Skip to main content
  • Methodology article
  • Open access
  • Published:

A new association test based on disease allele selection for case–control genome-wide association studies

Abstract

Background

Current robust association tests for case–control genome-wide association study (GWAS) data are mainly based on the assumption of some specific genetic models. Due to the richness of the genetic models, this assumption may not be appropriate. Therefore, robust but powerful association approaches are desirable.

Results

In this paper, we propose a new approach to testing for the association between the genotype and phenotype for case–control GWAS. This method assumes a generalized genetic model and is based on the selected disease allele to obtain a p-value from the more powerful one-sided test. Through a comprehensive simulation study we assess the performance of the new test by comparing it with existing methods. Some real data applications are also used to illustrate the use of the proposed test.

Conclusions

Based on the simulation results and real data application, the proposed test is powerful and robust.

Background

In a case–control genome-wide association study (GWAS), to detect the associated single-nucleotide polymorphisms (SNPs), we need to conduct a test for each individual SNP data, which are summarized as a 2-by-3 table. Although Pearson’s chi-square test can be used, it is usually less powerful than the Cochran-Armitage trend test (CATT) if the genetic model is known [13]. However, if the genetic models are unknown or various, the optimal scores in the CATTs are difficult or unable to find. If we use a CATT with fixed scores for all SNPs, we may lose power for some situations [413]. To circumvent this disadvantage, in the literature, many robust association tests have been proposed [7, 12, 1422]. Those tests do not rely solely on one specific genetic model; rather they consider several possible genetic models simultaneously. In addition, many of them are based on the assumption that the underlying genetic model is one of the following three: additive, recessive, and dominant. For example, the maxmin efficiency robust test (MERT) by Gastwirth [23, 24], and the maximum of the three optimal CATTs under recessive, additive, and dominant models (MAX3) have been studied [6]. Zheng and Ng proposed a two-phase procedure called genetic model selection (GMS) method [12] which selects a genetic model from the three models in its first stage. On the contrary, Joo et al. proposed a test which eliminates genetic models [25]. Due to the environmental interaction, there are unlimited genetic models besides the three ideal models (recessive, additive, and dominant). Chen and Ng proposed a robust association test based on the generalized genetic model (GGM) [19], which includes the recessive, additive, and dominant models as special cases. Their approach obtains a p-value from a one-sided test for each of the two possible disease alleles. With the uncertainty of the disease allele, the overall p-value is then approximated from the two dependent tests.

In this paper, we propose a new robust association test which utilizes the GGM and obtains a one-sided p-value based on the selected disease allele. The performance of the new test is compared with existing methods in terms of controlling type I error rate and detecting power. Some real data applications are also used to demonstrate the use of the new test.

Methods

GGM and existing methods

The data of a diallelic SNP with alleles A and a in a case control GWAS are summarized in Table 1, where r1, r2, and r3 are the frequencies of genotypes AA, Aa, and aa, respectively, for the r cases; and s1, s2, and s3 are the frequencies of genotypes AA, Aa, and aa, respectively, for the s controls.

Table 1 SNP data in a case control GWAS

Among the three genotypes AA, Aa, and aa, the relative risks of genotypes Aa and aa to AA are defined as:

Λ 1 = Pr case | Aa / Pr ( case | AA ) Λ 2 = Pr case | aa / Pr ( case | AA )
(1)

Under the null hypothesis that there is no association between the genotype and phenotype, we have Λ1 = Λ2 = 1. Regarding the alternative hypothesis, we assume the underlying genetic model is a GGM, which is also called order-restricted relative risks model [19]. For the case where a is the disease allele, GGM assumes Λ1 ≥ 1 and Λ2 ≥ Λ1 with at least one of the inequalities is strictly greater than. It is easy to see that the aforementioned ideal models, recessive (Λ1 = 1, Λ2 > Λ1), additive (Λ1 = (1 + Λ2)/2), and dominant (Λ1 = Λ2 > 1), are all special cases of the generalized model. If A, rather a, is the disease allele, GGM assumes 1 ≥ Λ1 and Λ1 ≥ Λ2 with at least one of the inequalities is strict.

Suppose the frequencies for AA, Aa, and aa are p 1 , p 2 , p 3 for cases and q 1 , q 2 , and q 3 for controls, respectively. Under the null hypothesis that there is no association between the disease and the genotype, it is easy to show p 1 = q 1 , p 2 = q 2 , and p 3 = q 3 . In this paper, we assume the cases and controls follow trinomial distributions TN(r, p 1 , p 2 , p 3 ) and TN (s, q 1 , q 2 , q 3 ), respectively.

The test statistics for some well-known existing methods are summarized as follows:

The CATT test statistic is [8]:

Z x = n 1 / 2 i = 0 2 x i s r i - r s i rs n i = 0 2 x i 2 n i - i = 0 2 x i n i 2 1 / 2 , where x 0 , x 1 , x 2 , = 0 , x , 1 .

They are the scores assigned to the three columns.

The statistic for MAX3 is [6]:

MAX 3 = MAX Z 0 | , | Z 1 / 2 | , | Z 1 .

The statistic for GMS is [12, 13]:

GMS = Z 0 I Z 1 / 2 > 0 I ( Z HWDTT > c ) + Z 1 / 2 I ( Z 1 / 2 > 0 ) I ( | Z HWDTT | < c ) + Z 1 I Z 1 / 2 > 0 I ( Z HWDTT < - c ) - Z 1 I ( Z 1 / 2 0 ) I ( Z HWDTT > c ) , + Z 1 / 2 I Z 1 / 2 0 I ( | Z HWDTT | c ) - Z 0 I ( Z 1 / 2 0 ) I ( Z HWDTT < - c )

where I is the indicator function, and the Hardy-Weinberg disequilibrium trend test (HWDTT) statistic is given by [15]:

Z HWDTT = rs / n 1 / 2 Δ ^ P - Δ ^ Q 1 - n 2 / n - n 1 / 2 n } { n 2 / n + n 1 / 2 n , Δ ^ P = r 2 / r - r 2 / r + r 1 / 2 r 2 , . Δ ^ Q = s 2 / s - s 2 / s + s 1 / 2 s 2 , and c is a constant and usually chosen as 1.645. Here ni = si + ri (i = 1,2,3), and n = n1 + n2 + n3.

The statistic for MERT is [24]:

MERT = Z 0 + Z 1 / 2 1 + ρ ^ 01 1 / 2 , where ρ ^ 01 = n 0 n 2 1 / 2 / n 0 + n 1 n 1 + n 2 1 / 2 .

The proposed test

Let T = T 1 T 2 T 3 = r 2 s 1 - r 1 s 2 r 3 s - r s 3 r 3 s 1 - r 1 s 3 , it can be shown that under the null hypothesis of no association, the mean of the vector E[T] = 0, and variance-covariance matrix is.

Σ T = rs p 1 p 2 n + 2 - n p 3 0 rs p 1 p 2 p 3 n - 2 0 nrs p 3 1 - p 3 nrs p 1 p 2 p 3 rs p 1 p 2 p 3 n - 2 nrs p 1 p 2 p 3 rs p 1 p 3 n + 2 - n p 2 .

We define the following “standardized” statistics:

Z = Z 1 Z 2 Z 3 = r 2 s 1 - r 1 s 2 / rs n 1 n 2 n + 2 - n n 3 / n / n 2 r 3 s - r s 3 / nrs n 3 n - n 3 / n r 3 s 1 - r 1 s 3 / rs n 1 n 3 n + 2 - n n 2 / n / n 2
(2)

It is easy to prove the following result.

Theorem 1. Asymptotically, under the null hypothesis the statistics in (2) follow a multivariate normal distribution, Z ~ MVN (0, Σ Z ), where the variance-covariance matrix is.

Σ Z = 1 0 p 2 p 3 1 - p 2 1 - p 3 0 1 p 1 1 - p 2 1 - p 3 p 2 p 3 1 - p 2 1 - p 3 p 1 1 - p 2 1 - p 3 1 .

From theorem 1,  Z1, Z2 and Z3 are linear dependent; it is not difficult to show that asymptotically  Z3 = aZ1 + bZ2, where a = p 2 p 3 1 - p 2 1 - p 3 , and b = p 1 1 - p 2 1 - p 3 . It can also be shown that under the GGM, if a (or A) is the disease allele, the expectations of Zi (i = 1,2,3) in (2) are all greater (or less) than 0. In addition, under the GGM, if z1 is close to 0, the genetic model is close to the recessive model. On the other hand, the genetic model is unlikely to be the recessive model if z1 is far from 0.

We will select the disease allele based on the sign of Z3, and combine the two one-sided p-values obtained based on the selected disease allele. Following the idea of combining p-values from independent studies using robust test [26], we define the test statistic as follows:

C = F - 1 Φ Z 1 + F - 1 Φ Z 2 if Z 3 0 F - 1 Φ - Z 1 + F - 1 Φ - Z 2 if Z 3 < 0 ,
(3)

where Φ(∙) is the cumulative density function (CDF) of the standard normal distribution (N(0,1)) and F- 1(∙) is the inverse of the CDF of the chi-square distribution with one degree of freedom.

Usually it is difficult to directly calculate the p-value (or critical value) for statistic C in (3). However, the p-value can be easily estimated using resampling method. Specifically, we first simulate two independent samples, z1, and z2, both from N(0,1). Then we calculate z 3 = a ̂ z 1 + b ^ z 2 , where a ̂ = p ̂ 2 p ̂ 3 1 - p ̂ 2 1 - p ̂ 3 , b ^ = p ̂ 1 1 - p ̂ 2 1 - p ̂ 3 are the estimates of a and b, and p ̂ i = n i n are the estimates for p i  (i = 1, 2, 3) from the data. Next we calculate.

g = F - 1 Φ z 1 + F - 1 Φ z 2 if z 3 0 F - 1 Φ - z 1 + F - 1 Φ - z 2 if z 3 < 0 . We repeat the above steps K times and get K values for g. The p-value can then be estimated as (number of g ' s that are greater than or equal to c)/K, where c is the observed statistic calculated from data using (3).

Results and discussion

Simulation study

In this section, we will assess the performance of the proposed test by comparing it with existing methods in terms of controlling type I error rate and detecting power through a comprehensive simulation study. In the simulation study we assume that cases and controls in Table 1 follow trinomial distributions with probabilities p = (p 1 ,p 2 ,p 3 ) and q = (q 1 ,q 2 ,q 3 ), respectively. It can be shown that, for given q i ’s, and relative risks Λ1, Λ2, the values of the corresponding p i ’s can be obtained as follows [1721]: p 1 = q 1 q 1 + Λ 1 q 2 + Λ 2 q 3 , p 2 = Λ 1 q 2 q 1 + Λ 1 q 2 + Λ 2 q 3 , and p 3 = Λ 2 q 3 q 1 + Λ 1 q 2 + Λ 2 q 3 .

We first assume Hardy–Weinberg equilibrium (HWE) holds for controls, and the minor allele frequencies (MAF) are 0.3 and 0.5. The disease allele is either the minor or the major allele. The numbers of cases (r) and controls (s) are both set to be 1000. Different pairs of Λ1 and Λ2 are used in the simulation to compare the performance of our proposed method with those of GMS, MERT, MAX3, Pearson’s chi-square test, and CATT with x = 0.5, which is the commonly used test under the assumption of additive genetic model. More specifically, we fix Λ2 to be 1.4 and let Λ1 vary from 1.0 to 1.4 with increment 0.1. Therefore, the three special genetic models are included in the simulation study. To assess the robustness of the proposed test, we also simulate data from genetic models other than the GGM: over-dominant model (Λ1 = 1.5, Λ2 = 1.4 ) and under-dominant model (Λ1 = 0.9, Λ2 = 1.4). The significance level is set to be 0.05, and the type I error rate and power are estimated by the proportions of rejections from 1000 replicates. To estimate the p-value for the proposed test, we resample 10,000 times (i.e., K = 10,000). The p-values from MAX3, GMS, and MERT are obtained by using the R package “Rassoc” [13].

When the null hypothesis is true (Λ1 = Λ2 = 1), all methods have rejection proportions close to the preset significance level 0.05 (For power values, see Additional file 1: Power plots of Figures S1-S5 for Tables 2-6); this indicates that they can control type I error rate. Table 2 reports the empirical powers of each method when HWE holds for controls with MAF equals to 0.3, and the minor allele is the risk allele. The chi-square test is usually less powerful than the proposed test except for the condition where the genetic model is over-dominant, under which the proposed test is more powerful than other methods. The CATT and MERT perform relatively poorly when the genetic models are far from the additive model. MAX3 and GMS perform similarly and have comparable power values with the proposed test; while the new test performs better when the genetic model is dominant or over-dominant. Table 3 lists the power values when HWE holds for controls with MAF equals to 0.3, and the major allele is the risk allele. Once again, the CATT and MERT lose power dramatically compared to other methods when the genetic model is recessive or under-dominant. The proposed test is more powerful than the MAX3 and GMS when the genetic models are close to recessive model. The chi-square test is less powerful than the proposed test when the genetic models are between recessive and dominant.

Table 2 Empirical type I error rates and powers for each method from 1000 replicates at significance level 0.05 when the sample sizes are 1000 for cases and controls and HWE holds for controls with minor allele is the disease allele and MAF equals 0.3
Table 3 Empirical type I error rates and powers for each method from 1000 replicates at significance level 0.05 when the sample sizes are 1000 for cases and controls and HWE holds for controls with major allele is the disease allele and MAF equals 0.3

Table 4 gives the empirical powers when HWE holds for controls with MAF equals to 0.5. As seen in Tables 2 and 3, the CATT and MERT are less powerful when the genetic model is dominant or over-dominant. On the contrary, chi-square test is reasonably powerful under those situations. The proposed test has the largest powers when the genetic model is close to the dominant one (i.e.,  Λ1 = 1.3, 1.4, 1.5). For other situations, the new test has comparable powers with those from MAX3 and GMS.

Table 4 Empirical type I error rates and powers for each method from 1000 replicates at significance level 0.05 when the sample sizes are 1000 for cases and controls and HWE holds for controls MAF equals 0.5

Tables 5 and 6 report the empirical powers when HWE does not hold with the genotypic frequencies for controls are (0.1, 0.36, 0.54), and the disease risks are minor allele and major allele, respectively. Once again we can see that CATT and MERT are not robust; they may lose power dramatically under some conditions (e.g., over-dominant in Table 5 and under-dominant in Table 6). The proposed test has comparable power values with those from the MAX3 and GMS; under some situations, it is more powerful (e.g., over-dominant model in Table 5).

Table 5 Empirical type I error rates and powers for each method from 1000 replicates at significance level 0.05 when the sample sizes are 1000 for cases and controls and the genotype frequencies for controls are (0.1,0.36,0.54) with minor allele is the disease allele
Table 6 Empirical type I error rates and powers for each method from 1000 replicates at significance level 0.05 when the sample sizes are 1000 for cases and controls and the genotype frequencies for controls are (0.1,0.36,0.54) with major allele is the disease allele

The method based on GGM by Chen and Ng (GGM in Tables 26) has similar performance as the proposed test. However, if the disease allele is the minor allele, the new test is more powerful than the GGM method when the genetic model is dominant or over-dominant (see Tables 2, 4 and 5). In addition, unlike the proposed test, the GGM method doesn’t report the disease allele.

Real data application

To illustrate the use of the proposed test, we apply it to some real data. The SNP rs181489 has been shown to be associated with Parkinson disease [27]. Table 7 lists the genotypic counts of cases and controls of this SNP from fifteen sites [27]. We apply the proposed test and others to the data of each site to obtain p-values. Table 8 reports the results along with the three statistics, z1, z2 and z3. Out of the 15 populations, 14 have positive values for z3, indicating the disease allele is A rather than G for this SNP. Recall the statistic z1 compares genotype GG to GA between controls and cases. A small z1 indicates the relative risk Λ1 is close to 1, and therefore the genetic model is close to the recessive one. On the other hand, if z1 is large, the underlying genetic model is unlikely to be a recessive model. For population D, the estimated z1 is -0.090, the genetic model is close to a recessive one, under which the CATT test is less powerful than other robust methods. In fact, for this population CATT obtains the largest p-value (0.024). Similar observation can be found for population G. In contrast, z1 and z2 from populations H and O are both large, indicating the underlying genetic models are close to the additive model, under which the CATT is more powerful than others. Therefore, there is no surprise that CATT obtains the smallest p-values from those two populations.

Table 7 Genotypic count data for rs181489 from different populations (data obtained from[27])
Table 8 P-values and Z statistics from different methods based on each population of the SNP rs181489 data

Conclusions

Although CATT has been widely used in case–control GWAS with the assumption that the underlying genetic model is additive, its performance may be very poor if the true genetic model is not additive. Therefore, robust but powerful association tests are more appropriate when detecting the associated SNPs. Many existing association tests make the assumption that the genetic model is one of the three special genetic models (recessive, additive, and dominant), which may be a too strong assumption in practice. In this paper, we propose a robust association test without making strong assumption about the genetic model. Our simulation results show that even the assumption of GGM is violated (e.g., over- and under- dominant models), the proposed test still has reasonable power; indicating it is a robust test. In terms of computational cost, the proposed test is reasonably fast. For instance, it took my desktop about 70 seconds to get the results in Table 8 for the real data application. Our simulation study also confirmed that the proposed test can control type I error rate with smaller cutoff p-value, e.g., 10-4 and 10-5 (see Additional file 2: Table S1-S2).

The test statistic in (3) is defined based on the idea of combining p-values from independent studies using chi-square distribution with 1 degree of freedom [26]. Although there are many other approaches available in the literature [26, 2831], it remains a research topic to choose the best one if there is any. However, it should be noticed that for case control GWAS, a robust method, such as the proposed test, is desirable due to the various underlying genetic models. In addition, when we combine the p-values from the 15 independent studies using the chi-square distribution with 1 degree of freedom [26], the overall p-value is 2.6 × 10-11.

Through simulation studies and real data applications, we have shown that the proposed test is robust and powerful. In addition, the three statistics, z1, z2, and z3, may also provide useful information about the disease allele and the genetic model.

Abbreviations

GWAS:

Genome-wide association study

SNP:

Single-nucleotide polymorphism

CATT:

Cochran-Armitage trend test

MERT:

Maxmin efficiency robust test

MAX3:

The maximum of the three optimal

CATTs:

Under recessive, additive, and dominant models

GMS:

Genetic model selection

GGM:

Generalized genetic model

CDF:

Cumulative density function

HWDTT:

Hardy-Weinberg disequilibrium trend test

HWE:

Hardy–Weinberg equilibrium.

References

  1. Cochran W: Some methods for strengthening the common chi-square tests. Biometrics. 1954, 10 (4): 417-451. 10.2307/3001616.

    Article  Google Scholar 

  2. Armitage P: Tests for linear trends in proportions and frequencies. Biometrics. 1955, 11 (3): 375-386. 10.2307/3001775.

    Article  Google Scholar 

  3. Zheng G, Freidlin B, Gastwirth JL: Comparison of robust tests for genetic association using case–control studies. IMS Lect Notes-Monogr Ser. 2006, 49: 253-265. (Optimality: The Second Erich L. Lehmann Symposium)

    Article  Google Scholar 

  4. Chen Z, Zheng G: Exact robust tests for detecting candidate-gene association in case–control trio design. J Data Sci. 2005, 3: 19-33.

    Google Scholar 

  5. Freidlin B, Podgor MJ, Gastwirth JL: Efficiency robust tests for survival or ordered categorical data. Biometrics. 1999, 55 (3): 883-886. 10.1111/j.0006-341X.1999.00883.x.

    Article  CAS  PubMed  Google Scholar 

  6. Freidlin B, Zheng G, Li Z, Gastwirth JL: Trend tests for case–control studies of genetic markers: power, sample size and robustness. Hum Hered. 2002, 53 (3): 146-152. 10.1159/000064976.

    Article  CAS  PubMed  Google Scholar 

  7. Gonzalez JR, Carrasco JL, Dudbridge F, Armengol L, Estivill X, Moreno V: Maximizing association statistics over genetic models. Genet Epidemiol. 2008, 32 (3): 246-254. 10.1002/gepi.20299.

    Article  PubMed  Google Scholar 

  8. Sasieni PD: From genotypes to genes: doubling the sample size. Biometrics. 1997, 53 (4): 1253-1261. 10.2307/2533494.

    Article  CAS  PubMed  Google Scholar 

  9. Sladek R, Rocheleau G, Rung J, Dina C, Shen L, Serre D, Boutin P, Vincent D, Belisle A, Hadjadj S, Balkau B, Heude B, Charpentier G, Hudson TJ, Montpetit A, Pshezhetsky AV, Prentki M, Posner BI, Balding DJ, Meyre D, Polychronakos C, Froguel P: A genome-wide association study identifies novel risk loci for type 2 diabetes. Nature. 2007, 445 (7130): 881-885. 10.1038/nature05616.

    Article  CAS  PubMed  Google Scholar 

  10. Slager SL, Schaid DJ: Case–control studies of genetic markers: power and sample size approximations for Armitage’s test for trend. Hum Hered. 2001, 52 (3): 149-153. 10.1159/000053370.

    Article  CAS  PubMed  Google Scholar 

  11. Zheng G, Freidlin B, Li Z, JL G: Choice of scores in trend tests for case–control studies of candidate gene associations. Biom J. 2003, 45: 335-348. 10.1002/bimj.200390016.

    Article  Google Scholar 

  12. Zheng G, Ng HKT: Genetic model selection in two-phase analysis for case–control association studies. Biostatistics. 2008, 9 (3): 391-399. 10.1093/biostatistics/kxm039.

    Article  PubMed Central  PubMed  Google Scholar 

  13. Zang Y, Fung WK, Zheng G: Simple algorithms to calculate the asymptotic null distributions of robust tests in case–control genetic association studies in R. J Stat Softw. 2010, 33 (8): 1-24.

    Article  Google Scholar 

  14. Kwak M, Joo J, Zheng G: A robust test for two-stage design in genome-wide association studies. Biometrics. 2009, 65 (4): 1288-1295. 10.1111/j.1541-0420.2008.01187.x.

    Article  PubMed  Google Scholar 

  15. Song K, Elston RC: A powerful method of combining measures of association and Hardy-Weinberg disequilibrium for fine-mapping in case–control studies. Stat Med. 2006, 25 (1): 105-126. 10.1002/sim.2350.

    Article  PubMed  Google Scholar 

  16. Wang K, Sheffield VC: A constrained-likelihood approach to marker-trait association studies. Am J Hum Genet. 2005, 77 (5): 768-780. 10.1086/497434.

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  17. Chen Z, Huang H, Ng HKT: Testing for association in case–control genome-wide association studies with shared controls. Stat Methods Med Res. 2013, Published online before print February 1, 2013, doi:101177/0962280212474061

    Google Scholar 

  18. Chen Z: Association tests through combining p-values for case control genome–wide association studies. Stat Probability Lett. 2013, 83 (8): 1854-1862. 10.1016/j.spl.2013.04.021.

    Article  Google Scholar 

  19. Chen Z, Ng HKT: A Robust method for testing association in genome-wide association studies. Hum Hered. 2012, 73 (1): 26-34. 10.1159/000334719.

    Article  PubMed Central  PubMed  Google Scholar 

  20. Chen Z, Huang H, Ng HKT: Design and analysis of multiple diseases genome-wide association studies without controls. GENE. 2012, 510 (1): 87-92. 10.1016/j.gene.2012.07.089.

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  21. Chen Z: A new association test based on Chi-square partition for case-control GWA studies. Genet Epidemiol. 2011, 35 (7): 658-663. 10.1002/gepi.20615.

    Article  PubMed  Google Scholar 

  22. Chen Z, Huang H, Ng HKT: An improved robust association test for GWAS with multiple diseases. Stat Probability Lett. 2014, 91: 153-161.

    Article  Google Scholar 

  23. Gastwirth JL: On robust procedures. J Am Stat Assoc. 1966, 61: 929-948. 10.1080/01621459.1966.10482185.

    Article  Google Scholar 

  24. Gastwirth JL: The use of maximin efficiency robust tests in combining contingency tables and survival analysis. J Am Stat Assoc. 1985, 80: 380-384. 10.1080/01621459.1985.10478127.

    Article  Google Scholar 

  25. Joo J, Kwak M, Zheng G: Improving power for testing genetic association in case–control studies by reducing the alternative space. Biometrics. 2010, 66 (1): 266-276. 10.1111/j.1541-0420.2009.01241.x.

    Article  PubMed  Google Scholar 

  26. Chen Z, Nadarajah S: On the optimally weighted z-test for combining probabilities from independent studies. Comput Stat Data Anal. 2014, 70: 387-394.

    Article  Google Scholar 

  27. Elbaz A, Ross OA, Ioannidis J, Soto-Ortolaza AI, Moisan F, Aasly J, Annesi G, Bozi M, Brighina L, Chartier-Harlin MC, Destée A, Ferrarese C, Ferraris A, Gibson JM, Gispert S, Hadjigeorgiou GM, Jasinska-Myga B, Klein C, Krüger R, Lambert JC, Lohmann K, van de Loo S, Loriot MA, Lynch T, Mellick GD, Mutez E, Nilsson C, Opala G, Puschmann A, Quattrone A, et al: Independent and joint effects of the MAPT and SNCA genes in Parkinson disease. Ann Neurol. 2011, 69 (5): 778-792. 10.1002/ana.22321.

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  28. Chen Z, Nadarajah S: Comments on ‘Choosing an optimal method to combine p‐values’ by Sungho Won, Nathan Morris, Qing Lu and Robert C. Elston, Statistics in Medicine 2009; 28: 1537–1553. Stat Med. 2011, 30 (24): 2959-2961. 10.1002/sim.4222.

    Article  PubMed  Google Scholar 

  29. Chen Z: Is the weighted z‐test the best method for combining probabilities from independent tests?. J Evol Biol. 2011, 24 (4): 926-930. 10.1111/j.1420-9101.2010.02226.x.

    Article  CAS  PubMed  Google Scholar 

  30. Loughin TM: A systematic comparison of methods for combining p-values from independent tests. Comput Stat Data Anal. 2004, 47 (3): 467-485. 10.1016/j.csda.2003.11.020.

    Article  Google Scholar 

  31. Fisher RA: Statistical Methods for Research Workers. 1932, Edinburgh: Oliver and Boyd

    Google Scholar 

Download references

Aknowledgement

The author would like to thank the support from several faculty research funds awarded to the author by the Indiana University School of Public Health-Bloomington. The author is also grateful to the three anonymous referees for their constructive comments which highly improved the presentation of the manuscript.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhongxue Chen.

Additional information

Competing interests

The author declares that he has no competing interests.

Electronic supplementary material

Additional file 1: Power plots of Figures S1-S5 for Tables 2-6.(PDF 76 KB)

12864_2014_6111_MOESM2_ESM.docx

Additional file 2: Table S1: Empirical type I error rate (×10-4) for each method from 106 replicates at significance level 10-4 with the sample sizes 1000 for cases and controls and given genotype frequencies for controls. Table S2. Empirical type I error rate (×10-5) for each method from 106 replicates at significance level 10-5 with the sample sizes 1000 for cases and controls and given genotype frequencies for controls. (DOCX 12 KB)

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, Z. A new association test based on disease allele selection for case–control genome-wide association studies. BMC Genomics 15, 358 (2014). https://doi.org/10.1186/1471-2164-15-358

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1471-2164-15-358

Keywords