Skip to main content
  • Methodology article
  • Open access
  • Published:

Directional cloning of DNA fragments using deoxyinosine-containing oligonucleotides and endonuclease V

Abstract

Background

DNA fragments carrying internal recognition sites for the restriction endonucleases intended for cloning into a target plasmid pose a challenge for conventional cloning.

Results

A method for directional insertion of DNA fragments into plasmid vectors has been developed. The target sequence is amplified from a template DNA sample by PCR using two oligonucleotides each containing a single deoxyinosine base at the third position from the 5′ end. Treatment of such PCR products with endonuclease V generates 3′ protruding ends suitable for ligation with vector fragments created by conventional restriction endonuclease reactions.

Conclusions

The developed approach generates terminal cohesive ends without the use of Type II restriction endonucleases, and is thus independent from the DNA sequence. Due to PCR amplification, minimal amounts of template DNA are required. Using the robust Taq enzyme or a proofreading Pfu DNA polymerase mutant, the method is applicable to a broad range of insert sequences. Appropriate primer design enables direct incorporation of terminal DNA sequence modifications such as tag addition, insertions, deletions and mutations into the cloning strategy. Further, the restriction sites of the target plasmid can be either retained or removed.

Background

With hundreds of enzymes commercially available today [1], restriction endonuclease treatment of insert and plasmid vector DNA followed by ligation and transformation into competent E. coli strains presents the standard cloning method in molecular biology. Given the advances in structural biology and the advent of synthetic biology, a strong demand exists to transfer and rearrange a large variety of DNA fragments from different genetic sources in a directed manner. A diverse catalogue of plasmid vectors is at hand for propagation in pro- and eukaryotic cells, enabling heterologous protein expression in various host organisms. Frequently, suitable pairs of Type II restriction enzymes with unique recognition sites in the vector and insert DNA fragments can be found, especially since the latter are easily produced via PCR. In such a case, the PCR primers contain add-on tails composed of the restriction endonuclease recognition sequence and additional nucleotides which ensure efficient enzymatic processing [2]. Especially with an increasing size of the insert, however, the chance rises that it contains a recognition site of the desired restriction enzymes. Statistically, the 6 bp recognition sequence of a Type II restriction enzyme such as XbaI would occur once in every 46 / 2 = 2048 base pairs. The situation gets worse if one aims to insert multiple sequences in dual-expression vectors, as for instance required for co-expression studies in metabolic engineering, structural and synthetic biology [3–6]. These circumstances require purchase and storage of numerous restriction enzymes or the execution of site-directed mutagenesis (including design and synthesis/purchase of mutagenic primers, high-fidelity PCR, transformation and sequencing) [7, 8] in order to remove the unwanted recognition sites. Individual buffer and temperature requirements for endonuclease stability and activity [9] further limit the number of cloning options.

To eliminate the problems of conventional cloning, methods avoiding the use of Type II restriction enzymes have been developed. The Gateway cloning system relies on site-specific recombination catalyzed by a proprietary bacteriophage λ protein formulation in vitro[10]. Creation of large recombinant DNA molecules can be achieved by the domino method [11] and DNA assembler [12], which are based on homologous recombination in vivo by the machinery of B. subtilis or S. cerevisiae, respectively. The endogenous recombination system of E. coli can combine insert and vector molecules upon co-transfection [13, 14], which can be facilitated by expression of a homing endonuclease and bacteriophage recombinases [15]. Similarly, a cell lysate which contains a prophage recombination system can be used in vitro[16]. PCR-based generation of complete recombinant plasmids, preferably via a proofreading DNA polymerase, can be achieved by several strategies [17–21]. For the highly complex challenge of genome engineering, homing nucleases [22], transcription activator like (TAL) [23] and zinc-finger nucleases [24] can be used.

More similar to the conventional restriction-ligation system, compatible cohesive ends can be generated in alternative ways. Combined with a subsequent ligation reaction that stabilizes the paired ends, exonuclease III [25] or T4 DNA polymerase [26] can be used for their creation. Ligation-independent cloning (LIC) [27] employs longer overhangs resulting in sufficiently stable DNA base pairing for transformation. These can be created by several means, e.g. via T4 DNA polymerase or incomplete PCR [27–29], hybridization of PCR products [30], ribonucleotide-containing primers [31], terminal transferase [32], abasic sites [33], chemical or enzymatic cleavage of phosphorothioated DNA [34, 35], or λ exonuclease [36]. Elegant enzyme-based in vitro systems have been developed, such as In-Fusion cloning [37], for which the polymerase is known but not the exact composition, as well as the combined isothermal usage of a DNA polymerase, a 5′ exonuclease and DNA ligase, named Gibson assembly cloning [38]. Although several of the described cloning systems with individual advantages and disadvantages are commercially available, many present costly alternatives or demand complex planning.

Smith et al. reported a method to create insert fragments with 5′ recessed ends via PCR, utilizing deoxyuracil-containing primers [39]. Treatment of the PCR products with heat or alkaline solution creates 3′ overhangs compatible with those of the vector fragment. In a similar fashion, USER friendly DNA cloning [40] utilizes a commercially available enzyme mix. In contrast to uracil DNA glycosylase (UDG) treatment, this enzyme mix removes the dU residues instead of cleaving the N-glycosylic bond. Compatible vectors are generated by treating the plasmid DNA with a nicking and a Type II restriction endonuclease instead of PCR-based amplification. As for other methods, this strategy avoids the risk of introducing polymerase errors into the plasmid backbone. Although cohesive ends can also be generated by using DNA glycosylase-lyase Endo VIII [41] or Endo IV [42] subsequent to UDG, we sought to develop a more straightforward cloning method that requires only one enzyme, no heat- or alkaline treatment and which allows the creation of more 3′ protruding end combinations (see Figure 1 for those created in this study).

Figure 1
figure 1

Cohesive dsDNA ends created in this study. In order to ligate insert DNA fragments efficiently with a linearized target plasmid vector, both molecules have to carry compatible cohesive ends. For the vector DNA, 5′ recessed ends are created by conventional restriction enzyme treatment. Names and recognition sequences of the enzymes used in this study are listed. For other enzymes, please refer to REBASE [60]. Endonucleolytic cleavage positions are depicted as vertical dashes. Insert DNA fragments with compatible cohesive ends are created by PCR and subsequent endonuclease V treatment (as illustrated in Figure 2). The 5′ ends of the PCR primers and the termini of the corresponding PCR products differ from the shown sequences: They lack the first nucleotide (shown in red) and carry deoxyinosine instead of the residue shown in orange. EndoV treatment of the PCR product results in 5′ recessed ends shown in bold letters with yellow background. If the residue highlighted in grey is omitted from the oligonucleotide design, ligation of the insert fragments with linearized plasmid DNA does not reconstitute the restriction enzyme site.

Unlike deoxyuracil, the universal base deoxyinosine (dI) can pair with all four canonical DNA nucleobases following a duplex stability series of I:C > I:A > I:T≈I:G [43]. In contrast to several proofreading polymerases [44], Taq polymerase can incorporate dITP during primer extension and readily extends dI-containing DNA. These properties allow deoxyinosine usage for the creation of degenerate primers [45, 46] as well as for random [47] and sequence saturation mutagenesis [48].

With deoxyinosine-containing oligonucleotides and endonuclease V (EndoV) readily available from commercial suppliers, a method was developed to create terminal 3′ protruding ends independent of the insert DNA sequence (Figure 2). Appropriate positioning of dI in the primer sequence enables the directional insertion of DNA fragments into plasmid vectors by PCR, endonuclease V treatment and ligation. In order to avoid the introduction of polymerase errors, linearized vectors are created using conventional restriction endonucleases. The applicability of the system is demonstrated by successful cloning of three different coding sequences into several plasmid vectors with efficiencies matching or exceeding those of alternative approaches.

Figure 2
figure 2

Scheme for the generation of cohesive ends. In addition to regions complementary to the insert DNA sequence (1), oligonucleotides are designed with overhangs comprising the 4 bp cohesive part of a restriction site combined with deoxyinosine (dI) at the third position from the 5′ end. Primer annealing and extension during a PCR leads to amplification of the desired target fragment (2), which carries the dI residues (bold, orange) in its termini. The pairing properties of the universal base will generate a sequence distribution at the corresponding site of the opposing strand (indicated as 'N’). Purified PCR products are treated with EndoV, which cleaves the second phosphodiester bond 3′ to dI (3). The target DNA fragment (4) is obtained by spin column-based or agarose gel purification, respectively, removing the weakly bound residues of ssDNA. Carrying cohesive ends with 5′ phosphates, the insert fragment is now suitable for ligation to vector DNA fragments created by conventional restriction enzyme treatment (in the depicted case SacI and KpnI).

Results and discussion

Non-directional ampicillin resistance cassette cloning

In order to establish the proof of concept, the oligonucleotides pUCamp_f and pUCamp_r (Table 1) were designed for the amplification of a 1114 bp region from plasmid pUC18. Insertion of this DNA sequence into a different plasmid vector was expected to confer ampicillin resistance to transformed E. coli cells, allowing straightforward detection of recombinant clones. The target sequence includes the P3 promoter [49], the ribosome binding site, the β-lactamase (bla) coding region and the terminal TAA stop codon. Both oligonucleotides were designed to form primer-template duplexes with Tm values of 56–57°C. In order to enable cloning, the 5′ primer ends comprise four additional nucleotides with a deoxyinosine residue at the third position (compare Figure 1). According to previous reports and the crystal structure of the Thermotoga maritima (Tma) enzyme [50], treatment of the PCR products with endonuclease V was expected to result in hydrolysis of the second phosphodiester bond 3′ to dI [51]. Removal of the weakly bound 4 bp ssDNA stretch creates cohesive ends compatible with those generated by the restriction enzyme KpnI. Figure 2 illustrates a similar case of cohesive end creation, whereas the design of the forward primer results in an overhang compatible with that of a different Type II restriction enzyme (see Figure 1 for all cohesive ends created in this study). It should be noted that the base-pairing properties of dI [43] will generate a sequence distribution at the corresponding position on the opposing strand of the PCR-generated dsDNA, which is discussed in the Conclusions section.

Table 1 Oligonucleotide sequences

With the two synthetic oligonucleotides, PCR was conducted using Taq DNA polymerase and a total of 27 amplification cycles. Subsequent to DNA purification, endonuclease V treatment and preparative agarose gel electrophoresis were performed. Ligation reactions were prepared with KpnI-digested and dephosphorylated pIRES2-EGFP or pSB1C3, respectively. Next, competent E. coli XL-1 Blue cells were transformed. After overnight incubation at 37°C, clones were found to grow on LB agar plates supplemented with ampicillin in addition to either kanamycin or chloramphenicol, respectively. Accordingly, the insert DNA was successfully integrated into the vector backbone and the amplified antibiotic resistance cassette (AmpR) was functional in vivo.

PCR was repeated with an annealing temperature gradient spanning Tm ± 3°C. As shown in Figure 3A, products of the expected size were formed in all cases with comparable quantities. Other, non-specific bands were not detected. Consequently, the presence of the dI-containing overhang did not hinder binding of the primers to the complementary plasmid DNA. This is consistent with earlier studies [52]. To test whether E. coli colonies can serve as a direct source for the target DNA, colony PCR was performed using XL-1 Blue cells transformed with the template plasmid. Cycling and reaction conditions were kept identical except for the initial denaturation, which was extended to 3 min to facilitate cell disruption and DNA release. Figure 3B shows that specific PCR products undistinguishable from those created by amplification from plasmid DNA were formed.

Figure 3
figure 3

Robust PCR-amplification of insert DNA fragments using deoxyinosine-containing primers. Analytical agarose gel electrophoresis of PCR products produced by Taq polymerase using either plasmid DNA (A) or E. coli colonies (B) as template material. Relative to the calculated Tm, annealing temperatures used for PCR cycling are indicated for each lane.

While simple co-transfection of vector and insert DNA fragments, each with large homologous regions (> 10 bp) at both ends, can create recombinant plasmids [13, 14], we found no recombinant clones when the endonuclease V treatment of the insert DNA was omitted. Ligation reactions performed with only insert or vector DNA, respectively, also did not yield ampicillin-resistant clones.

Directional cloning of a RFP reporter device

Since functional selection for the insertion of the ampicillin resistance cassette into plasmid vectors (previous chapter) did not yield information about the background of erroneous, empty or incomplete ligation events, a screening method for positive clones was employed. The red fluorescent protein (RFP) coding device BioBrick BBa_J04450 was chosen since mRFP1 expression by E. coli is easily detected [53]. Primers RFP-dev_f and RFP-dev_r (Table 1) were used to amplify an 830 bp region which comprises the E. coli lactose (lac) operon promoter including CAP and RNA polymerase binding sites, a ribosome binding site and a coding region for mRFP1 followed by a double TAA stop codon. The Tm value of the primer-template duplexes was 53–55°C. A total of 31 cycles were used for Taq polymerase-based amplification. After treatment with 5 u of Tma endonuclease V, a ligation reaction with dephosphorylated pUC19 digested with AatII and PstI was set up using a molar insert to vector ratio of 7:1. Transformation of E. coli XL-1 Blue yielded 252 colonies, of which 233 were classified as RFP-positive by manual counting (see Figure 4). Five apparently RFP-negative clones were used to inoculate 5 mL LB medium containing 100 μg/mL ampicillin. After overnight incubation at 37°C and 200 rpm, the liquid cultures possessed no or only slightly red color, respectively. DNA sequencing revealed that all clones carried an RFP coding device insert. Evidently, the observed low or missing red fluorescence was caused by point mutations or single base pair deletions in the mRFP1 coding sequence. Given the high number of PCR cycles used to produce the insert DNA fragment, this outcome was not unexpected. Assuming a constant amplification fidelity, the range of reported Taq polymerase error rates of 8 × 10-6 - 2 × 10-4 [54, 55] corresponds to a fraction of 25.7 - 100% PCR products with one or more base substitutions. In addition, plasmid DNA from seven fluorescent clones was sequenced. One clone carried two mutations of which one was silent; another clone carried one silent mutation. Five clones were free of mutations in the mRFP1 coding region. This corresponds to a total error rate of about 6 × 10-4, which fits the expected range (see above). Based on the frequency of RFP-positive clones, the efficiency of RFP-device insertion into the plasmid vector was ≥ 92.4%.

Figure 4
figure 4

mRFP1-positive clones obtained by cloning an RFP-coding device into pUC19. Recombinant E. coli colonies expressing mRFP1. Detection was facilitated via excitation at 505 nm. Manual counting yielded a positive fraction (dark blue markers) of about 92.4% (233 of 252 colonies), cyan markers present negative colonies with poor or no fluorescence.

Directional cloning of an eukaryotic coding sequence

To further explore the capabilities and limits of the cloning method, we chose to amplify the coding region of the Mus musculus microphthalmia-associated transcription factor (Mitf). The oligonucleotides MITF_f and MITF_r (Table 1) were designed for the amplification of a 1270 bp DNA fragment. The regions complementary to the template molecule were 24 or 21 bp in length, respectively, and a TGA stop codon was introduced via an overhang in the reverse primer. The oligonucleotide design was set up for the generation of cohesive ends corresponding to those created by the restriction enzymes SacI and KpnI as shown in Figure 2. It should be noted that with two internal SacI and one internal KpnI recognition sites, this DNA fragment cannot be cloned accordingly into the multiple cloning site of the vector using the conventional restriction-ligation strategy. The cycle number for Taq-based PCR was decreased to 19 in order to reduce the reaction time and the frequency of PCR errors. Following treatment with 5 u E. coli endonuclease V, purified insert DNA fragments were used in five- or 10-fold molar ratios relative to digested and dephosphorylated pBluescript II KS(+). Competent E. coli XL-1 Blue and BL21 strains were used for transformation of the ligation reactions. The five-fold molar excess of insert DNA fragments yielded 137 or 444 colonies, respectively, while the 10-fold excess yielded 83 or 456 colonies, respectively. Consequently, no profound differences were observed from the two different ratios of insert to vector molecules used in the individual ligation reactions. In order to detect the fraction of clones carrying the Mitf target DNA fragment inserted into pBluescript II KS(+) in correct orientation, a colony PCR assay was performed with colonies of both strains. Oligonucleotides Mitf-FL_f and VR2_r (Table 1) were used, with the first being complementary to the insert DNA sequence and the second to the vector backbone in reverse direction relative to the expected insert orientation. All 19 colonies tested were positive (data not shown), indicating the presence of the Mitf coding sequence inside the target plasmid in correct orientation. DNA sequencing of five additional randomly picked clones was performed, each using flanking forward and reverse primers. One clone showed a large plasmid backbone deletion of approximately 1.9 kb. The remaining four clones carried correct junction sites and the expected insert. Despite the relatively large amplicon size for a Taq-based PCR, two clones had full-length inserts free of mutations. The cloned Mitf coding sequence of the other two clones had two or four mutations, respectively.

High fidelity cloning

Although robust, primer extension reactions using Taq DNA polymerase suffer from relatively low fidelity of the enzyme, restricting the cloning of DNA fragments to a maximum length of about 1.5 kb. As shown by Eckert and Kunkel, improvements in fidelity can be reached by optimization of the PCR conditions [54].

Cloning of even larger DNA fragments demands the use of a DNA polymerase with proofreading capability, thus 3′-5′ exonuclease activity. Several polymerases of archeal origin were reported to be unable to amplify deaminated nucleotides efficiently [56]. We found the enzymes Q5 (formulated with or without an aptamer-based inhibitor for hot start functionality), Phusion, PfuUltra II and Deep VentR failing to amplify DNA fragments when dI-containing oligonucleotide primers were used (data not shown).

However, with PfuTurbo C x Hotstart, one exception was found. This Pfu DNA polymerase mutant was engineered to overcome uracil stalling. According to the manufacturer’s description, this enzyme possesses a fidelity equivalent to that of the wild-type protein and allows generation of PCR products exceeding a length of 6 kb [57]. While all other tested proofreading enzymes failed to generate PCR products suitable for endonuclease V-mediated cloning, all three types of recombinants (pIRES2-AmpR, pUC19-mRFP1, pBSK-Mitf) were successfully created by using the Pfu DNA polymerase mutant in place of the Taq enzyme. Without PCR optimization, comparable numbers of colonies were obtained using a molar vector to insert ratio of 1:8 (as summarized in Table 2). Ligation reactions using KpnI-linearized pIRES2-EGFP and PCR products treated with E. coli EndoV yielded 384 ampicillin-resistant colonies. Expression of mRFP1 was detected in 97 out of 113 clones, equivalent to a cloning efficiency of 85.8%. An increased molar vector to insert ratio of 1:10 yielded 170 colonies, of which 153 (90%) were fluorescent. Significantly lower in number, the origin of the 26 positive clones generated using a ratio of 1:8 without EndoV treatment remains unknown. Presumably, in vivo recombination events occurred.

Table 2 Cloning efficiencies using a proofreading DNA polymerase

The Mitf PCR product was successfully cloned into the multiple cloning site of plasmid vector pBluescript II KS(+). Transformation of ligation reactions containing only the linearized plasmid vector yielded five colonies while the addition of the EndoV-treated PCR products resulted in 997 cfu. With 816 cfu, increasing the molar insert to vector fragment ratio to 10:1 did not result in a higher number of transformants. Without EndoV treatment, transformation of the corresponding ligation reaction resulted in only 10 colonies, demonstrating that deoxyinosine 3′ endonuclease activity is a strict requirement for the cloning strategy to work. Further analysis of the recombinants using colony PCR indicated that from 39 clones, 38 carried the Mitf coding sequence in correct orientation (Figure 5). This corresponds to a cloning efficiency of 97.5%.

Figure 5
figure 5

Colony PCR screening to detect successful cloning of Mitf. Presence of the Mitf coding region inside the plasmid vector pBluescript II KS(+) in correct orientation detected by colony PCR and analytical gel electrophoresis. From 40 individually tested colonies, 39 were judged positive as evident from the amplification of a DNA fragment (expected size: 1621 bp). Colonies from the same E. coli strain transformed with plasmid DNA lacking the Mitf coding region served as negative control (NC).

To our knowledge, this study is the first to demonstrate that a Pfu DNA polymerase mutant can achieve exponential DNA amplification in PCR using two deoxyinosine-containing oligonucleotides. Gill et al. have reported that the mutant enzyme V93Q can extend duplexes with modified primers, while exponential amplification fails when dGTP is replaced by dITP [58]. Using dI-containing oligonucleotides, primer extension reactions with the wild-type enzyme were reported to fail [44, 59]. Using PfuUltra II Fusion HS, we indeed observed no exponential amplification (data not shown). Relative to Taq DNA polymerase, the mutant Pfu enzyme proved more sensitive towards high annealing temperatures. The target PCR product yield was found to be optimal when the primer annealing steps were performed at Tm - 3°C and decreased as soon as Tanneal exceeded Tm (compare Figure 6). Only in one case, nonspecific by-products were observed, namely for the ampicillin resistance cassette PCR conducted with Tanneal ≥ Tm + 3°C.

Figure 6
figure 6

Insert DNA fragment generation using a proofreading DNA polymerase. PfuTurbo C x Hotstart polymerase was used for PCR amplification of insert DNA fragments using two deoxyinosine-containing oligonucleotides. Analytical agarose gel electrophoresis was performed with PCR products comprising the ampicillin resistance cassette (1114 bp, A), the mRFP1 reporter device (830 bp, B), and the Mitf coding sequence (1270 bp, C). Annealing temperatures which were used for PCR cycling are indicated relative to Tm for each lane.

Conclusions

The developed method allows the creation of PCR fragments carrying cohesive ends compatible to those of Type II restriction endonucleases which create 4 bp 3′ overhangs, as demonstrated herein for four different restriction enzyme recognition sites. To date, 21 enzymes of this type are commercially available [60]. The key advantage of our approach is the independence of the insert DNA sequence, which can - in contrast to the conventional cloning method - internally carry the recognition sequences of the restriction enzymes used for the digestion of the target plasmid vector. Consequently, only the approximate insert length (for PCR extension time determination) and its terminal sequences (for primer design) must be known. The developed method is straightforward and requires only minimal amounts of template DNA, e.g. 1 ng plasmid DNA or a single E. coli colony, for insert generation. With sufficient amounts of target plasmid vector at hand, all cloning steps can be performed in a single day finished by overnight incubation of transformed E. coli cells.

In contrast to other cloning strategies (e.g. In-Fusion cloning) [37], cohesive terminal sequences are created via primer overhangs only four nucleotides in length. As a result, the PCR-primers used for insert DNA generation remain short, minimizing the chance for secondary structure and primer-dimer formation as well as synthesis errors to occur. Including a single deoxyinosine residue, this type of modification is cost-efficient and available from commercial suppliers. Even at small synthesis scale, shipped primer amounts are good for several hundred PCRs. Therefore, the method is particularly cost-effective when primers can be reused, e.g. for cloning of individual mutants in the context of libraries. By employing two different overhangs, no multiple insertions were observed and cloning was directional as anticipated. Consequently, the developed method is most suitable to use when no appropriate pair of Type II restriction endonucleases for the conventional restriction-ligation strategy is at hand or available. As a result, a reduced number of such enzymes has to be maintained in the laboratory. The new strategy is also particularly suited when ligation-independent cloning (LIC) methods and techniques based on homologous recombination fail, for instance when the required homologous regions cannot be created via PCR. Although in principle possible, we recommended to avoid PCR-amplification of the vector DNA, as it is prone to introduce PCR errors. For the same reason, cloned insert sequences should be verified by sequencing.

Assuming an equal incorporation probability for all four canonical nucleotides when the DNA polymerase encounters the dI residue on the template strand, one out of four created insert termini can be ligated to a cohesive vector DNA end (compare Figure 2). It is thus conceivable that the ligation efficiency benefits from even higher molar insert to vector ratios. Based on our experiences, however, ratios between 5:1 and 8:1 are optimal. It should be emphasized that for all plasmid clones described within this study, the created ligation sites presented an exact match to the overhang of the vector fragment. Evidently, only PCR amplicons having precisely matching cohesive ends hybridize efficiently with vector molecules. Consequently, inserts which contained mismatches at the position complementary to the dI residue were not ligated to the linearized vector at detectable frequencies. Note that ligation conditions were chosen according to the manufacturer’s recommendation for T4 DNA ligase and cohesive ends. Conditions potentially favoring the formation of wrong pairings (e.g. low temperatures) should be avoided. While sufficient colony numbers were obtained in all cases, it should be noted that competent cells with relatively low transformation efficiency were used intentionally.

Although the terminal transferase activity of Taq DNA polymerase [61] could potentially cause ligation problems, additional nucleotides flanking the ligation sites or mutations therein were never observed. Inexpensive and robust, this enzyme is recommended for cloning of insert sequences up to 500 bp in length. Compatibility with the PfuTurbo C x Hotstart DNA polymerase relieves the limitations generated by the relatively low fidelity of the Taq enzyme and greatly expands the application range of the cloning method. It is further possible that the absence of terminal transferase activity leads to higher cloning efficiencies compared to Taq polymerase.

With its broad buffer compatibility, E. coli endonuclease V allows its combined use with more than 200 commercially available restriction enzymes [9]. This could further expand the range of cloning options by generating one cohesive end via EndoV and one via a Type II restriction endonuclease. In addition, this enzyme can be heat-inactivated and requires an incubation temperature of 37°C in contrast to the highly stable Thermotoga maritima enzyme. Since a fill-in reaction by the DNA polymerase cannot take place, a direct addition of endonuclease V to the PCR mixture after thermocycling is also conceivable.

Methods

Plasmids and strains

Target plasmid vectors suitable for propagation in E. coli were pUC18 and pUC19 [62], pIRES2-EGFP (Clontech, Mountain View, CA, USA) and pBluescript II KS(+) [GenBank: X52327.1]. pSB1C3 and the RFP coding device BBa_J04450 were obtained from the Registry of Standard Biological Parts [63]. pAR200d-Mitf_FL is a derivative of pQE16 (Qiagen, Hilden, Germany) containing the coding sequence of the Mus musculus microphthalmia-associated transcription factor (Mitf)[GenBank: Z23066.1]. Competent Escherichia coli XL-1 Blue (Stratagene; now Agilent Technologies, Böblingen, Germany) and BL21-cells (Novagen, Darmstadt, Germany) were prepared by standard CaCl2 protocol. Transformation efficiencies determined as cfu per μg pUC18 plasmid DNA reached 1–3 × 106 for XL-1 Blue and 3–4 × 106 for BL21.

Design of deoxyinosine-containing primers

All oligonucleotides used in this study were obtained from Sigma-Aldrich (Taufkirchen, Germany) in desalted quality without further purification. Primers were dissolved in water and stored at -20°C. All Tm values reported in this study correspond to theoretical values determined for complementary regions by the nearest-neighbor method using OligoCalc [64] with default parameters. In order to create 3′ protruding ends by endonuclease V treatment of the PCR products, a single deoxyinosine residue was placed at the third position of the primer 5′ end (compare Figure 1). DNA segments complementary to the ends of the template molecule were designed to reach Tm values of ≥ 53°C.

PCR-based amplification of target DNA fragments

Taq DNA polymerase and dNTP mix were obtained from New England Biolabs (Frankfurt am Main, Germany). The supplied Standard Taq Reaction Buffer containing 1.5 mM MgCl2 was used. Reactions with a total volume of 50 μL further contained 50 μM of each dNTP, 0.2 μM each primer, 1 ng template DNA and 2.5 u enzyme. Thermocycling was performed using a Mastercycler gradient (Eppendorf, Hamburg, Germany) with a heated lid and the following common parameters: initial denaturation 95°C 30 s; amplification (95°C 25 s, Tanneal (as calculated) 25 s, 68°C 60 s per kb) × 19–31 cycles; final extension 68°C 3 min. Unless stated otherwise, Tanneal equals to the calculated Tm value minus 3°C. For colony PCR, small samples of E. coli colonies served as the template DNA source. PfuTurbo C x Hotstart DNA polymerase (Agilent Technologies, Böblingen, Germany) was used for high fidelity PCR. Reactions contained the supplied buffer and final concentrations of 50 μM each dNTP, 0.2 μM each primer, 1 ng template DNA and 2.5 u of enzyme. Thermocycling was performed using the following parameters: 95°C 2 min; (95°C 20 s, Tanneal 20 s, 72°C 60 s per kb) × 25 cycles; 72°C 3 min. PfuUltra II Fusion HS DNA polymerase was purchased from Agilent Technologies (Böblingen, Germany). The DNA polymerases Q5 High-Fidelity, Q5 Hot Start High-Fidelity, Deep VentR and Phusion High-Fidelity were purchased from New England Biolabs (Frankfurt am Main, Germany). DNA concentrations were determined using a NanoDrop 2000 micro-volume UV-Vis spectrophotometer (Thermo Fisher Scientific, Schwerte, Germany). Agarose gels for PCR product analysis or purification, respectively, were prepared using Agarose Standard (Carl Roth GmbH, Karlsruhe, Germany) and TAE buffer. GeneRuler DNA ladder mix (Thermo Fisher Scientific, St. Leon-Rot, Germany) was used as a size marker. DNA was stained using GelRed (Biotium Inc., Hayward, CA, USA). PCR products were visualized under UV transillumination. Pictures were taken using an EOS 1100D Digital SLR camera (Canon, Krefeld, Germany) equipped with a Hoya K2 HMC filter (Hapa-Team, Eching, Germany). In order to facilitate the visual detection of faint bands, adjustments in greyscale levels were performed on the entire digital image. Silica membrane-based PCR product purification was performed using a NucleoSpin Extract II kit (Machery-Nagel, Düren, Germany).

Endonuclease V treatment

Escherichia coli or Thermotoga maritima endonuclease V (EndoV) were obtained from New England Biolabs (Frankfurt am Main, Germany) or Thermo Fisher Scientific (St. Leon-Rot, Germany), respectively. DNA treatments were performed in the supplied buffers for 45 min at 37°C or 60°C, respectively.

Ligation with plasmid vector fragments

Plasmid vector DNA fragments were produced by restriction endonuclease treatment. All restriction enzymes (EC 3.1.21.4) were of Type IIP [65] and were obtained from New England Biolabs (Frankfurt am Main, Germany), as High Fidelity (HF) versions if available. Reactions were performed at 37°C for at least 2 h using the supplied NEBuffer 4 and BSA solution. Vector DNA fragments were purified subsequent to agarose gel electrophoresis using a NucleoSpin Extract II kit (Machery-Nagel, Düren, Germany). Antarctic Phosphatase from New England Biolabs (Frankfurt am Main, Germany) was used to release the terminal 5′ phosphate groups; incubation and heat inactivation were performed as recommended by the manufacturer. Without further purification, the reaction products were used for ligation reactions. Different molar ratios of insert to vector DNA as well as 1 Weiss unit of T4 DNA Ligase and the supplied buffer from Thermo Fisher Scientific (St. Leon-Rot, Germany) were used. With a total volume of 10 μL, the reactions were incubated for 30 min at room temperature (20–25°C). A 2 μL sample was used for E. coli transformation (50 μL cell suspension) by heat shock.

Analysis of transformants

The presence of a functional ampicillin resistance cassette (AmpR) was tested by transferring freshly transformed E. coli cell suspensions onto LB agar plates supplemented with 50 μg/mL ampicillin in addition to either 50 μg/mL kanamycin (pIRES2-EGFP vector backbone) or 25 μg/mL chloramphenicol (pSB1C3 vector backbone), respectively. Colony forming units (cfu) were determined as described [66] using ImageJ (National Institutes of Health, Bethesda, MD, USA). Expression of mRFP1 [53] from the RFP coding device was visible to unaided eyes under day light. Epi-illumination pictures of red fluorescent colonies were taken by using 505 nm cyan LEDs (Winger Electronics, Dessau-Roßlau, Germany) and an EOS 1100D Digital SLR camera (Canon, Krefeld, Germany) equipped with a UV-filter.

Abbreviations

AmpR:

Ampicillin resistance gene

dI:

Deoxyinosine nucleotide

dU:

Deoxyuracil nucleotide

EndoV:

Endonuclease V

LIC:

Ligation-independent cloning

Mitf:

Microphthalmia-associated transcription factor

RFP:

Red fluorescent protein mRFP1

Tm:

Calculated midpoint of thermal dsDNA melting

Tanneal:

PCR annealing temperature

Tma:

Thermotoga maritima

UDG:

Uracil DNA glycosylase

References

  1. Roberts RJ, Vincze T, Posfai J, Macelis D: REBASE–a database for DNA restriction and modification: enzymes, genes and genomes. Nucleic Acids Res. 2010, 38: D234-D236. 10.1093/nar/gkp874.

    Article  CAS  Google Scholar 

  2. Zimmermann K, Schögl D, Mannhalter JW: Digestion of terminal restriction endonuclease recognition sites on PCR products. Biotechniques. 1998, 24: 582-584.

    CAS  Google Scholar 

  3. Wang T, Ma X, Zhu H, Li A, Du G, Chen J: Available methods for assembling expression cassettes for synthetic biology. Appl Microbiol Biotechnol. 2012, 93: 1853-1863. 10.1007/s00253-012-3920-8.

    Article  CAS  Google Scholar 

  4. Johnston K, Marmorstein R: Co-expression of proteins in E. coli using dual expression vectors. Methods Mol Biol. 2003, 205: 205-213.

    CAS  Google Scholar 

  5. Perrakis A, Romier C: Assembly of protein complexes by coexpression in prokaryotic and eukaryotic hosts: an overview. Methods Mol Biol. 2008, 426: 247-256. 10.1007/978-1-60327-058-8_15.

    Article  CAS  Google Scholar 

  6. Romier C, Ben Jelloul M, Albeck S, Buchwald G, Busso D, Celie PHN, Christodoulou E, De Marco V, van Gerwen S, Knipscheer P, Lebbink JH, Notenboom V, Poterszman A, Rochel N, Cohen SX, Unger T, Sussman JL, Moras D, Sixma TK, Perrakis A: Co-expression of protein complexes in prokaryotic and eukaryotic hosts: experimental procedures, database tracking and case studies. Acta Crystallogr D Biol Crystallogr. 2006, 62: 1232-1242. 10.1107/S0907444906031003.

    Article  Google Scholar 

  7. Bauer JC, Wright DA, Braman JC, Geha RS: Circular site-directed mutagenesis. 2002, US patent 6,391,548 B1

    Google Scholar 

  8. Liang X, Peng L, Li K, Peterson T, Katzen F: A method for multi-site-directed mutagenesis based on homologous recombination. Anal Biochem. 2012, 427: 99-101. 10.1016/j.ab.2012.05.002.

    Article  CAS  Google Scholar 

  9. NEBuffer Activity Chart for Restriction Enzymes: [https://www.neb.com/tools-and-resources/usage-guidelines/nebuffer-performance-chart-with-restriction-enzymes]

  10. Hartley JL: DNA cloning using in vitro site-specific recombination. Genome Res. 2000, 10: 1788-1795. 10.1101/gr.143000.

    Article  CAS  Google Scholar 

  11. Itaya M, Fujita K, Kuroki A, Tsuge K: Bottom-up genome assembly using the bacillus subtilis genome vector. Nat Methods. 2008, 5: 41-43.

    Article  CAS  Google Scholar 

  12. Shao Z, Zhao H, Zhao H: DNA assembler, an in vivo genetic method for rapid construction of biochemical pathways. Nucleic Acids Res. 2009, 37: e16-10.1093/nar/gkn724.

    Article  Google Scholar 

  13. Bubeck P, Winkler M, Bautsch W: Rapid cloning by homologous recombination in vivo. Nucleic Acids Res. 1993, 21: 3601-3602. 10.1093/nar/21.15.3601.

    Article  CAS  Google Scholar 

  14. Oliner JD, Kinzler KW, Vogelstein B: In vivo cloning of PCR products in E. coli. Nucleic Acids Res. 1993, 21: 5192-5197. 10.1093/nar/21.22.5192.

    Article  CAS  Google Scholar 

  15. Li MZ, Elledge SJ: MAGIC, an in vivo genetic method for the rapid construction of recombinant DNA molecules. Nat Genet. 2005, 37: 311-319. 10.1038/ng1505.

    Article  CAS  Google Scholar 

  16. Zhang Y, Werling U, Edelmann W: SLiCE: a novel bacterial cell extract-based DNA cloning method. Nucleic Acids Res. 2012, 40: e55-10.1093/nar/gkr1288.

    Article  CAS  Google Scholar 

  17. Geiser M, Cèbe R, Drewello D, Schmitz R: Integration of PCR fragments at any specific site within cloning vectors without the use of restriction enzymes and DNA ligase. Biotechniques. 2001, 31: 88-90. 92

    CAS  Google Scholar 

  18. Quan J, Tian J: Circular polymerase extension cloning of complex gene libraries and pathways. PLoS One. 2009, 4: e6441-10.1371/journal.pone.0006441.

    Article  Google Scholar 

  19. Chen GJ, Qiu N, Karrer C, Caspers P, Page MG: Restriction site-free insertion of PCR products directionally into vectors. Biotechniques. 2000, 28: 498-500. 504–505

    CAS  Google Scholar 

  20. Miyazaki K: MEGAWHOP cloning: a method of creating random mutagenesis libraries via megaprimer PCR of whole plasmids. Methods Enzymol. 2011, 498: 399-406.

    Article  CAS  Google Scholar 

  21. Spiliotis M: Inverse fusion PCR cloning. PLoS One. 2012, 7: e35407-10.1371/journal.pone.0035407.

    Article  CAS  Google Scholar 

  22. Stoddard BL: Homing endonucleases: from microbial genetic invaders to reagents for targeted DNA modification. Structure. 2011, 19: 7-15. 10.1016/j.str.2010.12.003.

    Article  CAS  Google Scholar 

  23. Li T, Huang S, Jiang WZ, Wright D, Spalding MH, Weeks DP, Yang B: TAL nucleases (TALNs): hybrid proteins composed of TAL effectors and FokI DNA-cleavage domain. Nucleic Acids Res. 2011, 39: 359-372. 10.1093/nar/gkq704.

    Article  Google Scholar 

  24. Le Provost F, Lillico S, Passet B, Young R, Whitelaw B, Vilotte J-L: Zinc finger nuclease technology heralds a new era in mammalian transgenesis. Trends Biotechnol. 2010, 28: 134-141. 10.1016/j.tibtech.2009.11.007.

    Article  CAS  Google Scholar 

  25. Kaluz S, Kölble K, Reid KB: Directional cloning of PCR products using exonuclease III. Trends Biotechnol. 1992, 20: 4369-4370.

    CAS  Google Scholar 

  26. Kuijper JL, Wiren KM, Mathies LD, Gray CL, Hagen FS: Functional cloning vectors for use in directional cDNA cloning using cohesive ends produced with T4 DNA polymerase. Gene. 1992, 112: 147-155. 10.1016/0378-1119(92)90370-5.

    Article  CAS  Google Scholar 

  27. Aslanidis C, de Jong PJ: Ligation-independent cloning of PCR products (LIC-PCR). Nucleic Acids Res. 1990, 18: 6069-6074. 10.1093/nar/18.20.6069.

    Article  CAS  Google Scholar 

  28. Li MZ, Elledge SJ: Harnessing homologous recombination in vitro to generate recombinant DNA via SLIC. Nat Methods. 2007, 4: 251-256. 10.1038/nmeth1010.

    Article  CAS  Google Scholar 

  29. Klock HE, Lesley SA: The Polymerase Incomplete Primer Extension (PIPE) method applied to high-throughput cloning and site-directed mutagenesis. Methods Mol Biol. 2009, 498: 91-103. 10.1007/978-1-59745-196-3_6.

    Article  CAS  Google Scholar 

  30. Tillett D, Neilan B: Enzyme-free cloning: a rapid method to clone PCR products independent of vector restriction enzyme sites. Nucleic Acids Res. 1999, 27: e26-10.1093/nar/27.19.e26.

    Article  CAS  Google Scholar 

  31. Donahue WF, Turczyk BM, Jarrell KA: Rapid gene cloning using terminator primers and modular vectors. Nucleic Acids Res. 2002, 30: e95-10.1093/nar/gnf094.

    Article  Google Scholar 

  32. Zheng D, Liu X, Zhou Y: 3GC cloning: PCR products cloning mediated by terminal deoxynucleotidyl transferase. Anal Biochem. 2008, 378: 108-110. 10.1016/j.ab.2008.03.053.

    Article  CAS  Google Scholar 

  33. Gál J, Kálmán M: Autosticky PCR. Directional cloning of PCR products with performed 5′ overhangs. Methods Mol Biol. 2002, 192: 141-151.

    Google Scholar 

  34. Blanusa M, Schenk A, Sadeghi H, Marienhagen J, Schwaneberg U: Phosphorothioate-based ligase-independent gene cloning (PLICing): an enzyme-free and sequence-independent cloning method. Anal Biochem. 2010, 406: 141-146. 10.1016/j.ab.2010.07.011.

    Article  CAS  Google Scholar 

  35. Zhou M, Hatahet Z: An improved ligase-free method for directional subcloning of PCR amplified DNA. Nucleic Acids Res. 1995, 23: 1089-1090. 10.1093/nar/23.6.1089.

    Article  CAS  Google Scholar 

  36. Tseng H: DNA cloning without restriction enzyme and ligase. Biotechniques. 1999, 27: 1240-1244.

    CAS  Google Scholar 

  37. Irwin CR, Farmer A, Willer DO, Evans DH: In-fusion® cloning with vaccinia virus DNA polymerase. Methods Mol Biol. 2012, 890: 23-35. 10.1007/978-1-61779-876-4_2.

    Article  CAS  Google Scholar 

  38. Gibson DG, Young L, Chuang R, Venter JC, Hutchison CA, Smith HO: Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods. 2009, 6: 343-345. 10.1038/nmeth.1318.

    Article  CAS  Google Scholar 

  39. Smith C, Day PJ, Walker MR: Generation of cohesive ends on PCR products by UDG-mediated excision of dU, and application for cloning into restriction digest-linearized vectors. Genome Res. 1993, 2: 328-332. 10.1101/gr.2.4.328.

    Article  CAS  Google Scholar 

  40. Bitinaite J, Rubino M, Varma KH, Schildkraut I, Vaisvila R, Vaiskunaite R: USER friendly DNA engineering and cloning method by uracil excision. Nucleic Acids Res. 2007, 35: 1992-2002. 10.1093/nar/gkm041.

    Article  CAS  Google Scholar 

  41. Nour-Eldin HH, Hansen BG, Nørholm MHH, Jensen JK, Halkier BA: Advancing uracil-excision based cloning towards an ideal technique for cloning PCR fragments. Nucleic Acids Res. 2006, 34: e122-10.1093/nar/gkl635.

    Article  Google Scholar 

  42. Hou J, Liu X, Zheng Y, Liu J: An efficient cloning of DNA fragments by a method based on uracil-DNA glycosylase and endonuclease IV. J Biochem Biophys Methods. 2008, 70: 1196-1198. 10.1016/j.jbbm.2007.07.006.

    Article  CAS  Google Scholar 

  43. Watkins NE, SantaLucia J: Nearest-neighbor thermodynamics of deoxyinosine pairs in DNA duplexes. Nucleic Acids Res. 2005, 33: 6258-6267. 10.1093/nar/gki918.

    Article  CAS  Google Scholar 

  44. Knittel T, Picard D: PCR with degenerate primers containing deoxyinosine fails with Pfu DNA polymerase. PCR Methods Appl. 1993, 2: 346-347. 10.1101/gr.2.4.346.

    Article  CAS  Google Scholar 

  45. Bartl S: Amplification using degenerate primers with multiple inosines to isolate genes with minimal sequence similarity. Methods Mol Biol. 1997, 67: 451-457.

    CAS  Google Scholar 

  46. Knoth K, Roberds S, Poteet C, Tamkun M: Highly degenerate, inosine-containing primers specifically amplify rare cDNA using the polymerase chain reaction. Nucleic Acids Res. 1988, 16: 10932-10.1093/nar/16.22.10932.

    Article  CAS  Google Scholar 

  47. Spee JH, de Vos WM, Kuipers OP: Efficient random mutagenesis method with adjustable mutation frequency by use of PCR and dITP. Nucleic Acids Res. 1993, 21: 777-778. 10.1093/nar/21.3.777.

    Article  CAS  Google Scholar 

  48. Wong TS, Tee KL, Hauer B, Schwaneberg U: Sequence saturation mutagenesis (SeSaM): a novel method for directed evolution. Nucleic Acids Res. 2004, 32: e26-10.1093/nar/gnh028.

    Article  Google Scholar 

  49. Lartigue MF, Leflon-Guibout V, Poirel L, Nordmann P, Nicolas-Chanoine M-H: Promoters P3, Pa/Pb, P4, and P5 upstream from bla(TEM) genes and their relationship to beta-lactam resistance. Antimicrob Agents Chemother. 2002, 46: 4035-4037. 10.1128/AAC.46.12.4035-4037.2002.

    Article  CAS  Google Scholar 

  50. Dalhus B, Arvai AS, Rosnes I, Olsen ØE, Backe PH, Alseth I, Gao H, Cao W, Tainer JA, Bjørås M: Structures of endonuclease V with DNA reveal initiation of deaminated adenine repair. Nat Struct Mol Biol. 2009, 16: 138-143. 10.1038/nsmb.1538.

    Article  CAS  Google Scholar 

  51. Yao M, Hatahet Z, Melamede RJ, Kow YW: Purification and characterization of a novel deoxyinosine-specific enzyme, deoxyinosine 3′ endonuclease, from Escherichia coli. J Biol Chem. 1994, 269: 16260-16268.

    CAS  Google Scholar 

  52. Zheng L, Gibbs MJ, Rodoni BC: Quantitative PCR measurements of the effects of introducing inosines into primers provides guidelines for improved degenerate primer design. J Virol Methods. 2008, 153: 97-103. 10.1016/j.jviromet.2008.07.029.

    Article  CAS  Google Scholar 

  53. Campbell RE, Tour O, Palmer AE, Steinbach PA, Baird GS, Zacharias DA, Tsien RY: A monomeric red fluorescent protein. Proc Natl Acad Sci U S A. 2002, 99: 7877-7882. 10.1073/pnas.082243699.

    Article  CAS  Google Scholar 

  54. Eckert KA, Kunkel TA: High fidelity DNA synthesis by the Thermus aquaticus DNA polymerase. Nucleic Acids Res. 1990, 18: 3739-3744. 10.1093/nar/18.13.3739.

    Article  CAS  Google Scholar 

  55. Cline J, Braman JC, Hogrefe HH: PCR fidelity of pfu DNA polymerase and other thermostable DNA polymerases. Nucleic Acids Res. 1996, 24: 3546-3551. 10.1093/nar/24.18.3546.

    Article  CAS  Google Scholar 

  56. Lasken RS, Schuster DM, Rashtchian A: Archaebacterial DNA polymerases tightly bind uracil-containing DNA. J Biol Chem. 1996, 271: 17692-17696. 10.1074/jbc.271.30.17692.

    Article  CAS  Google Scholar 

  57. PfuTurbo Cx Hotstart DNA Polymerase, Instruction Manual, Revision A.01: 2009, La Jolla, CA, USA: Agilent Technologies, Stratagene Products Division

  58. Gill S, O’Neill R, Lewis RJ, Connolly BA: Interaction of the family-B DNA polymerase from the archaeon Pyrococcus furiosus with deaminated bases. J Mol Biol. 2007, 372: 855-863. 10.1016/j.jmb.2007.07.015.

    Article  CAS  Google Scholar 

  59. Fujiwara H, Fujiwara K, Hashimoto K: PCR with deoxyinosine-containing primers using DNA polymerases with proofreading activity. PCR Methods Appl. 1995, 4: 239-240. 10.1101/gr.4.4.239.

    Article  CAS  Google Scholar 

  60. REBASE Enzymes: [http://rebase.neb.com/cgi-bin/over3list]

  61. Clark JM: Novel non-templated nucleotide addition reactions catalyzed by procaryotic and eucaryotic DNA polymerases. Nucleic Acids Res. 1988, 16: 9677-9686. 10.1093/nar/16.20.9677.

    Article  CAS  Google Scholar 

  62. Yanisch-Perron C, Vieira J, Messing J: Improved M13 phage cloning vectors and host strains: nucleotide sequences of the M13mp18 and pUC19 vectors. Gene. 1985, 33: 103-119. 10.1016/0378-1119(85)90120-9.

    Article  CAS  Google Scholar 

  63. The Registry of Standard Biological Parts: [http://partsregistry.org]

  64. Kibbe WA: OligoCalc: an online oligonucleotide properties calculator. Nucleic Acids Res. 2007, 35: W43-W46. 10.1093/nar/gkm234.

    Article  Google Scholar 

  65. Roberts RJ, Belfort M, Bestor T, Bhagwat AS, Bickle TA, Bitinaite J, Blumenthal RM, Degtyarev SKH, Dryden DTF, Dybvig K, Firman K, Gromova ES, Gumport RI, Halford SE, Hattman S, Heitman J, Hornby DP, Janulaitis A, Jeltsch A, Josephsen J, Kiss A, Klaenhammer TR, Kobayashi I, Kong H, Krüger DH, Lacks S, Marinus MG, Miyahara M, Morgan RD, Murray NE, et al: A nomenclature for restriction enzymes, DNA methyltransferases, homing endonucleases and their genes. Nucleic Acids Res. 2003, 31: 1805-1812. 10.1093/nar/gkg274.

    Article  CAS  Google Scholar 

  66. Sieuwerts S, de Bok FAM, Mols E, de Vos WM, van Hylckama Vlieg JET: A simple and fast method for determining colony forming units. Lett Appl Microbiol. 2008, 47: 275-278. 10.1111/j.1472-765X.2008.02417.x.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We thank Tim Kükenshöner for the pAR200d-Mitf_FL plasmid vector. The technical assistance of Sebastian Hanke is gratefully acknowledged. This work was supported by the Deutsche Forschungsgemeinschaft (DFG) priority program (SPP) 1170. We acknowledge support of the publication fee by the Deutsche Forschungsgemeinschaft and the Open Access Publication Funds of Bielefeld University.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kristian M Müller.

Additional information

Competing interests

The authors declare no competing interests.

Authors’ contributions

KM and TB conceived the method. TB designed and performed research, analyzed data and wrote the manuscript. KM contributed to writing the manuscript. KMA provided scientific advice and the supporting infrastructure. All authors read and approved the final manuscript.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Baumann, T., Arndt, K.M. & Müller, K.M. Directional cloning of DNA fragments using deoxyinosine-containing oligonucleotides and endonuclease V. BMC Biotechnol 13, 81 (2013). https://doi.org/10.1186/1472-6750-13-81

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1472-6750-13-81

Keywords