Skip to main content
  • Research article
  • Open access
  • Published:

Pseudomonas fluorescens biofilms subjected to phage phiIBB-PF7A

Abstract

Background

Pseudomonas fluorescens is an important food spoilage organism, usually found in the form of biofilms. Bacterial biofilms are inherently resistant to a variety of antimicrobial agents, therefore alternative methods to biofilm control, such as bacteriophages (phages) have been suggested. Phage behavior on biofilms is still poorly investigated and needs further understanding. Here we describe the application of phage Ï•IBB-PF7, a newly isolated phage, to control P. fluorescens biofilms. The biofilms were formed under static or dynamic conditions and with or without renewal of medium.

Results

Conditions for biofilm formation influenced the feature of the biofilm and the morphology of P. fluorescens. Biomass removal due to phage activity varied between 63 and 91% depending on the biofilm age and the conditions under which the biofilm had been formed and phages applied. Removal of the biofilm by phage treatment was faster in younger biofilms, but the same number of surviving cells was detected in all tested biofilms, after only 4 h of treatment, even in older biofilms. Under static conditions, a 3 log higher number of phage progeny remained either inside the biofilm matrix or attached to the substratum surface than under dynamic conditions, pointing to the importance of experimental conditions for the efficacy of phage entrapment into the biofilm.

Conclusion

Phage Ï•IBB-PF7A is highly efficient in removing P. fluorescens biofilms within a short time interval. The conditions of biofilm formation and applied during phage infection are critical for the efficacy of the sanitation process. The integration of phages into the biofilm matrix and their entrapment to the surface may be further beneficial factors when phage treatment is considered alone or in addition to chemical biocides in industrial environments where P. fluorescens causes serious spoilage.

Background

Pseudomonas fluorescens is a spoilage causing bacterium present in a variety of food related environments. In dairy industry, P. fluorescens is one of the most commonly isolated psychrotrophic bacteria that dominate the microflora of raw or pasteurized milk at the time of spoilage [1–6]. This spoilage ability is mostly due to the capability of producing heat-stable extracellular lipases, proteases and lecithinases that survive the thermal processing steps [2, 7–9]. This bacterium is also one of the three most predominantly isolated bacteria associated with spoilage of fresh poultry and reports of spoilage due to P. fluorescens date since the 1930s [10–13]. More recently, some studies have revealed that some strains of Pseudomonas can increase the colonization of inert surfaces by Listeria monocytogenes [14] and/or protect this pathogenic bacterium from disinfectants[15]. There are also studies reporting spoilage of refrigerated foods with P. fluorescens, in particular of refrigerated meat products [16–18]. The contamination of the meats results in changes in appearance and odour during prolonged storage. Furthermore, P. fluorescens is also recognized to be a model organism for biofilm studies as it can easily form biofilms in different laboratory simulators [19–21].

The interest in applied bacteriophage research has increased during recent years mainly due to positive results obtained with phage therapy applied to animals [22–25]. Also phage application to certain meat products was allowed, since August 2006, by the United States Food and Drug Administration (FDA) in order to control Listeria monocytogenes [26]. Moreover, there is an increase in the number of patents of application of phages to control pathogenic bacteria in industrial environments and foodstuffs [27–30]. The idea in this area is to either keep the pathogen propagation limited by the phages over long times, e.g. by insertion of phages in surface layers (e.g. [31]) or to apply phages at different stages of production and processing to reduce food product contamination at that point or to protect against contaminations at subsequent points, which can be performed also in combination of sterilizing chemical agents as long as these agents do not reduce the biological activity of the phages [30].

Biofilm phenomena have been studied over many years and it is generally recognized that this bacterial lifestyle on surfaces is dominant. Although many studies involve phage infection of cells, most of them only consider planktonic bacteria. Bacteria attached to surfaces have totally different characteristics such as they are embedded in a matrix composed of exopolysaccharides, proteins and nucleic acids and the cells represent different growth stages. As phage infection and life cycle generally strongly depend from the growth stage of the host bacterium (see e.g. [32, 33]) the treatment of slowly growing cells in biofilms is a challenge. Some studies have already been made regarding the application of phages to eradicate bacteria in the form of biofilm [31, 34–39] nonetheless more understanding of phage action in biofilm influenced by age and formation conditions is still required.

In a previous work with biofilms [38] it was already showed that under optimal conditions phage Ï•S1 could infect well P. fluorescens biofilms. This was a study performed with a culture collection host and phage system that had been isolated from soil. Here a P. fluorescens isolated from a dairy industry was used. The bacterium was isolated from a biofilm present on the stainless steel teatcup shell which indicates that this isolate would easily form biofilms on stainless steel slides. The aim of this work was to study the application of the recently isolated and characterized T7-like bacteriophage Ï•IBB-PF7A [40] to control P. fluorescens biofilms. Aside from a very high efficiency of this phage in biofilm removal, different conditions applied for biofilm formation and during phage application proved their influence on the time kinetics of the phage absorption and biofilm removal process. Interestingly however, the single species model biofilm was efficiently removed under all conditions which suggests phage Ï•IBB-PF7A to be a superior sanitation agent.

Results

Biofilms formed under different conditions

In this work, P. fluorescens biofilms were allowed to form onto stainless steel (SS) slides, which is a common substratum used in the dairy industry. Three different experimental approaches for biofilm formation were applied: (i) static conditions, i.e. no shaking applied, with media renewal every 12 h (SR), (ii) dynamic conditions, i.e. incubation on an orbital shaker, with media renewed every 12 h (DR), and (iii) dynamic conditions without renewal of cultivation medium (DNR) (see Methods for description of the different conditions). Also, different biofilm ages were studied ranging from 24 up to 168 hours.

The number of cells present on SS slides was assessed after different periods of biofilm formation (Fig. 1). Lowest cell counts, detected as colony forming units after removal of the cells from the substratum, were obtained from biofilms which were incubated under shaking conditions (dynamic conditions) with an additional renewal of the cultivations medium. Dependent on the incubation period, 10 to 100 times higher cell numbers were detected from coupons which were incubated without any turbulence, i.e. under static (SR) conditions (Fig. 1). Interestingly, the difference in the number of colony forming units between the different conditions decreased with the time of incubation.

Figure 1
figure 1

Number of biofilm cells present on stainless steel slides. P. fluorescens biofilms were formed during different times on stainless steel slides under different conditions: static with media renewal (SR), dynamic with media renewal (DR), dynamic non-renewal of media (DNR). For all experiments n = 6. Error bars indicate standard deviations.

Additionally to the determination of colony forming units, also the dry weight of the biofilms was analyzed. These dry weight measurements cannot be directly correlated with viable cell numbers (Table 1). For example, the viable cell counts obtained from biofilms which were cultivated for 72 h under static or dynamic conditions (DR and SR) were practically identical, but the determined dry weight was clearly different. This difference in dry weigh is most likely due to different amounts of EPS matrix present in these different biofilms.

Table 1 Biomass before and after 4 h of phage application to different biofilms and biomass removal percentages

In order to better characterize the effect of dynamic conditions on the biofilm, samples after incubation for 24 to 168 hours were analyzed by field emission scanning microscopy (FESEM) (Fig. 2). The FESEM micrographs show a predominance of filamentous cells in early stage biofilms (24 h and 72 h) and a shift to rod-shape forms in older biofilms (120 h and 168 h).

Figure 2
figure 2

Dynamic P. fluorescens biofilms formed on stainless steel slides with media renewal every 12 h. FESEM micrographs before phage application: a) 24 h; b) 72 h; c) 120 and d) 168 h old biofilm.

For the dynamic conditions without renewal of medium biofilm formation was studied only during 24 h and 72 h, as there was clearly decreased biofilm formation ability, most likely due to the lack of nutrients.

Overall, this study shows that the biofilm formation conditions influence the number of cells and biomass present on the coupons as well as the P. fluorescens cell morphology. This study is an important basis for the valuation of the effects of bacteriophages.

Efficacy of phage Ï•IBB-PF7A to control biofilms

Single species biofilms do not mimic real conditions, but these biofilms determinedly present advances in the biofilm-phage interaction research field. Here we wanted to investigate how effective the recently isolated T7-like bacteriophage ϕIBB-PF7A [40] is in controlling biofilms under static and dynamic conditions. In these experiments the number of phages applied was 1 × 107 PFU ml-1 as this concentration is in the range of normally used phage solutions (1 × 106 PFU ml-1 to × 1010 PFU ml-1) [34, 37–39].

Initial tests performed with biofilms and phage ϕIBB-PF7A showed that maximum cell reduction was achieved within 4 hours. Therefore, the effect of the phages was followed over a time interval of two and four hours respectively, which is clearly lower than the 24 hours infection period used in other biofilm-phage studies [39, 41–43].

As a negative control we also investigated biofilms immersed for four hours in a solution of SM buffer and TSB without addition of phages in order to verify that the observed effects are really related to the phages and not to a detachment of the biofilms as a response to the addition of new SM medium.

In order to evaluate the phage ability to infect the different P. fluorescens biofilms described above, samples were taken after two and four hours for cell and phage enumeration. Already two hours after phage addition, a very strong reduction of the number of cells on the SS slides was observed for all the different biofilms (Fig. 3). In older biofilms (120 h and 168 h) the phage acted somewhat slower, obviously older, stationary phase biofilms delay the cell lysis process. However, under all tested conditions, a 3 to 5 log order reduction of the cell count was detected during only four hours of phage exposure.

Figure 3
figure 3

Number of P. fluorescens biofilm and planktonic cells before and after exposure to phage Ï•IBB-PF7A. Cells before phage (time 0 h), control experiments performed for 4 h in SM buffer-TSB, phage exposure for 2 h and 4 h are presented in biofilms were formed under: a) static with media renewal (SR), b) dynamic with media renewal (DR), and c) dynamic with non-renewal of media (DNR). For all experiments n = 6. Error bars indicate standard deviations.

Biofilm cell reduction was about one order of magnitude higher in static conditions compared to dynamic conditions, despite of the clearly different cell morphology (compare Figs. 3a and 3b). Furthermore, we also wanted to investigate whether the application of the phages leads to the release of cells. Measurements of cell numbers in the planktonic phase showed that in phage infection experiments there was a detachment of cells or clusters of cells into the liquid medium, although these numbers were quite low, generally below 103 cells per ml. The measurements of the control coupons show that the biofilms are not detached due to the half-strength TSB and the cell numbers are similar to those at the start of the experiments (Fig. 3) and therefore we conclude that the detachment in phage infection experiments is only due to the presence of phages.

The number of phages in the planktonic phase was approximately the same after infection of the different biofilms (Fig. 4). The main difference in phage counts was related to phages adsorbed to the biofilms and SS slides. A higher number of phages adsorbed to the biofilms and SS slides under static conditions. However, infection under dynamic conditions decreased the ability of phages to adsorb to the substratum and remaining biofilms. Despite this, it was surprising that the number of phages found to be absorbed is approximately in the order of magnitude of the phages applied for the treatment, which indicates a very efficient reproduction of the phages.

Figure 4
figure 4

Number of phages used to infect the different biofilms and progeny phages adsorbed and released after 4 h of infection of biofilms. Horizontal line: initial number of phages used, static biofilms with media renewal (SR), dynamic biofilms with media renewal (DR); dynamic biofilms without media renewal (DNR). For all experiments n = 6. Error bars indicate standard deviations.

FESEM micrograph taken after 30 min of exposure of a 24 h static biofilm to phage Ï•IBB-PF7A shows some individual rod-shaped cells as well as a vast number of phages adsorbed to the SS slides and to the bacteria. The phages appear either individually or as groups of phages (Fig. 5).

Figure 5
figure 5

P. fluorescens cells and Ï•IBB-PF7A phages on stainless steel slides. FESEM micrograph taken after infection 30 min of infection of a 24 h static P. fluorescens biofilm formed with media renewal every 12 h.

Table 1 shows the dry weight on the slides before and after four hours of phage application and the relative biomass decrease after infection of different biofilms. Four hours after infection a considerable biomass decrease was observed for all biofilms. The relative biomass removal accounted for 63 to 91%. In general, older biofilms (120 h and 168 h) showed a lower biomass decrease, most probably due to a higher amount of cellular debris that stayed attached to the SS surfaces (Fig. 6). This cellular debris and dead cells still constitute important sites for phage attachment.

Figure 6
figure 6

Cellular debris and biofilm remains on stainless steel slides after 4 hours of phage Ï•IBB-PF7A infection of dynamic P. fluorescens biofilms formed with renewal of media every 12 h. FESEM micrographs: a) 24 h; b) 72 h; c) 120 and d) 168 h old biofilm.

Four hours after phage application, in all experiments, cells from the remaining biofilms were isolated and tested for resistance to the stock phage solution. In none of these tests we found phage-resistant bacteria, indicating that the time of the experiment was not long enough for the bacteria to acquire any form of resistance (data not shown) as described previously by other authors [39, 44].

Phage Ï•IBB-PF7A is a potential efficient biological agent to control biofilms as the phage's action on biofilms resulted in good biofilm cell log decreases factors and high percentual biomass removal.

Discussion

P. fluorescens is a known milk product contaminant being able to produce extracellular enzymes that spoil milk products. In this work P. fluorescens biofilms were challenged with a newly isolated lytic phage. The data presented here, shows the potential of the novel phage ϕIBB-PF7A [40] for controlling and reducing the P. fluorescens biofilms formed under three different conditions. Phage ϕIBB-PF7A was able to reduce greatly the number of biofilm cells present on stainless steel slides already after 2 h of infection experiment and this reduction was even more noticeable after 4 h of phage application. The biofilm cell log reduction factors, after 4 h of phage exposure varied between 3 and 5. Complete eradication was not achieved in any of the studied cases, however it is evident that phage ϕIBB-PF7A can greatly decrease the number of biofilm cells present on the surfaces. Similar cell log reductions have been reported in other biofilm-phage experiments, however in all these other studies the phage infection period used was 24 h [39, 41–43]. This shows that phage ϕIBB-PF7A has very good potential as a biofilm control agent as it can achieve the same result in only 4 hours.

In this study, the formation of biofilms on substrata immersed on microplates does not imitate true conditions observed in a variety of environments; nevertheless it is a simple, rapid and reproducible method with which it is easy to assess the influence of different parameters. Biofilms formed show that P. fluorescens are able to grow either as rod-shaped or as filamentous like form. This change in morphology is due to the rotation applied (100 rpm) to form dynamic biofilms. However, there is a clear switch on the cell morphology: young biofilms (24 h and 72 h) are predominantly filamentous like, while older biofilms (120 h and 168 h) consist of more rod-shaped cells (Fig. 2). Unlike in P. aeruginosa and P. putida where this filamentous cell morphology has already been described [45–47], a filamentous morphology has not been reported for P. fluorescens.

Biofilm cell lysis starts faster under dynamic than under static conditions, but interestingly, the total relative biofilm reduction after four hours was not as effective in dynamic biofilms compared to static biofilms. Under dynamic conditions, phages probably meet their hosts faster than on static conditions, indicating the important role of the convection mechanism. Conversely, under static conditions, the lack of agitation keeps the progeny phages in the proximity to other neighboring biofilm cells. Under static conditions, the new phages, which are released due to phage infection and lysis of the host cells, are not transferred to the bulk and this enhances the biofilm cell lysis. This hypothesis is confirmed by the values of adsorbed phage counts which were more than two orders of magnitude higher under static conditions compared to dynamic conditions (~1 × 107 and <1 × 105 PFU ml-1 respectively). In both situations the phage numbers in the planktonic phase were approximately the same (1 × 109 PFU ml-1). Nevertheless, it is important to state that the same efficiency of cell lysis was reached within four hours after phage infection under dynamic and static conditions.

Biofilm formation is directly related to the supply of nutrients [48–52]. In this work, P. fluorescens biofilm formation under non-renewed media conditions was the worst and least effective method for producing biofilms (Fig. 1). This lower ability of forming biofilms might be due to depletion in nutrients available for the sessile bacterial cells, which were consumed by the planktonic cells rendering difficult the multiplication of the biofilm bacteria. Cerca et al. [53] observed also this enhanced biofilm formation under fed-batch (nutrient renewal) conditions in comparison to batch (without nutrient renewal) formation of S. epidermidis biofilms. The efficiency to remove biofilms by phages is decreased in biofilms where a change of the medium was not performed. There may be various reasons, including a decreased number of daughter phages and longer phage development cycles in starving bacteria [32, 54], but also less efficient phage adsorption.

Biofilms are composed of pores and channels [55] through which nutrients reach cells present on different layers. It may be also assumed that phages are able to circulate through these channels and pores and by this way reach and adsorb to cells on different biofilm layers, including the basal layer of the biofilm. This study shows that phage application to biofilms resulted in a release of cells to the planktonic phase. This is most likely due to the infection of cells at different layers which causes the sloughing off of parts of biofilms to the liquid medium. After the release of these biofilm clusters to the planktonic phase, the detached biofilm cells are most likely attacked by phages present on the liquid medium as in all situations the number of cells detectable on the planktonic phase was always bellow 103 cells ml-1.

It has been reported that phage aggregation and fixation on surfaces is a mechanism of protection that phages adopt as a strategy of survival from inactivating environmental stresses [55–58]. In this work it is shown that phage ϕIBB-PF7A in fact adsorbs to stainless steel and phages are found individually or in aggregates (Fig. 5). Phage adsorption was clearly dependent on the infection conditions applied. Static conditions allow the deposition of phages while dynamic conditions suppress phage fixation.

Coexistence of phages and bacteria has frequently been reported and discussed in relation to bacterial resistance of the bacteria to the phages as well as a consequent mutation of phages [59]. In this work, phage action on the biofilms formed was studied merely for 4 h which was not a period long enough for the emergence of resistance. Possibly longer periods of phage action on the biofilms would result in the appearance of phage resistant bacteria.

Tail et al. [39] has obtained complete eradication of 24 h biofilms of E. cloacae when exposing the biofilms during 24 h to a solution of 3 different phages. Curtin and Donlan [31] have adopted a different approach of phage application in order to combat S. epidermidis biofilm formation onto catheters. Instead of treating biofilms once they were already present, these authors have adopted pre-treatment of catheter surfaces with phages to decrease bacteria adhesion to the surface. In food industry, pre-treatment of all surfaces is more complicated, so the combination of phages in a cocktail to achieve biofilm eradication is more realistic. Furthermore, there might be attractive scenarios where phage sanitation is applied before or with chemical biocides, which may make sanitation more efficient and therefore decreasing the necessary amount of chemicals.

Phages have been suggested as sanitation agents for different bacteria present in food products and industrial facilities [27–30, 55]. For instance, LISTEX™P100 from EBI Food Safety and LMP-102 from Intralytix were both approved in 2006 by the FDA to combat Listeria monocytogenes present in foods and to eliminate L. monocytogenes from industrial surfaces. The phage used in this study, ϕIBB-PF7A, is an interesting biological agent as it has a great ability of lysing biofilm cells in an exceptionally rapid time.

Conclusion

Phage Ï•IBB-PF7A may prove to be useful for the biocontrol of P. fluorescens strains in dairy and other food related industries. In laboratory studies it was highly efficient in reducing the number of cells present even in mature P. fluorescens biofilms, formed under different conditions, which persuades us to continue further biofilm and phage studies including studies with mixed biofilm communities.

Methods

Bacteria and growth conditions

P. fluorescens was isolated from a Portuguese dairy plant located in Paços de Ferreira and grown at 30°C in Tryptic Soy Broth (TSB, Fluka). Solid TSA medium contained 1.2% w/v of Bacto™ agar (Difco) and the soft agar top-layer contained 0.6% of Bacto™ agar. All bacteria were subcultured once and glycerol stocks were done and stored frozen at -80°C until further use.

Bacteriophage isolation

Bacteriophage Ï•IBB-PF7A was isolated from a sewage treatment plant in Esposende (ETAR de Esposende, Portugal). This phage was chosen amongst different P. fluorescens phages isolated as it was able to infect a higher number of P. fluorescens isolated from a dairy industry [40].

Bacteriophage propagation and concentration

Concentrated phage solutions were produced using the plate lysis and elution method as described by Sambrook & Russel [60] with some modifications. Briefly, a top agar was prepared containing 1 ml of phage solution and 1 ml of a bacterial overnight culture in 30 ml of soft-agar. This agar was added to 250 mL T-flasks with a thin bottom layer of TSA. After solidification of the top agar layer the T-flasks were incubated at 30°C overnight. Afterwards, the flasks were eluted with SM buffer and the phage lysate was first concentrated with PEG 8000 and then purified with chloroform. Samples in SM buffer were stored at 4°C until further use.

Phage titration of stock solution

Bacteriophage titer was analysed as described by Adams [61]. Briefly, 100 μl of diluted phage solution, 100 μl of a bacterial overnight culture, and 3 ml of molten agar were mixed in a glass tube and poured into a TSA containing Petri dish. Plates were incubated for 18 h after which plaque forming units (PFU) were counted.

Biofilm formation

Biofilms were formed on stainless steel (SS) 1 × 1 cm slides for different time periods (24 h up to 168 h) according to the method described by Cerca et al. [53] with some alterations. Briefly, SS slides were placed on the wells of a 6 well microplate containing each well 6 ml of TSB medium. Bacterial culture (50 μl) with an OD600 of 1.0, which corresponds to approximately 1.79 × 109 cells ml-1, was added to each well and the microplate was incubated at 30°C under different conditions. Under static conditions, the 6-well microtiter plates were put in an incubator and the biofilms were formed without agitation and with a change of medium every 12 h during the whole duration of the experiment. Under dynamic conditions, the 6-well microtiter plates were put on an orbital shaker at a constant speed of 100 rpm and two different biofilm formation strategies were studied – with the change of medium every 12 h and without the change of medium. Abbreviation will be used for the different biofilm formation conditions: static conditions with media renewal every 12 h (SR), dynamic conditions with media renewal every 12 h (DR) and dynamic conditions without renewal of media (DNR).

Biofilm infection

Biofilms were allowed to form on stainless steel (SS) slides for different times and conditions in 6-well microplates. Afterwards, the SS slides with biofilm were immersed twice in fresh PBS and placed in new microplates with 3 ml of TSB and 3 ml of phage solution with a concentration of 107 PFU ml-1. The 6-well microplates were incubated at 30°C the same conditions at which the biofilms were formed. Control experiments were performed at the same conditions with the SS slides put, after immersion in PBS, in new microplate wells with 3 ml of TSB and 3 ml of SM buffer. Biofilms before and after phage infection were analyzed for number of cells (CFU counts) and phages (PFU counts) attached to the surfaces and on the planktonic phase as well through dry weight determinations (see below).

CFU and PFU counts of biofilm samples

The number of bacteria and phage present on the SS slides before and after infection of biofilms formed under different conditions was enumerated in order to estimate the efficiency and adsorption characteristics of the phage. Therefore SS slides with biofilms were washed twice by immersion in PBS and afterwards put in 50 ml tubes containing 6 ml of 0.9% saline solution. The tubes were thoroughly mixed (vortexed 4 × 30 sec) and serial dilutions were immediately performed in 0.9% saline solution for CFU counts and in SM buffer for PFU counts. For CFU counts the samples were immediately plated on TSA plates and for PFU counts samples were immediately plated using the method described above for phage titration. Six independent parallels were performed for the different countings.

CFU and PFU counts of planktonic samples

Samples for planktonic CFU and PFU counts were removed from the 6-well microtiter plates and serial dilutions were performed. All samples were immediately processed. Six independent parallels were performed for the different countings.

Biofilm dry weight determination

Biofilm dry weight determinations were performed as described by An & Friedman [62]. Briefly, stainless steel (SS) slides with biofilms formed under different conditions were removed from the microplates and rinsed by immersion in fresh PBS. Afterwards, the slides were dried at 100°C for 24 h and weighed. The SS slides were then carefully washed, dried again for 24 h at 100°C and weighed (empty control). Biofilm dry weight was calculated from the difference between these measurements. Biofilm dry weight determinations represent six independent parallels for controls (time 0 of infection) and for phage treated slides (4 h after infection).

Resistance assays

Biofilm cells that remained on the stainless steel surfaces were analysed for resistance as described by Sillankorva et al. [33] with some alterations. Briefly, swabs were used to collect the bacteria and put on tubes containing 1 ml of saline 0.9%. After, dilutions were made and plated on TSA dishes. After overnight incubation, 20 colonies from different dishes were picked and grown on flasks with 50 ml TSB medium for 10 h. Bacterial lawns of these cultures were done and tested for resistance using the spot test with the phage stock solution. The dishes were incubated for 18 h at 30°C and checked for presence of phage plaque.

Field Emission Scanning Electron Microscopy (FESEM)

Samples were taken before phage infection and after 4 h of phage infection. The SS slides were rinsed by immersion in fresh TSB media before adding 2.5% glutaraldehyde and incubation at 4°C for 1 h. Dehydration was carried out with an ethanol series from 30% to 50% to 70% to 80% to 90% and absolute, followed by critical drying (Critical Point Dryer CPD 030). Biofilms were coated with platinum coating and analyzed with FESEM in a JEOL JSM-6300F (Tokyo, Japan) instrument.

References

  1. Chandler RE, Mcmeekin TA: Temperature Function Integration and Its Relationship to the Spoilage of Pasteurized, Homogenized Milk. Australian Journal of Dairy Technology. 1985, 40: 37-40.

    Google Scholar 

  2. Cousin MA: Presence and Activity of Psychrotrophic Microorganisms in Milk and Dairy-Products – A Review. Journal of Food Protection. 1982, 45: 172-207.

    Google Scholar 

  3. Cromie S: Psychrotrophs and Their Enzyme Residues in Cheese Milk. Australian Journal of Dairy Technology. 1992, 47: 96-100.

    CAS  Google Scholar 

  4. International Dairy Federation: Heat treatment and alternative methods. 1996, Brussels, Belgium: International Dairy Federation, Ref Type: Report

    Google Scholar 

  5. McKellar RC: Enzymes of Psychrotrophs in Raw Food. 1989, CRC Press

    Google Scholar 

  6. Ogier JC, Son O, Gruss A, Tailliez P, acroix-Buchet A: Identification of the bacterial microflora in dairy products by temporal temperature gradient gel electrophoresis. Applied and Environmental Microbiology. 2002, 68: 3691-3701. 10.1128/AEM.68.8.3691-3701.2002.

    Article  CAS  Google Scholar 

  7. Dogan B, Boor KJ: Genetic diversity and spoilage potentials among Pseudomonas spp. isolated from fluid milk products and dairy processing plants. Applied and Environmental Microbiology. 2003, 69: 130-138. 10.1128/AEM.69.1.130-138.2003.

    Article  CAS  Google Scholar 

  8. Ogier JC, Son O, Gruss A, Tailliez P, acroix-Buchet A: Identification of the bacterial microflora in dairy products by temporal temperature gradient gel electrophoresis. Applied and Environmental Microbiology. 2002, 68: 3691-3701. 10.1128/AEM.68.8.3691-3701.2002.

    Article  CAS  Google Scholar 

  9. Sorhaug T, Stepaniak L: Psychrotrophs and their enzymes in milk and dairy products: Quality aspects. Trends in Food Science & Technology. 1997, 8: 35-41. 10.1016/S0924-2244(97)01006-6.

    Article  CAS  Google Scholar 

  10. Arnaut-Rollier I, Vauterin L, De Vos P, Massart DL, Devriese LA, De Zutter L, Van Hoof J: A numerical taxonomic study of the Pseudomonas flora isolated from poultry meat. Journal of Applied Microbiology. 1999, 87: 15-28. 10.1046/j.1365-2672.1999.00785.x.

    Article  CAS  Google Scholar 

  11. Kirsch RH, Berry FE, Baldwin CL, Foster EM: The Bacteriology of Refrigerated Ground Beef. Food Research. 1952, 17: 495-503.

    Article  Google Scholar 

  12. Molin G, Ternstrom A: Numerical Taxonomy of Psychrotrophic Pseudomonads. Journal of General Microbiology. 1982, 128: 1249-1264.

    CAS  Google Scholar 

  13. Molin G, Ternstrom A: Phenotypically Based Taxonomy of Psychrotrophic Pseudomonas Isolated from Spoiled Meat, Water, and Soil. International Journal of Systematic Bacteriology. 1986, 36: 257-274.

    Article  Google Scholar 

  14. Carpentier B, Chassaing D: Interactions in biofilms between Listeria monocytogenes and resident microorganisms from food industry premises. International Journal of Food Microbiology. 2004, 97: 111-122. 10.1016/j.ijfoodmicro.2004.03.031.

    Article  CAS  Google Scholar 

  15. Leriche V: Minimisation de l'implantation de Listeria monocytogenes sur les surfaces des ateliers alimentaires par la création et l'entretien de biofilms. 1999, Université de Bourgogne, Dijon, France

    Google Scholar 

  16. Delaquis PJ, McCurdy AR: Colonization of Beef Muscle Surfaces by Pseudomonas fluorescens and Pseudomonas fragi. Journal of Food Science. 1990, 55: 898-10.1111/j.1365-2621.1990.tb01560.x.

    Article  Google Scholar 

  17. Farrag SA, Marth EH: Behavior of Listeria monocytogenes When Incubated Together with Pseudomonas Species in Tryptose Broth at 7-Degrees-C and 13-Degrees-C. Journal of Food Protection. 1989, 52: 536-539.

    Google Scholar 

  18. Marshall DL, Wieselehigh PL, Wells JH, Farr AJ: Comparative Growth of Listeria monocytogenes and Pseudomonas fluorescens on Precooked Chicken Nuggets Stored Under Modified Atmospheres. Journal of Food Protection. 1991, 54: 841-

    Google Scholar 

  19. Brading MG, Boyle J, Lappinscott HM: Biofilm Formation in Laminar-Flow Using Pseudomonas fluorescens Ex101. Journal of Industrial Microbiology. 1995, 15: 297-304. 10.1007/BF01569983.

    Article  CAS  Google Scholar 

  20. Simões M, Carvalho H, Pereira MO, Vieira MJ: Studies on the behaviour of Pseudomonas fluorescens biofilms after ortho-phthalaldehyde treatment. Biofouling. 2003, 19: 151-157.

    Article  Google Scholar 

  21. Simões M, Pereira MO, Vieira MJ: Action of a cationic surfactant on the activity and removal of bacterial biofilms formed under different flow regimes. Water Research. 2005, 39: 478-486. 10.1016/j.watres.2004.09.018.

    Article  Google Scholar 

  22. Atterbury RJ, Connerton PL, Dodd CER, Rees CED, Connerton IF: Application of host-specific bacteriophages to the surface of chicken skin leads to a reduction in recovery of Campylobacter jejuni. Applied and Environmental Microbiology. 2003, 69: 6302-6306. 10.1128/AEM.69.10.6302-6306.2003.

    Article  CAS  Google Scholar 

  23. Goode D, Allen VM, Barrow PA: Reduction of experimental Salmonella and Campylobacter contamination of chicken skin by application of lytic bacteriophages. Applied and Environmental Microbiology. 2003, 69: 5032-5036. 10.1128/AEM.69.8.5032-5036.2003.

    Article  CAS  Google Scholar 

  24. Raya RR, Varey P, Oot RA, Dyen MR, Callaway TR, Edrington TS, Kutter EM, Brabban AD: Isolation and characterization of a new T-even bacteriophage, CEV1, and determination of its potential to reduce Escherichia coli O157 : H7 levels in sheep. Applied and Environmental Microbiology. 2006, 72: 6405-6410. 10.1128/AEM.03011-05.

    Article  CAS  Google Scholar 

  25. Wagenaar JA, van Bergen MAP, Mueller MA, Wassenaar TM, Carlton RA: Phage therapy reduces Campylobacter jejuni colonization in broilers. Veterinary Microbiology. 2005, 109: 275-283. 10.1016/j.vetmic.2005.06.002.

    Article  Google Scholar 

  26. FDA: Food additives permitted for direct addition to food for human consumption; Bacteriophage preparation. Federal Register: Rules and Regulations 71[160]. 18-8-2006. Ref Type: Report

  27. Loessner M, Carlton RM: Virulent phages to control Listeria monocytogenes in foodstuffs and in food processing plants. [US 2005/0175594 A1]. 2005, Ref Type: Patent

    Google Scholar 

  28. Breeuwer P, Boissin-Delaponte C, Joosten H, Lardeau A: Isolated phages and their use as disinfectants in food or for sanitation of factory environments. [EP 1533369 A1]. 2005, Ref Type: Patent

    Google Scholar 

  29. Jones CR, Rennie GK, Moore CH: Use of viruses against undesirable microorganisms. [EP 0414304 A2]. 1991, Ref Type: Patent

    Google Scholar 

  30. Sulakvelidze A, Morris JG, Alavidze Z, Pasternack GR, Brown TC: Method and device for sanitation using bacteriophages. [US 2004/0029250 A1]. 2004, Ref Type: Patent

    Google Scholar 

  31. Curtin JJ, Donlan RM: Using bacteriophages to reduce formation of catheter-associated biofilms by Staphylococcus epidermidis. Antimicrobial Agents and Chemotherapy. 2006, 50: 1268-1275. 10.1128/AAC.50.4.1268-1275.2006.

    Article  CAS  Google Scholar 

  32. Los M, Golec P, Los JM, Weglewska-Jurkiewicz A, Czyz A, Wegrzyn A, Wegrzyn G, Neubauer P: Effective inhibition of lytic development of bacteriophages lambda, P1 and T4 by starvation of their host, Escherichia coli. Bmc Biotechnology. 2007, 7:

    Google Scholar 

  33. Sillankorva S, Oliveira R, Vieira MJ, Sutherland I, Azeredo J: Pseudomonas fluorescens infection by bacteriophage phiS1: the influence of temperature, host growth phase and media. Fems Microbiology Letters. 2004, 241: 13-20. 10.1016/j.femsle.2004.06.058.

    Article  CAS  Google Scholar 

  34. Cerca N, Oliveira R, Azeredo J: Susceptibility of Staphylococcus epidermidis planktonic cells and biofilms to the lytic action of staphylococcus bacteriophage K. Letters in Applied Microbiology. 2007, 45: 313-317. 10.1111/j.1472-765X.2007.02190.x.

    Article  CAS  Google Scholar 

  35. Doolittle MM, Cooney JJ, Caldwell DE: Lytic Infection of Escherichia coli Biofilms by Bacteriophage-T4. Canadian Journal of Microbiology. 1995, 41: 12-18.

    Article  CAS  Google Scholar 

  36. Doolittle MM, Cooney JJ, Caldwell DE: Tracing the interaction of bacteriophage with bacterial biofilms using fluorescent and chromogenic probes. Journal of Industrial Microbiology. 1996, 16: 331-341. 10.1007/BF01570111.

    Article  CAS  Google Scholar 

  37. Hughes KA, Sutherland IW, Jones MV: Biofilm susceptibility to bacteriophage attack: the role of phage-borne polysaccharide depolymerase. Microbiology-Sgm. 1998, 144: 3039-3047.

    Article  CAS  Google Scholar 

  38. Sillankorva S, Oliveira R, Vieira MJ, Sutherland IW, Azeredo J: Bacteriophage phiS1 infection of Pseudomonas fluorescens planktonic cells versus biofilms. Biofouling. 2004, 20: 133-138. 10.1080/08927010410001723834.

    Article  Google Scholar 

  39. Tait K, Skillman LC, Sutherland IW: The efficacy of bacteriophage as a method of biofilm eradication. Biofouling. 2002, 18: 305-311. 10.1080/0892701021000034418.

    Article  Google Scholar 

  40. Sillankorva S, Neubauer P, Azeredo J: Isolation and characterization of a T7-like lytic phage for Pseudomonas fluorescens. Bmc Biotechnology. 2008, 8: 80-10.1186/1472-6750-8-59.

    Article  Google Scholar 

  41. Hanlon GW, Denyer SP, Olliff CJ, Ibrahim LJ: Reduction in exopolysaccharide viscosity as an aid to bacteriophage penetration through Pseudomonas aeruginosa biofilms. Applied and Environmental Microbiology. 2001, 67: 2746-2753. 10.1128/AEM.67.6.2746-2753.2001.

    Article  CAS  Google Scholar 

  42. Lu TK, Collins JJ: Dispersing biofilms with engineered enzymatic bacteriophage. Proceedings of the National Academy of Sciences of the United States of America. 2007, 104: 11197-11202. 10.1073/pnas.0704624104.

    Article  CAS  Google Scholar 

  43. Ryu JH, Beuchat LR: Biofilm formation by Escherichia coli O157 : H7 on stainless steel: Effect of exopolysaccharide and curli production on its resistance to chlorine. Applied and Environmental Microbiology. 2005, 71: 247-254. 10.1128/AEM.71.1.247-254.2005.

    Article  CAS  Google Scholar 

  44. Sillankorva S, Oliveira R, Vieira MJ, Azeredo J: Real-time quantification of Pseudomonas fluorescens cell removal from glass surfaces due to bacteriophage phiS1 application. Journal of Applied Microbiology. 2008

    Google Scholar 

  45. Heydorn A, Nielsen AT, Hentzer M, Sternberg C, Givskov M, Ersboll BK, Molin S: Quantification of biofilm structures by the novel computer program COMSTAT. Microbiology-Uk. 2000, 146: 2395-2407.

    Article  CAS  Google Scholar 

  46. Werner E, Roe F, Bugnicourt A, Franklin MJ, Heydorn A, Molin S, Pitts B, Stewart PS: Stratified growth in Pseudomonas aeruginosa biofilms. Applied and Environmental Microbiology. 2004, 70: 6188-6196. 10.1128/AEM.70.10.6188-6196.2004.

    Article  CAS  Google Scholar 

  47. Wright JB, Costerton JW, Mccoy WF: Filamentous Growth of Pseudomonas aeruginosa. Journal of Industrial Microbiology. 1988, 3: 139-146. 10.1007/BF01569520.

    Article  Google Scholar 

  48. Bott TR, Miller PC: Mechanisms of Biofilm Formation on Aluminum Tubes. Journal of Chemical Technology and Biotechnology B-Biotechnology. 1983, 33: 177-184.

    Article  Google Scholar 

  49. Melo LF, Vieira MJ: Physical stability and biological activity of biofilms under turbulent flow and low substrate concentration. Bioprocess Engineering. 1999, 20: 363-368. 10.1007/s004490050604.

    Article  CAS  Google Scholar 

  50. Miller PC, Bott TR: Effects of Biocide and Nutrient Availability on Microbial-Contamination of Surfaces in Cooling-Water Systems. Journal of Chemical Technology and Biotechnology. 1982, 32: 538-546.

    Article  CAS  Google Scholar 

  51. Trulear MG, Characklis WG: Dynamics of Biofilm Processes. Journal Water Pollution Control Federation. 1982, 54: 1288-1301.

    CAS  Google Scholar 

  52. Patel TD: Film structure and composition in biofouling systems. 1995, University of Birmingham, England

    Google Scholar 

  53. Cerca N, Pier GB, Vilanova M, Oliveira R, Azeredo J: Influence of batch or fed-batch growth on Staphylococcus epidermidis biofilm formation. Letters in Applied Microbiology. 2004, 39: 420-424. 10.1111/j.1472-765X.2004.01601.x.

    Article  CAS  Google Scholar 

  54. Neubauer P, Mathiszik B, Los M: Simulation tool for estimation of optimal bacterial growth rate to reduce effects caused by bacteriophages. Modern Bacteriophage Biology and Biotechnology. Edited by: Wegrzyn A. 2006, Fort P.O., Trivandrum-695 023, Kerala, India: Research Signpost, 37/661 (2): 153-164.

  55. Lawrence JR, Korber DR, Hoyle BD, Costerton JW, Caldwell DE: Optical sectioning of microbial biofilms. Journal of Bacteriology. 1991, 173: 6558-6567.

    CAS  Google Scholar 

  56. Briandet R, Lacroix-Gueu P, Renault M, Lecart S, Meylheuc T, Bidnenko E, Steenkeste K, Bellon-Fontaine MN, Fontaine-Aupart MP: Diffusion-reaction of bacteriophages inside biofilms: a dynamic approach using fluorescence correlation spectroscopy. Applied and Environmental Microbiology. 2008

    Google Scholar 

  57. Stotzky G, Rem LT: Influence of clay minerals on microorganisms. I. Montmorillonite and kaolinite on bacteria. Canadian Journal of Microbiology. 1966, 12: 547-563.

    Article  CAS  Google Scholar 

  58. Stotzky G: Influence of clay minerals on microorganisms. III. Effect of particle size, catiation exchange capacity and surface area on bacteria. Canadian Journal of Microbiology. 1966, 12: 1235-1246.

    Article  CAS  Google Scholar 

  59. Balakshina VV, Kulakov LA, Boronin AM: Dynamics of the Interaction of Bacteriophage Phi-Mf81 with Its Host, Pseudomonas aeruginosa. Microbiology. 1992, 61: 741-744.

    Google Scholar 

  60. Sambrook J, Russell DW: Molecular Cloning: A Laboratory Manual. 2001, New York: Cold Spring Harbor Laboratory Press, Cold Spring Harbor

    Google Scholar 

  61. Adams MH: Bacteriophages. 1959, New York: Interscience Publishers

    Google Scholar 

  62. An YH, Friedman RJ: Laboratory methods for studies of bacterial adhesion. Journal of Microbiological Methods. 1997, 30: 141-152. 10.1016/S0167-7012(97)00058-4.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors thank Dr. Maria João Vieira for generously providing the bacteria for this study, Zélia Fernandes for providing sewage samples from the wastewater treatment plant of Esposende. This work was supported by a grant (SFRH/BD/18485/2004) from the Portuguese Foundation for Science and Technology (FCT).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Joana Azeredo.

Additional information

Authors' contributions

SS performed all practical experimental work and wrote the manuscript. PN contributed with his experiences in phage cultivation and JA with her competence in biofilm control. JA and PN supervised the work. The final manuscript was read and accepted by all co-authors.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Sillankorva, S., Neubauer, P. & Azeredo, J. Pseudomonas fluorescens biofilms subjected to phage phiIBB-PF7A. BMC Biotechnol 8, 79 (2008). https://doi.org/10.1186/1472-6750-8-79

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1472-6750-8-79

Keywords