Skip to main content
  • Research article
  • Open access
  • Published:

Predicting protein-protein interface residues using local surface structural similarity

Abstract

Background

Identification of the residues in protein-protein interaction sites has a significant impact in problems such as drug discovery. Motivated by the observation that the set of interface residues of a protein tend to be conserved even among remote structural homologs, we introduce PrISE, a family of local structural similarity-based computational methods for predicting protein-protein interface residues.

Results

We present a novel representation of the surface residues of a protein in the form of structural elements. Each structural element consists of a central residue and its surface neighbors. The PrISE family of interface prediction methods uses a representation of structural elements that captures the atomic composition and accessible surface area of the residues that make up each structural element. Each of the members of the PrISE methods identifies for each structural element in the query protein, a collection of similar structural elements in its repository of structural elements and weights them according to their similarity with the structural element of the query protein. PrISE L relies on the similarity between structural elements (i.e. local structural similarity). PrISE G relies on the similarity between protein surfaces (i.e. general structural similarity). PrISE C , combines local structural similarity and general structural similarity to predict interface residues. These predictors label the central residue of a structural element in a query protein as an interface residue if a weighted majority of the structural elements that are similar to it are interface residues, and as a non-interface residue otherwise. The results of our experiments using three representative benchmark datasets show that the PrISE C outperforms PrISE L and PrISE G ; and that PrISE C is highly competitive with state-of-the-art structure-based methods for predicting protein-protein interface residues. Our comparison of PrISE C with PredUs, a recently developed method for predicting interface residues of a query protein based on the known interface residues of its (global) structural homologs, shows that performance superior or comparable to that of PredUs can be obtained using only local surface structural similarity. PrISE C is available as a Web server at http://prise.cs.iastate.edu/

Conclusions

Local surface structural similarity based methods offer a simple, efficient, and effective approach to predict protein-protein interface residues.

Background

Protein-protein interactions play a central role in many cellular functions. In the past decade, significant efforts have been devoted to characterization as well as discovery of these interactions both in silico and in vivo [15]. Of particular interest is the identification of the amino acid residues that participate in protein-protein interactions because of its importance in elucidation of mechanisms that underlay biological function and rational drug design (among other applications) [6]. However, experimental determination of interface residues is expensive, labor intensive, and time consuming [7]. Hence, there is an urgent need for computational methods for reliably identifying from the sequence or structure of a query protein, the subset of residues that are likely to be involved in the interaction of that protein with one or more other proteins.

Several methods for predicting protein-protein interface residues have been proposed in the literature (see the reviews in [810]). A variety of features of the target residue (and often its sequence or structural neighbors) have been explored [11, 12] in combination with machine learning techniques [1323] or scoring functions [2429] to construct predictors of interface residues. Of particular interest are recent methods for protein interface prediction based on the structural similarity between a query protein and proteins with known structure. These methods are motivated by observations that suggest that interaction sites tend to be conserved among structurally similar proteins [3034]. As the number of experimentally determined complexes in the Protein Data Bank (PDB) [35] increases, the likelihood of success of such an approach to interface prediction can be expected to increase as well. Hence, there is growing interest in structural similarity based approaches to protein-protein interface prediction. For example, Konc and Janežič [36] and Carl et al. [37] developed a method that utilizes a graph based representation of protein surfaces to predict interface residues that exploits the higher degree of conservation of topological and physico-chemical features among interaction sites as compared to non-interaction sites of proteins. Zhang et al. [38] introduced PredUs, a new method that predicts interaction sites using counts of interface residues derived from alignments between the structure of a query protein and the structures of a set of proteins that are structurally similar to the query protein. More recently, PredUs has been updated [39] to incorporate a support vector machine that uses accessible surface area of regions on the protein surface and the counts of interface residues derived from the structural alignments to predict interface residues.

A potential limitation of structural similarity based interface prediction methods is that they are effective only to the extent that a set of proteins (with experimentally determined interface residues) that are structurally similar to the query protein can be reliably identified. In light of evidence that the degree of conservation of interfaces tends to be substantially higher than that of non-interfaces [30] and hence that of whole protein structures, there is increasing interest in methods for predicting interface residues based on experimentally determined interface residues in proteins that are locally (as opposed to globally) similar in structure to the query protein [40, 41].

Against this background, we introduce PrISE (Pr edictor of I nterface Residues using S tructural E lements), a novel family of predictors of protein-protein interface residues based on local structural similarity. The PrISE family of interface prediction methods utilizes a repository of structural elements constructed from a dataset of proteins that are part of experimentally determined protein complexes retrieved from the PDB. A structural element is defined as a protein surface residue surrounded by its neighbors on the protein surface. The PrISE methods utilize a novel representation of each structural element that captures the distribution of the constituent atoms and the solvent accessible surface areas of residues (calculated from the individual proteins). The prediction of protein-protein interface residues using any of the PrISE methods is based on the identification of a collection of structural elements in the repository that are similar to the structural elements of a query protein. The PrISE predictors label the central residue of each structural element in the query protein as an interface residue if a weighted majority of the similar structural elements are interface residues and as a non-interface residue otherwise. PrISE L relies on the similarity between structural elements to assign the weights to each query structural element whereas PrISE G relies on the similarity between protein surfaces in terms of structural elements. PrISE C combines the local and global approaches of PrISE L and PrISE G . We assessed the performance of the PrISE family of predictors using several benchmark datasets. The results of experiments show that PrISE C outperforms PrISE L and PrISE G . The three PrISE family of predictors outperform two other local structural similarity based interface residue predictors [37, 41]. PrISE C also outperforms methods that use diverse structural, evolutionary, and physico-chemical properties to perform prediction of interface residues using machine learning and scoring functions, even in the absence of proteins with similar structure. The performance of PrISE C is superior or comparable to that of PredUs[38, 39], a novel method that predict interface residues using the known interface residues on proteins with similar structure to a query protein. Unlike PredUs, that require the existence of structural homologs to perform predictions, PrISE C is able to generate prediction for all the proteins with known structure.

Methods

Structural elements and their representation

A structural element is defined by an amino acid residue on the protein surface (referred to as a surface residue) and its neighboring surface residues. Thus, the number of structural elements in a protein equals the number of its surface residues. An amino acid residue is considered a surface residue if its accessible surface area in the monomer is greater than zero. Two residues are considered neighbors if the distance between the Van der Waals surface of an atom of one residue and the Van der Waals surface of an atom of the other residue is ≤ 1.5 Å. Accessible surface areas were computed using Naccess [42].

A structural element is represented using four features: (i) The name of the central residue of the structural element; (ii) the accessible surface area of the central residue of the structural element; (iii) the accessible surface area of the structural element (computed as the addition of the accessible surface areas of its residues); and (iv) a histogram of atom nomenclatures representing the atomic composition of the surface of the structural element. A histogram of atom nomenclatures contains the count of the number of atoms on the surface of the structural element for each atom nomenclature (e.g. number of α-carbons, number of β-carbons, etc.). There are 36 atom nomenclatures (a list is presented in section one of the Additional File 1), hence, a histogram of atom nomenclatures has 36 bins. An atom is considered to be in the surface of a protein if its accessible surface area is > 0 Å2. The four features that represent a structural element are used to define a similarity measure between structural elements that consider structural and physico-chemical properties. The rationale behind this representation is that structural elements with similar accessible surface areas and centered on identical residues with similar surface areas have similar structure. In addition, two structural elements with similar atomic composition of the surface of the structural element (represented by the histogram of atom nomenclatures) have similar physico-chemical properties.

Distance between histogram of atom nomenclatures

The distance between the histograms of atom nomenclatures of two structural elements provides a measure of their physico-chemical similarity. The distance between two histograms of atom nomenclatures x and y is computed using the city block metric: i = 1 36 x i - y i , where x i and y i denote the number of atoms (corresponding to the ith nomenclature in the histograms) on the surface of the two structural elements (e.g. number of α-carbons exposed to the solvent)a.

Repository of structural elements

A repository of structural elements stores all the structural elements extracted from a set of proteins. To perform different experiments, we built two repositories from two different sets of proteins. The first, called the ProtInDB repository, was built from the biological assemblies stored in ProtInDB[43], a database of protein-protein interface residues, which in turn was derived from protein complexes in PDB [35]. This repository is composed of 21,289,060 structural elements extracted from 88,593 interacting chains (as of February 21, 2011). The second repository, called the ProtInDB PQS repository, is composed of the structural elements extracted from proteins that are common to both ProtInDB and the Protein Quaternary Structure database (PQS) [44]. This repository contains 13,396,420 structural elements extracted from 55,974 interacting chains in 21,786 protein complexes. A protein chain is considered an interacting chain if it contains at least five contact amino acid residues. An amino acid residue in a protein chain is considered a contact amino acid if the Van der Waals surface of at least one of its heavy atoms is no further than at most 0.5 Å from the Van der Waals surface of some heavy atom(s) of an amino acid residue belonging to another chain.

Retrieving similar structural elements

The prediction of interface residues in a query protein is based on the existence of similar structural elements for each structural element in the protein. The process of retrieval similar structural elements from a repository of structural elements should satisfy two requirements: It should be efficient and it should retrieve similar structural elements for every structural element in the query protein. These requirements are satisfied using four constraints that every structural element q s retrieved from the repository and associated with a query structural element q r should comply: (i) q r and q s must not be from the same protein complex; (ii) the central residues r and s of the structural elements q r and q s respectively, must be identical; (iii) the difference between the accessible surface areas of r and s should be ≤ 5% of the maximum accessible surface area of residues identical to r; and (iv) the differences between the accessible surface areas of q r and q s must be ≤ 15% of the maximum estimated accessible surface area of any structural element centered on a residue identical to r. These constraints were experimentally determined, as explained in the Additional File 1.

PrISE algorithm

The PrISE algorithm is summarized in Figure 1. First, a query protein structure is decomposed into a collection of structural elements. For each structural element in the query protein, PrISE retrieves a collection of similar structural elements (referred as samples) from the repository of structural elements. PrISE uses the collection of retrieved samples and information derived from their associated proteins to predict whether the central residue of each structural element is an interface residue. The information derived from the associated proteins can be incorporated into our proposed method using three different approaches (Equations 1-3) that result in three variants of the PrISE algorithm for predicting protein interface residues. The first method, PrISE L , uses similarity between structural elements (i.e. local structural similarity). The second method, PrISE G , utilizes a measure of similarity between protein surfaces (i.e. general structural similarity). The last method, PrISE C , combines local and general structural similarity. A detailed description of these approaches as well as the rationales behind them are provided next.

Figure 1
figure 1

Prediction of interface residues using surface structural similarity.

Let S be a repository of structural elements (where each element is indexed by the protein from which the structural element is derived and the surface residue that it represents). Let Q be a query protein. Let S(Q) be the collection of structural elements of Q (recall that there are as many structural elements in S(Q) as there are surface residues in Q). To predict whether the central residue r(q) of a structural element q S(Q) is an interface residue, a collection S q of structural elements that are most similar to q is retrieved from the repository S based on the distance between the histogram of atom nomenclatures q and that of each element in Sb . In the event of a tie, the sample with the lowest difference in accessible surface area between its central residue and residue r(q) is chosen.

For each structural element s in S, let π ( s ) denote the protein from which s was extracted. Given a protein P and an arbitrary collection R of structural elements, we define the contribution, cont(P, R), as the number of structural elements in R that are associated with the protein P. For each q S (Q), the collection of structural elements of protein Q, and for each structural element s S q , we define the weights w G (s, q), w L (s, q) and w C (s, q) (used by PrISE G , PrISE L , and PrISE C respectively) as follows:

w G ( s , q ) = c o n t ( π ( s ) , z Q )
(1)

where z Q = q S ( Q ) S q . Intuitively, the more similar the query protein Q containing the structural element q is to the protein from which the structural element s was derived, the greater the influence of s to the prediction on q.

Given a structural element q S(Q), let Re(q) be the set of surface residues of Q that belong to q. Let N(q) be the set of structural elements associated with residues in Re(q). Let N q = n N ( q ) S n (where S n , the collection of structural elements that are most similar to n, is retrieved from the repository S of structural elements), we define the weight for PrISE L as:

w L ( s , q ) = c o n t ( π ( s ) , N q ) )
(2)

Intuitively, the more similar the local surface patch of the structural element q is to a local surface patch of the protein from which the structural element s was derived, the greater the influence of s to the prediction on q.

For PrISE C ,

w c ( s , q ) = w G ( s , q ) × w L ( s , q )
(3)

Let S+(q) = {s S q |r(s) is an ineterface residue} and S-(q) = {s S q |r(s) is a non-interface residue}. Thus, PrISE C combines the predictions of PrISE L and PrISE G . Because PrISE L and PrISE G weight each sample based on different criteria, this allows PrISE C potentially to outperform each of them by taking advantage of complementary methods.

In the case of PrISE G , the weight of positive samples associated with structural element q is defined as:

W G + ( q ) = s S + ( q ) w G ( s , q )

Similarly, the weight of negative samples associated with structural element q is defined as:

W G - ( q ) = s S - ( q ) w G ( s , q )

Finally, classification is performed by selecting a threshold con the probability that indicates whether the central residue r(q) of the structural element q is likely to be an interface residue:

p r o b G + ( r ( q ) ) = W G + ( q ) W G + ( q ) + W G - ( q )

In the case of PrISE L , and PrISE C , the corresponding quantities W L +(q), W L -(q), and prob L +(r(q)) and W C +(q), W C -(q), and prob C +(r(q)) are defined in terms of the corresponding weights w L and w C (respectively).

Datasets

Four datasets were used to assess the performance of the PrISE family of interface predictors. The first dataset, DS24Carl [37], is composed of 24 chains: 16 extracted from transient complexes and eight extracted from complexes of different types. In this dataset, a residue is defined as an interface residue if the distance of the Van der Waals surface of any of its heavy atoms to a Van der Waals surface in any heavy atom of a different chain is ≤ 3 Å. The other three datasets were defined in [38] from complexes used to evaluate protein docking software. DS188 is composed of 188 proteins chains derived from the Docking Benchmark 3.0 [45] sharing at most 40% sequence identity and containing 39,799 residues and 7,419 interacting residues. The other two datasets, DS56bound and DS56unbound, are composed by 56 protein chains derived from bound and unbound structures from the first 27 targets in CAPRI [46]. DS56bound and DS56unbound have a total of 12,123 and 12,173 residues, and 2,154 and 2,112 interacting residues respectively. For these three datasets, interface residues are defined as amino acids on two different protein chains with at least a pair of heavy atoms separated by at most 5 Å. These interfaces were computed from complexes extracted from PQS by the authors of [38].

Performance evaluation

The reliability of a prediction may be evaluated using different performance measures [47]. We focused our evaluation on the following measures:

p r e c i s i o n = T P T P + F P
r e c a l l = T P T P + F N

where TP refers to interface residues correctly predicted, FP to non-interface residues predicted as interfaces, and FN to interface residues predicted as non-interfaces. Precision evaluates the quality of the prediction in reference to the set of predicted interface residues, whereas recall measures the quality of the prediction with respect to the set of actual interface residues. When possible, the performance of different classifiers is evaluated by comparison of the precision-recall curve of each classifier. These curves are generated by computing precision and recall using different threshold values on the probability of each residue to be part of the interface. Therefore, these curves provide a more comprehensive evaluation than a pair of precision and a recall values.

For sake of completeness, we computed the following measures:

F 1 = 2 × p r e c i s i o n × r e c a l l p r e c i s i o n + r e c a l l
A c c u r a c y = T P + T N N
C C = ( T P × T N ) - ( F P × F N ) ( T P + F N ) × ( T P + F P ) × × ( T N + F P ) × ( T N + F N )

The F1 score computes the harmonic mean between precision and recall. Accuracy measures how well interface and non-interface residues are correctly predicted. CC refers to the Matthews correlation coefficient. In addition, we use the area under the receiver operating characteristic (AUC ROC). This measure computes the area under the curve generated by computing the sensitivity and the false positive rate using different thresholds on the probabilities that indicates whether a residue belongs to the interface.

Results and discussion

We compared the PrISE family of algorithms using the DS188, DS24Carl, DS56bound and DS56unbound datasets. We also assessed the extent to which the quality of predictions is impacted by the presence of structural elements derived from homologs of the query protein in the repository of structural elements used to make the predictions. In addition, the performance of PrISE C was assessed against the performance of several classifiers based on machine learning methods, scoring functions, and local and global structural similarity on different datasets.

Comparison of PrISEL, PrISEG and PrISEC

Recall that PrISE L relies on the similarity between structural elements (i.e. local structural similarity), PrISE G relies on the similarity between protein surfaces (i.e. general structural similarity), and PrISE C combines local structural similarity and general structural similarity to predict interface residues. The performances of these three predictors were compared using the DS188 dataset. For this experiment, samples were extracted from the ProtInDB repository. In addition, samples extracted from proteins sharing more than 95% of sequence identity with the query protein and belonging to the same species were excluded from the prediction process to avoid overestimation on the predictions. To simulate a random prediction, the interface/non-interface labels associated with the central residue in each sample in the repository were randomly shuffled. The results of this experiment are presented in Figure 2 as precision-recall curves. These results indicate that PrISE L , PrISE G , and PrISE C outperform the random predictor. Furthermore, PrISE C achieves similar or better performance than PrISE G whereas PrISE G predictions are superior to those of PrISE L . Similar conclusions are supported by experiments using the DS24Carl, DS56bound and DS56unbound datasets d. As a consequence, PrISE C was selected to perform the experiments presented in the next subsections.

Figure 2
figure 2

Comparative performances of PrISE L , PrISE G , PrISE C , and randomly generated predictions on the DS188 dataset.

Impact of homologs of the query protein on the quality of predictions

We assess the extent to which the predictions are impacted by the presence of structural elements derived from sequence homologs of the query protein. The first experiment excludes samples derived from proteins belonging to the same species that share ≥ 95% of sequence identity with the query protein (called homologs from the same species). The second experiment excludes samples from all the proteins that share ≥ 95% of sequence identity with the query protein (referred to as homologs).

Figure 3 compares the two methods for excluding homologs with a setup in which only the samples derived from proteins with the same PDB ID as the query proteins are excluded e. As seen from Figure 3, the prediction performance is better when sequence homologs of the query protein are not excluded from the set of proteins used to generate the repository used for making the predictions. The best performance is achieved by excluding the proteins with the same PDB ID as those of the query proteins.

Figure 3
figure 3

Comparison of schemes for filtering out similar proteins from the prediction process. This experiment was performed using PrISEC with the DS188 dataset.

Comparison with two prediction methods based on geometric-conserved local surfaces

We compared the three predictors from the PrISE family with the predictors proposed by Carl et al. in [37, 41]. These methods rely on conservation of the geometry and the physico-chemical properties of surface patches to predict interfaces. In [37], the conserved regions were extracted from proteins with similar structures. In [41], similar performance was achieved using conserved regions extracted using local structural alignments. This comparison was performed using the DS24Carl dataset composed of 24 proteins and generated in [41]. In the case of the PrISE family of methods, samples were retrieved from the ProtInDB repository. Samples extracted from proteins sharing more than 95% of sequence identity with the query protein and belonging to the same species were not used in the prediction process. The results of the experiment, presented in Table 1, indicate that each of the three predictors from the PrISE family outperforms the predictors described in [37, 41]. The differences in performances may be explained by the differences in the prediction techniques. In particular, PrISE family of predictors, unlike those of Carl et al., exploit the interface/non-interface labels associated with surface patches that share structural similarity with the surface neighborhood of each surface residue of the query protein.

Table 1 Performance of different methods on the DS24Carl dataset

Results of a similar experiment excluding samples extracted from homologs of the query proteins, as well as results of experiments using the protInDb PQS repository, are presented in section six of the Additional File 1.

Comparison with a prediction method based on protein structural similarity

We compared PrISE C with PredUs[38, 39], a method that relies on protein structural similarity, using the DS188, DS56bound and DS56unbound datasets. PredUs is based on the idea that interaction sites are conserved among proteins that are structurally similar to each other. PredUs computes a structural alignment of the query protein with every protein in a set of proteins with known interface residues. The alignments are used to extract a contact frequency map which indicates for each residue in the query protein, the number of interface residues that are structurally aligned with it. The contact frequency map is then used to predict whether each residue on the query protein is an interface residue. In [38], the prediction was performed using a logistic regression function that receives as inputs the counts contained in the contact frequency maps. In [39], the logistic regression function was replaced by a support vector machine (SVM) classifier that uses accessible surface areas and the counts contained in the contact frequency maps to perform prediction.

In order to perform a fair comparison between PrISE and PredUs, the structural elements used by PrISE and the structural neighbors used by PredUs were extracted from the same dataset of proteins. This dataset corresponds to the subset of proteins that are common to both ProtInDB and PQS which ensures the largest overlap between the proteins used by PredUs (which relies on the structural neighbors extracted from the PDB and PQS) and PrISE (which relies on the proteins extracted from biological assemblies in the PDB and deposited in ProtInDB). This resulting dataset, used to create the protInDBPQS repository, includes 55,974 protein chains derived from 21,786 protein complexes. PredUs predictions were obtained from the available web server [39]. This server allows us to choose the set of structural neighbors to be considered in the prediction process. Using this feature, we were able to exclude from the sets of structural neighbors those proteins that were not in the intersection of ProtInDB and PQS as well as homologs or homologs from the same species.

A first comparison of the PrISE family of predictors and PredUs was carried out using the DS188 dataset. However, since the SVM used by PredUs was trained using this dataset [39], it is likely that the estimated performance of PredUs in this case is overly optimistic, resulting in an unfair comparison with PrISE. We found that in 7 of 188 cases (corresponding to the PDB Ids and chains 1ghq-A, 1gp2-G, 1t6b-X, 1wq1-G, 1xd3-B, 1z0k-B, and 2ajf-A) PredUs failed to find structural neighbors, and hence failed to predict interfaces. In contrast, the PrISE predictors found the structural elements needed to produce predictions for the 188 cases. Predictions including these seven cases are labeled as PrISE C 188 in Figure 4, whereas predictions of PrISE C and PredUs considering the set of 181 proteins are labeled with the suffix 181. The performances of PrISE C in the two cases are similar. PredUs generally outperforms PrISE C , the best performing predictor from the PrISE family. This result is not surprising given that the SVM used by PredUs was trained on this dataset whereas PrISE did not have this advantage.

Figure 4
figure 4

Comparison of PredUs and PrISE C using the dataset DS188, derived from the docking benchmark 3.0. (A) performance of predictions from which homologs from the same species were not used to compute the structural neighbors and the samples used in PredUs and PrISE respectively. (B) performance of predictions that did not consider homologs. Both images show results for the 181 proteins that were predicted by PredUs and PrISE C and for the 188 proteins predicted by PrISE C .

A second comparison of PrISE C and PredUs was performed using the DS56bound dataset. PrISE C and PredUs generated predictions for all the proteins in this dataset. The precision-recall curves presented in Figure 5 show that when homologs from the same species are excluded from the collection of similar structures, PrISE C outperforms PredUs, but when homologs are excluded regardless of the species, the performances of PrISE C and PredUs are comparable. These results indicate that the use of local surface structural similarity is a competitive alternative to the use of protein structural similarity for the problem of predicting protein-protein interface residues.

Figure 5
figure 5

Comparison of PrISE C and PredUs using the dataset DS56bound, derived from CAPRI. The results in (A) correspond to predictions in which homologs from the same species were excluded from the collection of samples and the set of structural neighbors. The results in (B) were obtained excluding homologs from the sets of similar structures.

An evaluation considering additional performance measures is presented in Table 2. The data in this table indicates that PrISE C outperforms PredUs in terms of F1, correlation coefficient, or area under the ROC. The values for precision, recall, F1, Accuracy and CC were computed using the default cutoff values for PrISE C and PredUs.

Table 2 Evaluation of PrISEC and PredUs on DS56bound using different performance measures

A final comparison between PrISE C and PredUs was performed using the DS56unbound dataset. Three out of the 56 proteins (corresponding to the PDB IDs-chains 1ken-H, 1ken-L, and 1ohz-B) were not processed by PredUs because no structural neighbors were found. Figure 6 shows the precision-recall curves of PrISE C and PredUs on the 53 cases covered by PredUs, as well as the performance of PrISE C when all the 56 proteins are considered. A comparison of both predictors using the set of 53 proteins and excluding homologs from the same species indicates that PrISE C outperforms PredUs for precision values > 0.4. On the contrary, when homologs are excluded, the performance of PredUs is better than the performance of PrISE C for precision values ≥ 0.3. Finally, the performance of PrISE C computed on 56 proteins is, surprisingly, slightly better than the performance computed on 53 proteins. This suggests that local structural similarity based interface prediction methods can be effective even in the absence of globally similar structures.

Figure 6
figure 6

Comparison of PrISE C and PredUs using the DS56unbound dataset, derived from CAPRI. (A) shows the performance achieved after removing homologs from the same species from the set of similar structures in PredUs and PrISE C . (B) shows the performances when homologs are excluded. The suffixes 53 and 56 indicate the number of proteins that were used in the experiment.

An evaluation of PrISE C and PredUs using additional performance measures is presented in Table 3. PrISE C outperforms PredUs in terms of F1, CC and AUC when homologs from the same species are excluded from the set of similar structures. When homologs are excluded, PredUs outperforms PrISE C on the set of 53 proteins predicted by PredUs.

Table 3 Evaluation of PrISEC and PredUs on DS56unbound using different performance measures

Comparison with other prediction methods

We compared the performances of PrISE C , Promate [25], PINUP [48], Cons-PPISP [49], and Meta-PPISP [50] using all the proteins in the DS56bound and DS56unbound datasets. The choice of the predictors used in this comparison was based on the results of a comparative study in which they were reported to achieve the best performance among the six different classifiers on two different datasets [8]. Promate uses a scoring function based on features describing evolutionary conservation, chemical character of the atoms, secondary structures, distributions of atoms and amino acids, and distribution of b-factors. Cons-PPISP's predictions are based on a consensus between different artificial neural networks trained on conservation sequence profiles and solvent accessibilities. PINUP uses an empirical scoring function based on side chain energy scores, interface propensity and residue conservation. Meta-PPISP uses linear regression on the scores produced by Cons-PPISP, Promate and PINUP.

In the experiments presented in this subsection, we considered the performance of two PrISE C classifiers according to which proteins were filtered out from the process of extraction of samples: homologs from the same species as the query protein and homologs regardless of the species. The scores used to generate the precision-recall curves of Promate, PINUP, Cons-PPISP and Meta-PPISP were computed using Meta-PPISP's web server.

The precision-recall curves corresponding to the evaluation of the classifiers on the DS56bound and DS56Unbound datasets are shown in Figure 7. On both datasets, PrISE C predictors outperform Meta-PPISP for precision values > 0.35 and achieve performance comparable to that of Meta-PPISP for precision values ≤ 0.35. Furthermore, PrISE C outperform Promate, PINUP, and Cons-PPISP over the entire range of precision and recall values.

Figure 7
figure 7

Performance of different classifiers evaluated on the DS56bound (A) and the DS56unbound (B) datasets. For the PrISE classifiers, "spe." and "hom." show predictions in which samples extracted from homologs from the same specie and homologs, respectively, has been excluded from the prediction process.

An evaluation considering additional performance measures is presented in Table 4. All the performance measures, with exception of AUC ROC, were computed using threshold values of 0.56, 0.28, 0.41, 0.34, and 0.34 on the scores generated by Promate, PINUP, Cons-PPISP, Meta-PPISP, and PrISE C respectively. These threshold values correspond to the default values defined in the Meta-PPISP and PrISE C web servers. The results show that the PrISE C predictors outperform the other predictors on both datasets in terms of F1, correlation coefficient and area under the ROC.

Table 4 Evaluation on the datasets DS56bound and DS56unbound

The results of an experiment using 187 proteins from the DS188 dataset are presented in Figure 8. Protein chain 2vis-C was excluded from the experiment given that Promate could not generate a prediction. When homologs from the same species are excluded, PrISE C outperforms the other predictors except Meta-PPISP. PrISE C outperforms Meta-PPISP for precision values > 0.4 and achieves comparable performance to that of Meta-PPISP for precision values ≤ 0.4. When homologs are excluded, the performance of PrISE C is superior that the performance of PINUP and Promate. PrISE C outperforms Meta-PPISP and Cons-PPISP for precision values > 0.5, and is outperformed by Meta-PPISP for precision values ≤ 0.45.

Figure 8
figure 8

Precision-recall curves of different classifiers evaluated on 187 proteins from the DS188 dataset. For the PrISE classifiers, "spe." and "hom." show predictions in which homologs from the same species and homologs, respectively, has been excluded from the repository of structural elements.

An evaluation using different performance measures is presented in Table 5. According to this table, the performance of both PrISE predictors is superior that the performance of the other classifiers in terms of F1 and CC. Furthermore, when homologs from the same species are excluded, PrISE C outperforms the other classifiers in terms of AUC.

Table 5 Evaluation on 187 proteins from DS188

Prediction performances in the absence of similar proteins

To evaluate the extent to which the performances of PrISE C and PredUs depend on the degree of homology between the query proteins and the proteins used to extract samples or structural neighbors, we compare the results obtained using three different sequence homology cutoffs: 95%, 50% and 30%. The results, shown in Figure 9, indicate that PredUs is more sensitive than PrISE C to the lack of similar proteins in the sets used to extract similar structures. The figure also shows that the performance of PrISE C is competitive with that of Meta-PPISP even when the repository used by PrISE C is composed by proteins sharing < 30% of sequence identity with the query proteins.

Figure 9
figure 9

Performance computed in absence of similar proteins at different similarity levels. Figures (A) and (B) show the precision recall curves computed after excluding from the sets of similar structures homologs (without regarding the species) sharing ≥ 95% of sequence identity with the query proteins. Similarly, figures (C) and (D) show the performances after excluding proteins sharing ≥ 50% sequence identity, and (E) and (F) display the results after filtering out proteins with sequence identity ≥ 30%. The precision-recall curves corresponding to the DS56bound dataset are shown at (A), (C), and (E), and the results computed using the DS56Unbound dataset are labeled as (B), (D), and (F). Figures (E) and (F) were computed using 55 and 52 proteins respectively given that PredUs could not find structural elements for the protein chain 1ynt-L.

Conclusions

We have shown that it is possible to reliably predict protein-protein interface residues using only local surface structural similarity with proteins with known interfaces.

The experiments comparing the performance of the PrISE family of predictors with the structural similarity based interface predictors of Carl et al. [37, 41] show that the use of interface/non interface labels of residues in structurally similar surface patches leads to improved predictions by PrISE. This observation is also supported by the results obtained using PredUs, that implicitly exploits information about non-interface residues reflected in the contacting frequencies of interface residues.

Surface structural similarity based methods for interface residue prediction may use local similarity, overall similarity, or a combination of both. PrISE L , which relies on the similarity between structural elements (i.e. local structural similarity), outperforms random prediction; PrISE G which relies on the similarity between protein surfaces (i.e. general structural similarity) outperforms PrISE L . This result may not be surprising in light of the influence that regions outside the immediate local environment have on the conformation of protein complexes. However, our results show that the best predictions are achieved by PrISE C , using a combination of local and overall surface similarity.

Our results indicate that, in general, PrISE C outperforms several state of the art predictors such as Promate, PINUP, Cons-PPISP, and Meta-PPISP. Blind comparisons of PrISE C and PredUs using the same proteins to extract samples and structural neighbors respectively, indicate that PrISE C achieves performance that is superior to or comparable with that of PredUs. Furthermore, PrISE C is more robust that PredUs at low levels of homology between the query proteins and proteins in the sets used to extract similar structures, while remains competitive with Meta-PPISP.

The interface residue prediction methods such as PrISE that use only local surface structural similarity have an advantage relative to methods that rely on global structural similarity: The former can produce predictions whereas the latter cannot in the absence of protein with structures that are sufficiently similar to the structure of the query protein.

Another advantage of the PrISE family of predictors is that the information needed to compute similar structural elements (i.e. residues in the structural elements, accessible surface area of these residues and their histogram of atom nomenclatures) can be obtained in a reasonable amount of time. The time required for retrieving the samples associated with a query protein from a repository of 21,289,060 structural elements extracted from 88,593 protein chains is in average 90 seconds using a personal computer (Intel Core2 Duo CPU at 2.40 GHz, 4 MB of RAM and a hard disk of 232 GB).

We conclude that methods based on local surface structural similarity are a simple yet effective approach to the problem of prediction of protein-protein interface residues.

Endnotes

  1. a.

    An explanation of the process used to select the city block metric from a set of different metrics is presented in the Additional File 1.

  2. b.

    Based on results of exploratory experiments, we found that 50, 200, and 500 similar structural elements are adequate (respectively) for performing prediction using PrISE L , PrISE G , and PrISE C . See Figures 4 to 6 and the corresponding discussion in the Additional File 1 for details.

  3. c.

    See the Additional File 1 for a discussion on the choice of the threshold.

  4. d.

    See section four of the Additional File 1, that also includes an example of the relationship between the scores of the predictors in the PrISE family.

  5. e.

    Additional results using DS24Carl, DS56bound and DS56unbound are presented in section five of the Additional File 1.

References

  1. Giot L, Bader JS, Brouwer C, Chaudhuri A, Kuang B, Li Y, Hao YL, Ooi CE, Godwin B, Vitols E, Vijayadamodar G, Pochart P, Machineni H, Welsh M, Kong Y, Zerhusen B, Malcolm R, Varrone Z, Collis A, Minto M, Burgess S, McDaniel L, Stimpson E, Spriggs F, Williams J, Neurath K, Ioime N, Agee M, Voss E, Furtak K, Renzulli R, Aanensen N, Carrolla S, Bickelhaupt E, Lazovatsky Y, DaSilva A, Zhong J, Stanyon CA, Finley RL, White KP, Braverman M, Jarvie T, Gold S, Leach M, Knight J, Shimkets RA, McKenna MP, Chant J, Rothberg JM: A protein interaction map of Drosophila melanogaster. Science 2003, 302(5651):1727–1736. 10.1126/science.1090289

    Article  CAS  PubMed  Google Scholar 

  2. Li S, Armstrong CM, Bertin N, Ge H, Milstein S, Boxem M, Vidalain PO, Han JDJ, Chesneau A, Hao T, Goldberg DS, Li N, Martinez M, Rual JF, Lamesch P, Xu L, Tewari M, Wong SL, Zhang LV, Berriz GF, Jacotot L, Vaglio P, Reboul J, Hirozane-Kishikawa T, Li Q, Gabel HW, Elewa A, Baumgartner B, Rose DJ, Yu H, Bosak S, Sequerra R, Fraser A, Mango SE, Saxton WM, Strome S, Heuvel SVD, Piano F, Vandenhaute J, Sardet C, Gerstein M, Doucette-Stamm L, Gunsalus KC, Harper JW, Cusick ME, Roth FP, Hill DE, Vidal M: A map of the interactome network of the metazoan C. elegans. Science 2004, 303(5657):540–543. 10.1126/science.1091403

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  3. Krogan NJ, Cagney G, Yu H, Zhong G, Guo X, Ignatchenko A, Li J, Pu S, Datta N, Tikuisis AP, Punna T, Peregrín-Alvarez JM, Shales M, Zhang X, Davey M, Robinson MD, Paccanaro A, Bray JE, Sheung A, Beattie B, Richards DP, Canadien V, Lalev A, Mena F, Wong P, Starostine A, Canete MM, Vlasblom J, Wu S, Orsi C, Collins SR, Chandran S, Haw R, Rilstone JJ, Gandi K, Thompson NJ, Musso G, Onge PS, Ghanny S, Lam MHY, Butland G, Altaf-Ul AM, Kanaya S, Shilatifard A, O'Shea E, Weissman JS, Ingles CJ, Hughes TR, Parkinson J, Gerstein M, Wodak SJ, Emili A, Greenblatt JF: Global landscape of protein complexes in the yeast Saccharomyces cerevisiae. Nature 2006, 440(7084):637–643. 10.1038/nature04670

    Article  CAS  PubMed  Google Scholar 

  4. Yu J, Fotouhi F: Computational approaches for predicting protein-protein interactions: a survey. J Med Syst 2006, 30: 39–44. 10.1007/s10916-006-7402-3

    Article  PubMed  Google Scholar 

  5. Li X, Wu M, Kwoh CK, Ng SK: Computational approaches for detecting protein complexes from protein interaction networks: a survey. BMC Genomics 2010, 11(1):S3. 10.1186/1471-2164-11-S1-S3

    Article  PubMed Central  PubMed  Google Scholar 

  6. Fernández-Recio J: Prediction of protein binding sites and hot spot. Wiley Interdisciplinary Reviews: Computational Molecular Science 2011.

    Google Scholar 

  7. Ezkurdia I, Bartoli L, Fariselli P, Casadio R, Valencia A, Tress ML: Progress and challenges in predicting protein-protein interaction sites. Brief Bioinform 2009, 10(3):233–246.

    Article  CAS  PubMed  Google Scholar 

  8. Zhou HX, Qin S: Interaction-Site Prediction for Protein Complexes: a Critical Assessment. Bioinformatics 2007, 23: 3386–3387. 10.1093/bioinformatics/btm434

    Article  PubMed  Google Scholar 

  9. de Vries SJ, Bonvin AMJJ: How proteins get in touch: interface prediction in the study of biomolecular complexes. Curr Protein Pept Sci 2008, 9(4):394–406. 10.2174/138920308785132712

    Article  CAS  PubMed  Google Scholar 

  10. Bartoli L, Martelli PL, Rossi I, Fariselli P, Casadio R: Prediction of Protein-Protein Interacting Sites: How to Bridge Molecular Events to Large Scale Protein Interaction Networks. In CMSB 09 Proceedings of the 7th International Conference on Computational Methods in Systems Biology. Edited by: Degano, Pierpaolo, Gorrieri, Roberto. Berlin: Springer-Verlag; 2009:1–17.

    Google Scholar 

  11. Nussinov R: Computational protein-protein interactions. 2009. CRC CRC

    Book  Google Scholar 

  12. Tuncbag N, Kar G, Keskin O, Gursoy A, Nussinov R: A survey of available tools and web servers for analysis of protein-protein interactions and interfaces. Brief Bioinform 2009, 10(3):217–232.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  13. Fariselli P, Pazos F, Valencia A, Casadio R: Prediction of protein-protein interaction sites in heterocomplexes with neural networks. Eur J Biochem 2002, 269(5):1356–1361. 10.1046/j.1432-1033.2002.02767.x

    Article  CAS  PubMed  Google Scholar 

  14. Yan C, Dobbs D, Honavar V: A two-stage classifier for identification of protein-protein interface residues. Bioinformatics 2004, 20(Suppl 1):i371-i378. 10.1093/bioinformatics/bth920

    Article  CAS  PubMed  Google Scholar 

  15. Bradford JR, Westhead DR: Improved prediction of protein-protein binding sites using a support vector machines approach. Bioinformatics 2005, 21(8):1487–1494. 10.1093/bioinformatics/bti242

    Article  CAS  PubMed  Google Scholar 

  16. Wu F, Olson B, Dobbs D, Honavar V: Comparing Kernels For Predicting Protein Binding Sites From Amino Acid Sequenc. In IEEE Joint Conference on Neural Networks. Vancouver, Canada: IEEE Press; 2006.

    Google Scholar 

  17. Chung JL, Wang W, Bourne PE: High-throughput identification of interacting protein-protein binding sites. BMC Bioinforma 2007, 8: 223. 10.1186/1471-2105-8-223

    Article  Google Scholar 

  18. Ofran Y, Rost B: ISIS: interaction sites identified from sequence. Bioinformatics 2007, 23(2):e13-e16. 10.1093/bioinformatics/btl303

    Article  CAS  PubMed  Google Scholar 

  19. Porollo A, Meller J: Prediction-based fingerprints of protein-protein interactions. Proteins: Struct, Funct and Bioinf 2007, 66(3):630–645.

    Article  CAS  Google Scholar 

  20. Liu B, Wang X, Lin L, Tang B, Dong Q, Wang X: Prediction of protein binding sites in protein structures using hidden Markov support vector machine. BMC Bioinforma 2009, 10: 381. 10.1186/1471-2105-10-381

    Article  Google Scholar 

  21. Sikić M, Tomić S, Vlahovicek K: Prediction of protein-protein interaction sites in sequences and 3D structures by random forests. PLoS Comput Biol 2009, 5: e1000278. 10.1371/journal.pcbi.1000278

    Article  PubMed Central  PubMed  Google Scholar 

  22. Liu R, Jiang W, Zhou Y: Identifying protein-protein interaction sites in transient complexes with temperature factor, sequence profile and accessible surface area. Amino Acids 2010, 38: 263–270. 10.1007/s00726-009-0245-8

    Article  CAS  PubMed  Google Scholar 

  23. Murakami Y, Mizuguchi K: Applying the Naive Bayes classifier with kernel density estimation to the prediction of protein-protein interaction sites. Bioinformatics 2010, 26(15):1841–1848. 10.1093/bioinformatics/btq302

    Article  CAS  PubMed  Google Scholar 

  24. Jones S, Thornton JM: Prediction of protein-protein interaction sites using patch analysis. J Mol Biol 1997, 272: 133–143. 10.1006/jmbi.1997.1233

    Article  CAS  PubMed  Google Scholar 

  25. Neuvirth H, Raz R, Schreiber G: ProMate: A Structure Based Prediction Program to Identify the Location of Protein-Protein Binding Sites. J Mol Biol 2004, 338: 181–199. 10.1016/j.jmb.2004.02.040

    Article  CAS  PubMed  Google Scholar 

  26. Rossi A, Marti-Renom MA, Sali A: Localization of binding sites in protein structures by optimization of a composite scoring function. Protein Sci 2006, 15(10):2366–2380. 10.1110/ps.062247506

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  27. Jones S, Mukarami Y: Patch Prediction of Protein Interaction Sites: Validation of a Scoring Function for an Online Server. Bioinformatics Research and Development 2007, 4414: 303–313. 10.1007/978-3-540-71233-6_24

    Google Scholar 

  28. Naveed H, Jackups R, Liang J: Predicting weakly stable regions, oligomerization state, and protein-protein interfaces in transmembrane domains of outer membrane proteins. Proc Natl Acad Sci USA 2009, 106(31):12735–12740. 10.1073/pnas.0902169106

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  29. Shoemaker BA, Zhang D, Thangudu RR, Tyagi M, Fong JH, Marchler-Bauer A, Bryant SH, Madej T, Panchenko AR: Inferred Biomolecular Interaction Server-a web server to analyze and predict protein interacting partners and binding sites. Nucleic Acids Res 2010, 38(Database):D518-D524. 10.1093/nar/gkp842

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  30. Ma B, Elkayam T, Wolfson H, Nussinov R: Protein-protein interactions: structurally conserved residues distinguish between binding sites and exposed protein surfaces. Proc Natl Acad Sci USA 2003, 100(10):5772–5777. 10.1073/pnas.1030237100

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  31. Chung JL, Wang W, Bourne PE: Exploiting sequence and structure homologs to identify protein-protein binding sites. Proteins 2006, 62(3):630–640.

    Article  CAS  PubMed  Google Scholar 

  32. Tuncbag N, Gursoy A, Guney E, Nussinov R, Keskin O: Architectures and functional coverage of protein-protein interfaces. J Mol Biol 2008, 381(3):785–802. 10.1016/j.jmb.2008.04.071

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  33. Dayhoff JE, Shoemaker BA, Bryant SH, Panchenko AR: Evolution of protein binding modes in homooligomers. J Mol Biol 2010, 395(4):860–870. 10.1016/j.jmb.2009.10.052

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  34. Guharoy M, Chakrabarti P: Conserved residue clusters at protein-protein interfaces and their use in binding site identification. BMC Bioinforma 2010, 11: 286. 10.1186/1471-2105-11-286

    Article  Google Scholar 

  35. Berman HM, Westbrook J, Feng Z, Gilliland G, Bhat TN, Weissig H, Shindyalov IN, Bourne PE: The Protein Data Bank. Nucleic Acids Res 2000, 28: 235–242. 10.1093/nar/28.1.235

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  36. Konc J, Janežič D: Protein-protein binding-sites prediction by protein surface structure conservation. J Chem Inf Model 2007, 47(3):940–944. 10.1021/ci6005257

    Article  CAS  PubMed  Google Scholar 

  37. Carl N, Konc J, Janežič D: Protein surface conservation in binding sites. J Chem Inf Model 2008, 48(6):1279–1286. 10.1021/ci8000315

    Article  CAS  PubMed  Google Scholar 

  38. Zhang QC, Petrey D, Norel R, Honig BH: Protein interface conservation across structure space. Proc Natl Acad Sci USA 2010, 107(24):10896–10901. 10.1073/pnas.1005894107

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  39. Zhang QC, Deng L, Fisher M, Guan J, Honig B, Petrey D: PredUs: a web server for predicting protein interfaces using structural neighbors. Nucleic Acids Res 2011, 39: W283-W287. 10.1093/nar/gkr311

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  40. Konc J, Janežič D: ProBiS algorithm for detection of structurally similar protein binding sites by local structural alignment. Bioinformatics 2010, 26(9):1160–1168. 10.1093/bioinformatics/btq100

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  41. Carl N, Konc J, Vehar B, Janežič D: Protein-Protein Binding Site Prediction by Local Structural Alignment. J Chem Inf Model 2010, 50(10):1906–1913. 10.1021/ci100265x

    Article  CAS  PubMed  Google Scholar 

  42. Hubbard S, Thornton J: NACCESS, Computer Program, Department of Biochemistry and Molecular Biology.University College London; 1993. [http://www.bioinf.manchester.ac.uk/naccess/]

    Google Scholar 

  43. Jordan RA, Wu F, Dobbs D, Honavar V: ProtinDb: A data base of protein-protein interface residues.Iowa State University; 2011. [http://protindb.cs.iastate.edu/]

    Google Scholar 

  44. Henrick K, Thornton J: PQS: a protein quaternary structure file server. Trends Biochem Sci 1998, 23(9):358. 10.1016/S0968-0004(98)01253-5

    Article  CAS  PubMed  Google Scholar 

  45. Hwang H, Pierce B, Mintseris J, Janin J, Weng Z: Protein-protein docking benchmark version 3.0. Proteins 2008, 73(3):705–709. 10.1002/prot.22106

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  46. Janin J, Wodak S: The third CAPRI assessment meeting Toronto, Canada, April 20–21, 2007. Structure 2007, 15(7):755–759. 10.1016/j.str.2007.06.007

    Article  CAS  PubMed  Google Scholar 

  47. Baldi P, Brunak S, Chauvin Y, Andersen CA, Nielsen H: Assessing the accuracy of prediction algorithms for classification: an overview. Bioinformatics 2000, 16(5):412–424. 10.1093/bioinformatics/16.5.412

    Article  CAS  PubMed  Google Scholar 

  48. Liang S, Zhang C, Liu S, Zhou Y: Protein binding site prediction using an empirical scoring function. Nucl Acids Res 2006, 34(13):3698–3707. 10.1093/nar/gkl454

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  49. Chen H, Zhou HX: Prediction of interface residues in protein-protein complexes by a consensus neural network method: Test against NMR data. Proteins: Struct Funct Bioinf 2005, 61: 21–35. 10.1002/prot.20514

    Article  CAS  Google Scholar 

  50. Qin S, Zhou HX: Meta-PPISP: a meta web server for protein-protein interaction site prediction. Bioinformatics 2007, 23(24):3386–3387. 10.1093/bioinformatics/btm434

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgements

This work was funded in part by the National Institutes of Health grant GM066387 to Vasant Honavar and Drena Dobbs and in part by a research assistantship funded by the Center for Computational Intelligence, Learning, and Discovery. The authors thank Li Xue, Rasna Walia, and Fadi Towfic for useful discussions and suggestions. The work of Vasant Honavar while working at the National Science Foundation was supported by the National Science Foundation. Any opinion, finding, and conclusions contained in this article are those of the authors and do not necessarily reflect the views of the National Science Foundation.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Rafael A Jordan or Vasant Honavar.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

The study was originally conceived by VH and RAJ. RAJ carried out the experiments. All the authors discussed the experimental design, and participated in the analysis and interpretation of the data. RAJ wrote the initial draft of the manuscript. All authors revised and approved the final manuscript.

Electronic supplementary material

Authors’ original submitted files for images

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Jordan, R.A., EL-Manzalawy, Y., Dobbs, D. et al. Predicting protein-protein interface residues using local surface structural similarity. BMC Bioinformatics 13, 41 (2012). https://doi.org/10.1186/1471-2105-13-41

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/1471-2105-13-41

Keywords