to understand molecular mechanism for the enzyme kinetics of AKR1C1 protein.

References

  1. Jez J, Bennett M, Schlegel B, LEWIS M, Penning T. Comparative anatomy of the aldo–keto reductase superfamily. Biochem J. 1997;326:625–36.

    CAS  PubMed Central  PubMed  Google Scholar 

  2. Penning TM. Hydroxysteroid dehydrogenases and pre-receptor regulation of steroid hormone action. Hum Reprod Update. 2003;9(3):193–205.

    Article  CAS  PubMed  Google Scholar 

  3. Kwon S, Bang W, Jeong J, Cho H, Park DH, Hwang J, et al. Important role of the C-terminal region of pig aldo-keto reductase family 1 member C1 in the NADPH-dependent reduction of steroid hormones. Indian J Biochem Biophys. 2013;50(3):237.

    CAS  PubMed  Google Scholar 

  4. Hyndman D, Bauman DR, Heredia VV, Penning TM. The aldo-keto reductase superfamily homepage. Chem Biol Interact. 2003;143:621–31.

    Article  PubMed  Google Scholar 

  5. Seo K-S, Naidansuren P, Kim S-H, Yun S-J, Park J-J, Sim B-W, et al. Expression of aldo-keto reductase family 1 member C1 (AKR1C1) gene in porcine ovary and uterine endometrium during the estrous cycle and pregnancy. Reprod Biol Endocrinol. 2011;9(1):139-139.

    Article  Google Scholar 

  6. Askonas LJ, Ricigliano JW, Penning TM. The kinetic mechanism catalysed by homogeneous rat liver 3 alpha-hydroxysteroid dehydrogenase. Evidence for binary and ternary dead-end complexes containing non-steroidal anti-inflammatory drugs. Biochem J. 1991;278:835–41.

    CAS  PubMed Central  PubMed  Google Scholar 

  7. Grimshaw CE, Bohren KM, Lai C-J, Gabbay KH. Human aldose reductase: rate constants for a mechanism including interconversion of ternary complexes by recombinant wild-type enzyme. Biochemistry. 1995;34(44):14356–65.

    Article  CAS  PubMed  Google Scholar 

  8. Penning TM, Drury JE. Human aldo–keto reductases: function, gene regulation, and single nucleotide polymorphisms. Arch Biochem Biophys. 2007;464(2):241–50.

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  9. Schlegel BP, Jez JM, Penning TM. Mutagenesis of 3α-Hydroxysteroid Dehydrogenase Reveals a “Push−Pull” Mechanism for Proton Transfer in Aldo−Keto Reductases†. Biochemistry. 1998;37(10):3538–48.

    Article  CAS  PubMed  Google Scholar 

  10. Bohren KM, Grimshaw CE, Lai CJ, Harrison DH, Ringe D, Petsko GA, et al. Tyrosine-48 is the proton donor and histidine-110 directs substrate stereochemical selectivity in the reduction reaction of human aldose reductase: enzyme kinetics and crystal structure of the Y48H mutant enzyme. Biochemistry. 1994;33(8):2021–32.

    Article  CAS  PubMed  Google Scholar 

  11. Grimshaw CE, Bohren KM, Lai C-J, Gabbay KH. Human aldose reductase: pK of tyrosine 48 reveals the preferred ionization state for catalysis and inhibition. Biochemistry. 1995;34(44):14374–84.

    Article  CAS  PubMed  Google Scholar 

  12. Tanaka M, Ohno S, Adachi S, Nakajin S, Shinoda M, Nagahama Y. Pig testicular 20 beta-hydroxysteroid dehydrogenase exhibits carbonyl reductase-like structure and activity. cDNA cloning of pig testicular 20 beta-hydroxysteroid dehydrogenase. J Biol Chem. 1992;267(19):13451–5.

    CAS  PubMed  Google Scholar 

  13. Kelley LA, Sternberg MJ. Protein structure prediction on the Web: a case study using the Phyre server. Nat Protoc. 2009;4(3):363–71.

    Article  CAS  PubMed  Google Scholar 

  14. Berendsen HJ, van der Spoel D, van Drunen R. GROMACS: A message-passing parallel molecular dynamics implementation. Comput Phys Commun. 1995;91(1):43–56.

    Article  CAS  Google Scholar 

  15. Van Der Spoel D, Lindahl E, Hess B, Groenhof G, Mark AE, Berendsen HJC. GROMACS: fast, flexible, and free. J Comput Chem. 2005;26(16):1701–18.

    Article  Google Scholar 

  16. Laskowski RA, MacArthur MW, Moss DS, Thornton JM. PROCHECK: a program to check the stereochemical quality of protein structures. J Appl Crystallogr. 1993;26(2):283–91.

    Article  CAS  Google Scholar 

  17. Wiederstein M, Sippl MJ. ProSA-web: interactive web service for the recognition of errors in three-dimensional structures of proteins. Nucleic Acids Res. 2007;35 suppl 2:W407–10.

    Article  PubMed Central  PubMed  Google Scholar 

  18. Sippl MJ. Recognition of errors in three‐dimensional structures of proteins. Proteins: Structure, Funct Bioinformatics. 1993;17(4):355–62.

    Article  CAS  Google Scholar 

  19. Colovos C, Yeates TO. Verification of protein structures: patterns of nonbonded atomic interactions. Protein Sci. 1993;2(9):1511–9.

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  20. Bolton EE, Wang Y, Thiessen PA, Bryant SH. PubChem: integrated platform of small molecules and biological activities. Annu Rep Comput Chem. 2008;4:217–41.

    Article  CAS  Google Scholar 

  21. Jones G, Willett P, Glen RC, Leach AR, Taylor R. Development and validation of a genetic algorithm for flexible docking. J Mol Biol. 1997;267(3):727–48.

    Article  CAS  PubMed  Google Scholar 

  22. Verdonk ML, Cole JC, Hartshorn MJ, Murray CW, Taylor RD. Improved protein–ligand docking using GOLD. Proteins: Structure, Funct Bioinformatics. 2003;52(4):609–23.

    Article  CAS  Google Scholar 

  23. Zoete V, Cuendet MA, Grosdidier A, Michielin O. SwissParam: a fast force field generation tool for small organic molecules. J Comput Chem. 2011;32(11):2359–68.

    Article  CAS  PubMed  Google Scholar 

  24. Jorgensen WL, Chandrasekhar J, Madura JD, Impey RW, Klein ML. Comparison of simple potential functions for simulating liquid water. J Chem Phys. 1983;79:926.

    Article  CAS  Google Scholar 

  25. Bussi G, Donadio D, Parrinello M. Canonical sampling through velocity rescaling. J Chem Phys. 2007;126(1):014101.

    Article  PubMed  Google Scholar 

  26. Parrinello M, Rahman A. Polymorphic transitions in single crystals: A new molecular dynamics method. J Appl Phys. 1981;52(12):7182–90.

    Article  CAS  Google Scholar 

  27. Nosé S, Klein M. Constant pressure molecular dynamics for molecular systems. Mol Phys. 1983;50(5):1055–76.

    Article  Google Scholar 

  28. Ryckaert JP, Ciccotti G, Berendsen HJC. Numerical integration of the cartesian equations of motion of a system with constraints: molecular dynamics of n-alkanes. J Comput Phys. 1977;23(3):327–41.

    Article  CAS  Google Scholar 

  29. Hess B, Bekker H, Berendsen HJC, Fraaije JGEM. LINCS: a linear constraint solver for molecular simulations. J Comput Chem. 1997;18(12):1463–72.

    Article  CAS  Google Scholar 

  30. Miyamoto S, Kollman PA. SETTLE: an analytical version of the SHAKE and RATTLE algorithm for rigid water models. J Comput Chem. 1992;13(8):952–62.

    Article  CAS  Google Scholar 

  31. Darden T, York D, Pedersen L. Particle mesh Ewald: An N log (N) method for Ewald sums in large systems. J Chem Phys. 1993;98:10089-10089.

    Article  Google Scholar 

  32. Essmann U, Perera L, Berkowitz ML, Darden T, Lee H, Pedersen LG. A smooth particle mesh Ewald method. J Chem Phys. 1995;103(19):8577–93.

    Article  CAS  Google Scholar 

  33. Zhang Y, Dufort I, Rheault P. Characterization of a human 20alpha-hydroxysteroid dehydrogenase. J Mol Endocrinol. 2000;25(2):221–8.

    Article  PubMed  Google Scholar 

  34. Nahoum V, Gangloff A, Legrand P, Zhu D-W, Cantin L, Zhorov BS, et al. Structure of the Human 3α-Hydroxysteroid Dehydrogenase Type 3 in Complex with Testosterone and NADP at 1.25-Å Resolution. J Biol Chem. 2001;276(45):42091–8.

    Article  CAS  PubMed  Google Scholar 

  35. Bennett MJ, Albert RH, Jez JM, Ma H, Penning TM, Lewis M. Steroid recognition and regulation of hormone action: crystal structure of testosterone and NADP+ bound to 3-hydroxysteroid/dihydrodiol dehydrogenase. Structure. 1997;5(6):799–812.

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgments

This work was supported by grants from Priority Research Centers Program (2011–0022965) and Management of Climate Change Program (2010–0029084) through the National Research Foundation of Korea (NRF) funded by the Ministry of Education of Republic of Korea, the project, “Search & Discovery of Utility Value from Biological Resources (2015)”, from the National Institute of Biological Resources of Korean Government, the Export Promotion Technology Development Program (no. 313012–05) of Ministry of Food, Agriculture, Forestry and Fisheries, Republic of Korea. And this work was also supported by the Next-Generation BioGreen 21 Program (PJ009486) from Rural Development Administration (RDA) of Republic of Korea.

Author information

Authors and Affiliations

  1. Division of Applied Life Science (BK21 Plus), Systems and Synthetic Agrobiotech Center (SSAC), Plant Molecular Biology and Biotechnology Research Center (PMBBRC), Research Institute of Natural Science (RINS), Gyeongsang National University (GNU), 501 Jinju-daero, Jinju, 660-701, Republic of Korea

    Minky Son, Chanin Park & Keun Woo Lee

  2. Swine Science and Technology Center, Gyeongnam National University of Science & Technology, Jinju, 660-758, Korea

    Seul Gi Kwon, Sam Woong Kim & Chul Wook Kim

  3. National Institute of Biological Resources, Environmental Research Complex, Incheon, 404-708, Korea

    Woo Young Bang

Authors
  1. Minky Son
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chanin Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Seul Gi Kwon
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Woo Young Bang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Sam Woong Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Chul Wook Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Keun Woo Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Chul Wook Kim or Keun Woo Lee.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

MS and CP performed structural modeling and analyzed data. SGK, WYB, and SWK designed the study and carried out the experiments and statistical analysis. MS, CP, SGK, WYB, and SWK wrote the manuscript. CWK and KWL interpreted the data and correct the manuscript. All authors read and approved the final manuscript.

Minky Son, Chanin Park and Seul Gi Kwon contributed equally to this work.

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Son, M., Park, C., Kwon, S.G. et al. Structural importance of the C-terminal region in pig aldo-keto reductase family 1 member C1 and their effects on enzymatic activity. BMC Struct Biol 15, 1 (2015). https://doi.org/10.1186/s12900-014-0028-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12900-014-0028-7

Keywords

BMC Structural Biology

ISSN: 1472-6807

Contact us