Email updates

Keep up to date with the latest news and content from BMC Microbiology and BioMed Central.

Open Access Highly Accessed Correspondence

Cultivation conditions and the diffusion of oxygen into culture media: The rationale for the flask-to-medium ratio in microbiology

Greg A Somerville1* and Richard A Proctor2

Author Affiliations

1 School of Veterinary Medicine and Biomedical Sciences, University of Nebraska, Lincoln, NE 68583-0905, USA

2 Departments of Medicine and Medical Microbiology/Immunology, University of Wisconsin School of Medicine and Public Health, Madison, WI, USA

For all author emails, please log on.

BMC Microbiology 2013, 13:9  doi:10.1186/1471-2180-13-9


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2180/13/9


Received:3 January 2013
Accepted:14 January 2013
Published:16 January 2013

© 2013 Somerville and Proctor; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Bacterial cultivation requires consideration of three things: The bacterial strain, cultivation medium, and cultivation conditions. Most microbiologists dutifully report their choice of strains and cultivation media in manuscripts; however, these same microbiologists often overlook reporting cultivation conditions. Without this information, it is difficult to determine if cultures were grown aerobically, microaerobically, or anaerobically. To cultivate bacteria aerobically, it is necessary to understand that oxygen does not readily diffuse into culture media; it needs help to get in. Microbiologists can do this by altering the flask-to-medium ratio, rpm of agitation, and/or the concentration of atmospheric oxygen, or by using baffled flasks.

Keywords:
Cultivation conditions; Aeration; Oxygen diffusion

Correspondence

In 1861, Louis Pasteur observed that yeast cultivated under aerobic growth conditions had an increased biomass relative to yeast grown under anaerobic conditions, and that this increase in biomass correlated with a decrease in fermentative metabolism [1]. This observation would become known as the Pasteur Effect; however, it would take nearly a century to provide the metabolic explanations for this observation (e.g., NAD+-dependent activation of isocitrate dehydrogenase and feedback inhibition of phosphofructokinase; [2]). During the century it took to arrive at the metabolic explanations of the Pasteur Effect, it was observed that this effect was not unique to yeast, but it was also observed in mammalian tissues [3] and bacteria [4]. Fundamental to all of these observations, were the cultivation conditions; specifically, the dissolved oxygen content of the culture media. To understand the effect of aeration on yeast, eukaryotic cells, bacteria, etc., it is essential to have a basal level of knowledge about the diffusion of oxygen into water.

The flux of oxygen into water follows Fick’s first law; hence, it is significantly influenced by the diffusion coefficient. The diffusion coefficient for oxygen into water is 2.1×10-5 cm2/second at 25°C, while the diffusion coefficient for oxygen into air is approximately 0.2 cm2/second [5]. In other words, oxygen is nearly 10,000 times more diffusive into air than it is into water. One obvious reason for this difference between the diffusivity of oxygen into air versus water is the viscosity of water is 1.002 centipoise at 20°C while the viscosity of air is approximately 0.18 centipoise. If the concentration of oxygen or the pressure is increased, then the flux of oxygen into water will increase even though the viscosity of water remains constant. From a biological perspective, it is uncommon to use saturating oxygen concentrations or high pressures. Hence, most biological experiments rely on an oxygen concentration of 20.946%; specifically, the concentration of oxygen in dry air at sea level and at 25°C. What does all of this mean to a biologist? The dissolved oxygen content of distilled water at 25°C is 5.77 ml/L [6], a concentration insufficient to support most aerobic life forms that do not have gills. This gets more complicated when we take into account that cultivation of biological specimens is never performed in pure water, but in water having dissolved solutes (e.g., electrolytes and metabolites). A 10% solution of sodium chloride at 25°C has a dissolved oxygen content 5.21 ml/L [6], so the more concentrated the cultivation medium, the less oxygen is available to the biological specimens. In addition, it is common to autoclave culture media at 121°C at 15 psi of pressure for 15 minutes to sterilize the media. Heating water to a temperature of 100°C results in the deaeration of water. While the pressure in the autoclave is maintained, deaeration is reduced; however, once the pressure is lost and the media are still boiling deaeration will occur.

As stated, the diffusion coefficient for oxygen into water is very small, resulting in a minimal depth of penetration into culture media [7]. In a static culture, the diffusion of oxygen into the medium only occurs at the very top of the surface of the liquid that is exposed to the atmosphere; hence, everything below about 1 mm is growing anaerobically. To overcome a lack of oxygen in the media, the easiest solution is to increase the surface area exposed to the atmosphere. The two more commonly used methods for increasing the surface area are: decreasing the volume of media contained in a flask, such that there is only a thin layer of culture medium in the flask; and agitating the culture, such that the media is forced into thin films. Typically, these two methods are combined such that the volume of medium contained in a culture flask will form a thin film when agitated on a rotary shaker due the application of centripetal force [8]. The formation of thin films of culture media can be aided by the use of baffled flasks, which create bubbles and increase the surface area exposed to the atmosphere [9]. Taken together, aeration in batch cultures is a function of the volume of culture media in the flask, agitation speed, and the use of baffled flasks. In practice, the flask-to-media ratio, rpm of aeration, and the use of baffled flasks must be empirically determined for the task at hand and the biological specimen being cultured.

Cultivation conditions that influence the diffusion of oxygen into culture media will alter metabolism, electron transport, redox poise, etc., causing regulatory changes (e.g., [10]) that will alter the synthesis of bioproducts. For these reasons, it is important to carefully consider the cultivation conditions when designing an experiment. As an example, changing the flask-to medium ratio from 7:1 to 4:1, with 160 rpm of agitation, causes Staphylococcus epidermidis to transition from producing acetic acid to producing lactic acid when grown in tryptic soy broth containing glucose, a change that coincides with an increase in the accumulation of polysaccharide intercellular adhesion, the extracellular matrix of a biofilm [11]. As illustrated in this example, it is imperative that authors accurately report, and editors demand, the reporting of specific cultivation conditions [12].

Acknowledgements

GAS was supported by funds provided through the Hatch Act to the University of Nebraska Institute of Agriculture and Natural Resources and by funds provided through the NIH (AI087668). We would like to thank Dr. Rosi Gaupp for critical review of the manuscript.

References

  1. Pasteur L: Animalcules infusoires vivant sans gaz oxygene libre et determinant des fermentations.

    Compt Rend Acad Sci (Paris) 1861, 52:344-347. OpenURL

  2. Barker J, Khan MA, Solomos T: Mechanism of the Pasteur effect.

    Nature 1966, 211(5048):547-548. PubMed Abstract | Publisher Full Text OpenURL

  3. Laser H: Tissue metabolism under the influence of low oxygen tension.

    Biochem J 1937, 31(9):1671-1676. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  4. Winslow CE, Walker HH, Sutermeister M: The influence of aeration and of sodium chloride upon the growth curve of bacteria in various media.

    J Bacteriol 1932, 24(3):185-208. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  5. Weast RC (Ed): CRC Handbook of Chemistry and Physics. 69th edition. Boca Raton, Florida, USA: CRC Press, Inc; 1989. OpenURL

  6. Carpenter JH: New measurements of oxygen solubility in pure and natural water.

    Limnol Oceanogr 1966, 11(2):264-277. Publisher Full Text OpenURL

  7. Fenchel T, Finlay B: Oxygen and the spatial structure of microbial communities.

    Biol Rev Camb Philos Soc 2008, 83(4):553-569. PubMed Abstract | Publisher Full Text OpenURL

  8. Finn RK: Agitation-aeration in the laboratory and in industry.

    Bacteriol Rev 1954, 18(4):254-274. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  9. McDaniel LE, Bailey EG, Zimmerli A: Effect of oxygen supply rates on growth of Escherichia coli.

    Appl Microbiol 1965, 13:109-114. PubMed Abstract | PubMed Central Full Text OpenURL

  10. Somerville GA, Proctor RA: At the crossroads of bacterial metabolism and virulence factor synthesis in Staphylococci.

    Microbiol Mol Biol Rev 2009, 73(2):233-248. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  11. Vuong C, Kidder JB, Jacobson ER, Otto M, Proctor RA, Somerville GA: Staphylococcus epidermidis polysaccharide intercellular adhesin production significantly increases during tricarboxylic acid cycle stress.

    J Bacteriol 2005, 187(9):2967-2973. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Neidhardt FC: Apples, oranges and unknown fruit.

    Nat Rev Microbiol 2006, 4(12):876. PubMed Abstract | Publisher Full Text OpenURL