Email updates

Keep up to date with the latest news and content from BMC Bioinformatics and BioMed Central.

This article is part of the supplement: Proceedings of the Fifth Annual MCBIOS Conference. Systems Biology: Bridging the Omics

Open Access Proceedings

Validation of an NSP-based (negative selection pattern) gene family identification strategy

Ronald L Frank1*, Cyriac Kandoth2 and Fikret Ercal2

Author Affiliations

1 Biological Sciences Department, Missouri S&T, Rolla, MO 65409, USA

2 Computer Science Department, Missouri S&T, Rolla, MO 65409, USA

For all author emails, please log on.

BMC Bioinformatics 2008, 9(Suppl 9):S2  doi:10.1186/1471-2105-9-S9-S2


The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2105/9/S9/S2


Published:12 August 2008

© 2008 Frank et al; licensee BioMed Central Ltd.

This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Gene family identification from ESTs can be a valuable resource for analysis of genome evolution but presents unique challenges in organisms for which the entire genome is not yet sequenced. We have developed a novel gene family identification method based on negative selection patterns (NSP) between family members to screen EST-generated contigs. This strategy was tested on five known gene families in Arabidopsis to see if individual paralogs could be identified with accuracy from EST data alone when compared to the actual gene sequences in this fully sequenced genome.

Results

The NSP method uniquely identified family members in all the gene families tested. Two members of the FtsH gene family, three members each of the PAL, RF1, and ribosomal L6 gene families, and four members of the CAD gene family were correctly identified. Additionally all ESTs from the representative contigs when checked against MapViewer data successfully identify the gene locus predicted.

Conclusion

We demonstrate the effectiveness of the NSP strategy in identifying specific gene family members in Arabidopsis using only EST data and we describe how this strategy can be used to identify many gene families in agronomically important crop species where they are as yet undiscovered.

Background

A significant proportion of genes that make up a genome are part of larger families of related genes resulting from duplications of individual genes [1], genomic segments [2], or even whole genomes ([3,4]. The accumulation of mutations in duplicates (paralogs) leads to either loss of function for one (death), altered function (subfunctionalization), or a new function (neofunctionalization). The study of the molecular processes by which functional innovation occurs interests not only evolutionary biologists, but protein engineers and medical and agricultural biologists. A clearer understanding of the extent to which gene families contribute to the selected traits in our most important crop species will help guide decisions regarding future improvements. Many studies are aimed at the diversity of function, expression, and regulation among gene family members in many species (reviewed in [5]). Others have spawned computational methods to analyze and predict the evolution of gene families in a phylogenetic context [6] or determine clinically relevant sites in a protein sequence where amino acid replacements are likely to have a significant effect on phenotype, including those that may cause genetic diseases [7].

Therefore, it is not surprising that research aimed at the identification of specific gene families and their constituent members has proliferated in the last few decades. Although experimental approaches using degenerate primers for PCR and oligofingerprinting [8] and cDNA library screening [9] generally produce the most reliable results, they can be time consuming and labor-intensive. Many strategies of gene family identification are computational approaches that take advantage of database mining and analysis tools to increase the capability and improve the efficiency of dealing with large amounts of sequenced data. Naturally, if a significant amount of a genome is sequenced computational methods can be somewhat more exhaustive in their search and identification [10-15]. However, complete genomic data is available for only a limited number of species. Expressed sequence tags (ESTs) on the other hand, are short, unedited, randomly selected single-pass sequences. They can be easily and inexpensively obtained directly from cDNA libraries. Although they were initially used for human gene discovery [16,17], exponential growth in the generation and accumulation of EST data for many diverse organisms has occurred in the last decade. The National Center for Biotechnology Information (NCBI) has a database for ESTs from over 1300 species totaling more than 48 million ESTs (as of 14 December 2007). Sixty-three species have more than 100,000 ESTs in the database making computational analyses more fruitful but complex. Because the number of ESTs in databases is increasing, computational techniques, including BLAST and its variants for comparative analysis and CAP3 [18] for sequence assembly, can be used to speed up gene or gene family identification processes and improve the feasibility of extracting meaningful information from a large and redundant database [19] when parameters are properly selected. These EST-based gene family identification strategies are valuable in species without fully sequenced genomes [20,21]. Caution must be exercised when assembling contigs from EST sequences because contigs not representative of real genes can result from chimera formation during cDNA cloning, errors in single-pass high-throughput sequencing of ESTs, or similarity between protein domains of unrelated sequences. Our group has developed a simple but novel method using evidence of negative selection pressure during divergence of the coding sequences to filter artifactual contigs from those potentially representing actual gene family members. Molecular evolution researchers studying divergence between well-characterized orthologs or paralogs often employ an estimation of the number of synonymous base substitutions per synonymous site versus the number of nonsynonymous base substitutions per nonsynonymous site [22,23]. A dS/dN ratio > 1 indicates purifying or negative selection (lower fitness) that tends to keep amino acid sequences the same if changes were deleterious. A ratio equal to 1 indicates changes that were neutral to fitness, while a dS/dN ratio < 1 would indicate adaptive or positive selection presumably because natural selection favored the amino acid changes. Differences between contigs that are artifactual should be proportionally distributed among synonymous and nonsynonymous sites, whereas differences between contigs that represent paralogs will often exhibit negative selection, dS/dN > 1.

We understand that negative selection may not be uniform over entire coding regions even assuming that purifying selection was at work in a given gene family. And not all gene families will exhibit negative selection between members. However, we believe that the number of gene families that can be detected by this approach is significant. Evidence has been found for a model whereby complementary deleterious mutations in regulatory elements between duplicate genes partitions the original function resulting in sub-functions [24]. It has also been discovered that the number of shared regulatory elements between duplicated genes in yeast decreases with evolutionary time [25]. The age of the duplicates was estimated by the accumulation of synonymous substitutions in the coding regions. Clearly, some forms of subfunctionalization can occur by changes in regulatory elements whereby some degree of negative selection has maintained protein function. Coding regions of paralogs that have subfunctionalized via changes to regulatory elements should exhibit a bias toward synonymous substitutions. In plants, a significantly greater proportion of genes belong to gene families than in animals or other major taxa [26]. Either gene duplication events have been more common in plants, or more duplicates have been retained during the evolutionary history of plants [27]. If this is the case, there should exist a significant number of gene families that can be identified by a bias toward synonymous substitutions when contigs are assembled from a significantly large database of ESTs. We have demonstrated previously that a simple strategy to detect negative selection patterns (NSP) among assembled ESTs provides a good screen for real versus artifactual contigs [28]. We have modified the filtering criterion to an empirically determined dS/dN threshold and decided to test the negative selection pattern (NSP) strategy on an EST database for which a large percentage of the ESTs have already been mapped to a fully-sequenced genome, Arabidopsis thaliana.

In this article we demonstrate the NSP strategy and report how well it was able to identify ESTs representing distinct family members in a genome where it is testable.

Methods

Gene family identification by NSP method

The five gene families chosen to validate the NSP strategy were, eukaryotic release factor 1 (RF1), ribosomal protein L6 (L6), cinnamyl alcohol dehydrogenase (CAD), phenylalanine ammonia-lyase (PAL), and an FtsH protease (FtsH). One member of the selected gene family was chosen as query for a tblastn search of the Arabidopsis thaliana dbEST. All hits with an E value < 1 × 10-10 (maximum of 150 sequences) were selected and the resulting EST sequences were assembled using a contig assembly program (AssemblyLIGN, Oxford Molecular) with 100% match over a minimum 100 nucleotide overlap. The largest open reading frame greater than 100 codons was identified in each resulting non-singleton contig (MacVector, Accelrys). Open reading frames were translated and the resulting polypeptides aligned using ClustalX. The PAL2NAL program [29] produced a codon alignment of all contig open reading frames, and the SNAP program [30] at http://www.hiv.lanl.gov webcite was used to calculate dS/dN for all pairwise comparisons of contig open reading frames.

The empirically determined threshold for dS/dN was set to 2.00 and all pairs of contigs with a dS/dN ratio greater than this were classified as putative paralogs. A graph was constructed using vertices to represent contigs, and edges to represent whether pairs of contigs are putative paralogs. In such a graph, the largest fully connected sub-graph (the maximum clique) will be made up of vertices that represent markers (contigs) to the members of the same gene family as the query protein. This sub-graph was determined using a brute-force algorithm. A brute-force algorithm works by checking every possible sub-graph for connectedness. This operation is computationally expensive, and its time complexity increases exponentially, as the factorial of the number of vertices. Fortunately, the contigs that these vertices represent are usually quite few in number. Some contigs can also be excluded from the graph since they do not pass the dS/dN threshold to pair with any other contig. This can be observed in Figure 1 where only 5 pairwise comparisons of contigs obtained a dS/dN of more than 2.00.

thumbnailFigure 1. Graph representing potential paralogs with dS/dN >= 2. Edges are labeled with the dS/dN ratios, followed by the number of substitutions (Sd+Sn) seen An edge indicates dS/dN>=2.00; No edge indicates dS/dN<2.00 OR dS/dN=NA.

Figure 1 shows the dS/dN ratios between contigs generated using the PAL1 gene as the protein query. Note that there are two maximum cliques in this graph. When there are more than one maximum cliques, we arbitrarily choose one of these cliques. The contigs represented by the vertices belonging to this clique are then identified as members of the same gene family. Any vertices that are not part of this clique are classified as either a possible marker to a distinct gene, or as a duplicate marker to an identified gene family member (in the maximum clique) which was different enough to be assembled into a different contig. In the case of Contig3 and Contig9 from Figure 1, it was found that these contigs were extremely similar to each other. They were later found to be duplicate markers to the PAL4 gene.

The representative contig for each putative gene family member identified was then compared to each of the actual gene family member sequences (NCBI) using bl2seq [31] to determine how closely contigs filtered through NSP represented the gene family. Either all or a subset of ESTs from each NSP-identified contig were checked on MapViewer (NCBI) to determine if ESTs from the same contig mapped to different gene family members or if ESTs from different contigs mapped to the same gene family member.

Results

Phenylalanine ammonia-lyase gene family

The tblastn search of using AtPAL1 protein as query resulted in ESTs and contigs reported previously [28]. Here we report the refinement of using dS/dN ratio rather than a tally of 1st, 2nd, and 3rd position differences as well as the MapViewer results that validate the accuracy of gene family member identification. The dS/dN data for the assembled contigs are shown in Table 1 and the resulting maximum clique graph indicating putative paralog relationships is shown in Figure 1. The 2.0 dS/dN threshold was established empirically by dS/dN measurements among actual members of several Arabidopsis gene families. Pairwise comparison of contigs 1, 3, and 4 with the actual Arabidopsis gene sequences, reported previously [28] indicate that these three contigs represent AtPAL1, AtPAL4, and AtPAL2, respectively with greater than 96% similarity. The contigs selected by NSP as representative of real gene family members were further validated by checking to see if each EST comprising a single contig is assigned to a single gene family member on the Arabidopsis genome by NCBI MapViewer. Table 2 shows that all ESTs that comprise a single contig map to the same gene locus and confirms that contigs 1, 3, and 4 represent the PAL1, PAL4, and PAL2 genes of Arabidopsis, respectively.

Table 1. dS/dN calculations for phenylalanine ammonia-lyase (PAL) contigs

Table 2. MapViewer locus for ESTs of NSP generated contigs

For the following four additional NSP-identified gene families only the validating data is shown, not the dS/dN data or maximum clique graphs.

Ribosomal protein L6 gene family

AtRPL6A protein was used as query for the tblastn search of A. thaliana dbEST yielding 150 EST sequences that assembled into eight contigs ranging from 449 to 953 bases and 2 to 36 ESTs each. Following ORF identification the 28 pairwise codon alignments and subsequent dS/dN values were analyzed to sort contigs into putative gene family members. From that analysis contig1, contig3 and contig8 were assigned to putative geneA, contig2, contig4, and contig5 to geneB, and contig6 to geneC. Table 3 shows that each of these contig groups identified, by greater than 98% similarity, a different member of the Arabidopsis ribosomal protein L6 gene family when aligned to the actual gene sequences.

Table 3. Percent similarity for NSP generated contigs aligned with actual ribosomal protein L6 genes

In Table 2 for ribosomal protein L6 it can be seen that all ESTs from the same contig as well as all ESTs from the same gene grouping are assigned to the same gene locus. Also, in no instances did ESTs belonging to different gene groupings by NSP ever map to the same gene locus.

Cinnamyl alcohol dehydrogenase gene family

The tblastn search of using AtCAD5 protein as query resulted in 150 EST sequences. The ESTs assembled into eight contigs ranging from 592 to 1248 bases and 2 to 21 ESTs each. Following ORF identification the 28 pairwise codon alignments and subsequent dS/dN values were analyzed to sort contigs into putative gene family members as described above (data not shown). The eight contigs assorted into four groups based on their negative selection pattern with each other contig. These four groups were arbitrarily designated GeneA represented by contig4, contig6, and contig8, GeneB, represented by contig3, contig5, and possibly contig7, GeneC represented by contig1, and GeneD represented by contig2.

The results of the comparison of representative contigs to the actual gene sequences for the CAD gene family of Arabidopsis are shown in Table 4. Each contig group identified, by greater than 99% similarity, a different member of the CAD gene family. MapViewer analysis for the CAD gene family (Table 2) shows that all ESTs from the same contig are assigned to the same gene locus, and no ESTs belonging to different contigs map to the same gene locus. Contigs validated by alignment to actual genes but not shown in Table 2 are comprised of ESTs that have not yet been mapped to specific loci by MapViewer.

Table 4. Percent similarity for NSP generated contigs aligned with actual CAD genes

Release Factor 1 gene family

AtRF1-3 protein was used as query for the tblastn search of A. thaliana dbEST yielding 109 EST sequences that assembled into six contigs ranging from 591 to 930 bases and three to 19 ESTs each. Following ORF identification the 15 pairwise codon alignments by the NSP program resulted in three contigs exhibiting NSP. These were arbitrarily assigned as contig1 representing geneA, contig3 representing geneB, and contig6 representing geneC. Each of these contigs identified, by greater than 97% similarity, a different member of the Arabidopsis RF1 gene family when aligned to the actual gene sequences (Table 5). MapViewer results again show that ESTs comprising NSP-selected contigs are unambiguous in the gene locus to which they have been assigned (Table 2).

Table 5. Percent similarity for NSP generated contigs aligned with actual release factor genes

FtsH protease gene family

The TBLASTN search of using AtFtsH8 protein as query resulted in 150 EST sequences. The ESTs assembled into six contigs ranging from 526 to 1217 bases and 2 to 33 ESTs each. Following ORF identification the 15 pairwise alignments by the NSP program resulted in two contig groups exhibiting NSP. Contig1 and contig5 represent geneA, and contig3 and contig6 represent geneB. Each of these contig groups identified, by greater than 97% similarity, a different member of the Arabidopsis FtsH gene family when aligned to the actual gene sequences, as shown in Table 6. MapViewer results again show that ESTs comprising NSP-selected contigs are unambiguous in the gene locus to which they have been assigned (Table 2).

Table 6. Percent similarity for NSP generated contigs aligned with actual FtsH genes

Discussion

It has been observed for some time that contig assembly from EST sequences can produce artifactual sequences resulting from relatively high error in EST sequences, chimeras generated in cDNA cloning, and regions of highly conserved domains interspersed in related genes. Therefore, it is necessary that strategies involving the generation of contigs from ESTs employ some criterion for either eliminating unauthentic coding regions or selecting for authentic ones. We have found that contigs representing gene families where the paralogous coding regions have been constrained by negative (purifying) selection pressure can be identified by screening for amino acid substitution patterns indicative of such (NSP, Negative Selection Patterns). However, if differences between contigs are artifacts no pattern among codon positions should be exhibited. If no negative selection pattern is detected we do not conclude that the contigs necessarily represent the same gene. Our goal is only to identify contigs that represent different genes of the same family. We do not expect that all members of a particular family will be detectable by this method. Other members may be identified with iterative searches using previously identified contigs.

To illustrate that this method can identify members of a gene family with some accuracy using only EST data we tested it on five well-characterized gene families in Arabidopsis. Each case resulted in successful identification of one to three additional gene family members distinct from the member used as initial query. Of the eight initial contigs generated from EST hits when AtCAD5 was used as query the NSP strategy identified those representing AtCAD1, AtCAD2, and AtCAD4, in addition to one representing AtCAD5 (Table 4). Moreover, each of these contigs exhibited less than 87% similarity to other actual members of the gene family. No contigs generated at the parameters specified in the assembly program represented AtCAD3, 6, 7, 8 or 9. This could be the result of relative expression levels of those genes, limits on the necessary similarity between gene family members, or limitations on the method which are discussed elsewhere [28]. Similarly, when ribosomal protein L6A was used as query the NSP strategy identified contigs accurately representing all three genes of the family, L6A, L6B, and L6C (Table 3). Furthermore, all three members of the RF1 gene family were accurately represented by NSP-screened contigs (Table 5), as were AtFtsH2 and AtFtsH8 of that 12-member gene family (Table 6). We previously reported the accurate identification of AtPAL1, 2, and 4 of phenylalanine ammonia-lyase gene family and show here further validation that the contigs identified the appropriate gene family members.

In addition, we were able to show that all the ESTs of a single contig defined the same actual gene family member according to MapViewer (Table 2), i.e., all ESTs of a single contig mapped to the same locus, and perhaps more importantly, no ESTs from different contigs of the same gene family ever mapped to the same locus. This would suggest that although the initial assembly of related ESTs may indeed generate non-valid contigs, screening by NSP allows one to determine which contigs represent real gene loci.

A limitation to the NSP strategy is the fact that only paralogs that exhibit purifying selection can be identified and that selection pattern must be evident in the portion of the coding region reconstructed by contig assembly, roughly the 3' two-thirds of the protein by our experience. For this reason the NSP strategy in it current phase will only identify a subset of gene families. However, when we consider that estimates of the number of gene families in a plant species may be 10–12,000 [32], that subset may comprise a significant portion in which NSP can detect two to three additional family members. Our goal is to broaden the NSP approach to identify as many gene families as possible without sacrificing the accuracy reported here. We have already automated the four basic steps, 1) BLAST collection of related ESTs, 2) contig assembly, 3) ORF identification, and 4) NSP screening of contigs, such that the input is a query protein of a potential gene family member and the output is contigs representing at least two gene family members. Since the query can be an orthologous sequence, we are currently working on identifying, in Glycine max, every gene family for which at least one member has been identified in another plant species. The specific objectives for accomplishing this are to:

1) use all known Glycine max mRNAs as queries to identify other family members, if any.

2) use mRNAs from related species as queries to identify gene families not identified above.

3) use Arabidopsis gene families as queries (currently about 1000 gene families in TAIR).

4) use other Arabidopsis genes, not currently associated with a family as queries to identify potential genes existing as a family in soybean but not so in Arabidopsis.

5) use all Glycine max ESTs not included in contigs from above searches in clustering experiments to potentially identify novel gene families.

Objectives 1–4 above are identical in protocol. They differ only in the species of origin for the protein query. There are currently about 1350 known Glycine max gene sequences in the NCBI database, mostly mRNA sequences but some genomic. Some of these already represent multiple members of the same gene family (e.g. glycinin and conglycinin seed storage proteins, uricase, ascorbate peroxidase, lipoxygenase, rubicase small subunit, phosphoenolpyruvate carboxylase, etc) [33]. Objective 1 will use all known genes of soybean as queries to identify other members of the gene family. Objective 2 involves genes from species more closely related to soybean than Arabidopsis. These include other eurosids I and particularly other legumes that have significant sequence data available such as Pisum sativum, Phaseolus vulgaris, and Medicago truncatula. Objective 3 will involve queries chosen from Arabidopsis genes that are known to exist as part of a gene family. Currently, The Arabidopsis Information Resource (TAIR) has genomic, coding region, and amino acid sequence data for 996 gene families comprised of 8,331 genes. Objective 4 will use as initial queries all remaining Arabidopsis genes not already identified in soybean and not associated with a gene family in TAIR. It is possible that of the remaining 16,000 genes of Arabidopsis there could be some that are associated with a family in Glycine max. Objective 5 does not start with a query sequence but rather a set of ESTs clustered by similarity to each other. Several clustering algorithms could be used for this, UniGene (at NCBI), PACE [34], or one developed in our laboratory several years ago. The majority of UniGene clusters are annotated with "strongly similar to," moderately similar to," or "weakly similar to" gene or protein functions of other organisms. Others are labeled simply as "Transcribed locus" to indicate that they represent RNA sequences that do not show similarity to any currently known gene or protein (Build #31 has 6812 such clusters). We have run a few of these clusters through the NSP strategy and found that some will generate contigs that indicate the cluster may represent ESTs from distinct members of a gene family. More work in this direction will allow us to expand the strategy to include identification of yet undiscovered gene families.

Conclusion

Although the NSP strategy is not a global gene family identification protocol, our tests on the Arabidopsis EST dataset indicate that it performs well in distinguishing contigs that represent real genes from contigs that are artifacts. Every EST tested, from contigs that NSP predicted to be distinct gene family members, mapped to the appropriate gene in Arabidopsis. Further expansion of the strategy to clustered ESTs eliminating the need for individual query sequences and further automation of the steps will allow the identification of a significant proportion of gene families with reliable accuracy.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

RLF participated in the conception and design of the study, carried out the gene family identification via NSP including BLAST, contig assembly, ORF identification, alignment and dS/dN analysis, and drafted the manuscript. CK developed scripts to construct graphical output of dS/dN results and performed all genome locus identification studies using MapViewer. FE participated in the conception, design, and development of the computational aspects of data generation. All authors read and approved the final manuscript.

Acknowledgements

This article has been published as part of BMC Bioinformatics Volume 9 Supplement 9, 2008: Proceedings of the Fifth Annual MCBIOS Conference. Systems Biology: Bridging the Omics. The full contents of the supplement are available online at http://www.biomedcentral.com/1471-2105/9?issue=S9

References

  1. Taylor JS, Raes J: Duplication and Divergence: The Evolution of New Genes and Old Ideas.

    Annual Review of Genetics 2004, 38:615-643. PubMed Abstract | Publisher Full Text OpenURL

  2. Peer Y, Meyer A: Large-Scale Gene and Ancient Genome Duplications. In The Evolution of the Genome. Elsevier Academic Press; 2005:329-368. OpenURL

  3. Gregory TR, Mable BK: Polyploidy in Animals. In The Evolution of the Genome. Elsevier Academic Press; 2005:427-517. OpenURL

  4. Tate JA, Soltis DE, Soltis PS: Polyploidy in Plants. In The Evolution of the Genome. Elsevier Academic Press; 2005:371-426. OpenURL

  5. Taylor JS, Raes J: Small-Scale Gene Duplications. In The Evolution of the Genome. Elsevier Academic Press; 2005:289-327. OpenURL

  6. Bie T, Cristianini N, Demuth JP, Hahn MW: CAFE: A Computational Tool for the Study of Gene Family Evolution.

    Bioinformatics Applications Note 2006, 22(10):1269-1271. OpenURL

  7. Gaucher EA, De Kee DW, Benner SA: Application of DETECTER: An Evolutionary Genomic Tool to Analyze Genetic Variations to the Cystic Fibrosis Gene Family.

    BMC Genomics 2006., 7(44) PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  8. Fuchs T, Malecova B, Linhart C, Sharan R, Khen M, Herwig R, Shmulevich D, Elkon R, Steinfath M, O'Brien JK, Radelof U, Lehrach H, Lancet D, Shamir R: DEFOG: A Practical Scheme for Deciphering Families of Genes.

    Genomics 2002, 80(3):295-302. PubMed Abstract | Publisher Full Text OpenURL

  9. Schwarz RS, Hodes-Villamar L, Fitzpatrick KA, Fain MG, Hughes AL, Cadavid LF: A Gene Family of Putative Immune Recognition Molecules in the Hydroid Hydractinia.

    Immunogenetics 2007, 59(3):233-246. PubMed Abstract | Publisher Full Text OpenURL

  10. Albert VA, Soltis DE, Carlson JE, Farmerie WG, Wall PK, Ilut DC, Solow TM, Mueller LA, Landherr LL, Hu Y, Buzgo M, Kim S, Yoo M-J, Frohlich MW, Perl-Treves R, Schlarbaum SE, Bliss BJ, Zhang X, Tanksley SD, Oppenheimer DG, Soltis PS, Ma H, dePamphilis CW, Leebens-Mack JH: Floral Gene Resources from Basal Angiosperms for Comparative Genomics Research.

    BMC Plant Biology 2005, 5(1):5. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  11. Cannon SB, Young ND: OrthoParaMap: Distinguishing Orthologs from Paralogs by Integrating Comparative Genome Data and Gene Phylogenies.

    BMC Bioinformatics 2003., 4(35) PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Liu Q: Computational Identification and Systematic Analysis of the ACR Gene Family in Oryza Sativa.

    Journal of Plant Physiology 2006, 163(4):445-451. PubMed Abstract | Publisher Full Text OpenURL

  13. Nakano T, Suzuki K, Fujimura T, Shinshi H: Genome-Wide Analysis of the ERF Gene Family in Arabidopsis and Rice.

    Plant Physiology (Rockville) 2006, 140(2):411-432. OpenURL

  14. Tian C, Wan P, Sun S, Li J, Chen M: Genome-Wide Analysis of the GRAS Gene Family in Rice and Arabidopsis.

    Plant Molecular Biology 2004, 54(4):519-532. PubMed Abstract | Publisher Full Text OpenURL

  15. Zhang G, Wang H, Shi J, Wang X, Zheng H, Wong GK, Clark T, Wang W, Wang J, Kang L: Identification and Characterization of Insect-Specific Proteins by Genome Data Analysis.

    BMC Genomics 2007, 8:93. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  16. Adams MD, Kelley JM, Gocayne JD, Dubnick M, Polymeropoulos MH, Xiao H, Merril CR, Wu A, Olde B, Moreno RF, Kerlavage AR, McCombie WR, Venter JC: Complementary DNA Sequencing: Expressed Sequence Tags and Human Genome Project.

    Science 1991, 252(5013):1651-6. PubMed Abstract | Publisher Full Text OpenURL

  17. Adams MD, Dubnick M, Kerlavage AR, Moreno RF, Kelley JM, Utterback TR, Nagle JW, Fields C, Venter JC: Sequence Identification of 2375 Human Brain Genes.

    Nature 1992, 355:632-634. PubMed Abstract | Publisher Full Text OpenURL

  18. Huang X, Madan A: CAP3: A DNA Sequence Assembly Program.

    Genome Research 1999, 9(9):868-877. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  19. Nagaraj SH, Gasser RB, Ranganathan S: A Hitchhiker's Guide to Expressed Sequence Tag (EST) Analysis.

    Briefings in Bioinformatics 2006, 8(1):6-21. PubMed Abstract | Publisher Full Text OpenURL

  20. Brown S, Chang JL, Sadée W, Babbitt PC: A Semiautomated Approach to Gene Discovery through Expressed Sequence Tag Data Mining: Discovery of New Human Transporter Genes.

    AAPS PharmSci 2003., 5(1) PubMed Abstract | Publisher Full Text OpenURL

  21. Retief JD, Lynch KR, Pearson WR: Panning for Genes: A Visual Strategy for Identifying Novel Gene Orthologs and Paralogs.

    Genome Research 1999, 9:373-382. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  22. Nei M, Gojobori T: Simple methods for estimating the numbers of synonymous and nonsynonymous nucleotide substitutions.

    Mol Biol Evol 1986, 3(5):418-426. PubMed Abstract | Publisher Full Text OpenURL

  23. Ota T, Nei M: Variance and covariances of the numbers of synonymous and nonsynonymous substitutions per site.

    Mol Biol Evol 1994, 11(4):613-619. PubMed Abstract | Publisher Full Text OpenURL

  24. Force A, Lynch M, Pickett FB, Amores A, Yan YL, Postlethwait J: Preservation of Duplicate Genes by Complementary Degenerative Mutations.

    Genetics 1999, 151:1531-1545. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  25. Papp B, Pál C, Hurst LD: Evolution of Cis-Regulatory Elements in Duplicated Genes of Yeast.

    TRENDS in Genetics 2003, 19:417-422. PubMed Abstract | Publisher Full Text OpenURL

  26. Lockton S, Gaut BS: Plant Conserved Non-Coding Sequences and Paralogue Evolution.

    TRENDS in Genetics 2005, 21:60-65. PubMed Abstract | Publisher Full Text OpenURL

  27. Shiu SH, Shih MC, Li WH: Transcription Factor Families have Much Higher Expansion Rates in Plants than in Animals.

    Plant Physiology 2005, 139:18-26. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  28. Frank RL, Mane A, Ercal F: An Automated Method for Rapid Identification of Putative Gene Family Members in Plants.

    BMC Bioinformatics 2006, 7:S19. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  29. Suyama M, Torrents D, Bork P: PAL2NAL: Robust Conversion of Protein Sequence Alignments into the Corresponding Codon Alignments.

    Nucleic Acids Res 2006, 34:W609-W612. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  30. Korber B: HIV Signature and Sequence Variation Analysis. In Computational Analysis of HIV Molecular Sequences. Edited by Rodrigo AG, Learn GH. Netherlands: Kluwer Academic Publishers; 2000:55-72. OpenURL

  31. Tatiana A, Tatusova TL: Blast 2 sequences: A new tool for comparing protein and nucleotide sequences.

    FEMS Microbiol Lett 1999, 174:247-250. PubMed Abstract | Publisher Full Text OpenURL

  32. Nelson RT, Shoemaker RC: Identification and Analysis of Gene Families from the Duplicated Genome of Soybean using EST Sequences.

    BMC Genomics 2006, 7:204. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  33. Frank RL, Ercal F: Evaluation of Glycine max mRNA clusters.

    BMC Bioinformatics 2005, 6(Suppl 2):S7. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  34. Kalyanaraman A, Aluru S, Kothari S, Brendel V: Efficient clustering of large EST data sets on parallel computers.

    Nucleic Acids Res 2003, 31:2963-2974. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL