Software

ArrayIDer: automated structural re-annotation pipeline for DNA microarrays

Bart HJ van den Berg^1,2 , Jay H Konieczka³ , Fiona M McCarthy^1,2 and Shane C Burgess^1,2,4

¹Department of Basic Science, PO Box 6100, College of Veterinary Medicine, Mississippi State University, Mississippi State, MS 39762, USA

²Instistute for Digital Biology, Mississippi State University, Mississippi State, MS 39762, USA

³Department of Molecular & Cellular Biology, University of Arizona, 1656 E. Mabel, MRB 317, Tucson, AZ 85724, USA

⁴Life Sciences and Biotechnology Institute, Mississippi State University, Mississippi State, Mississippi 39762, USA

author email corresponding author email

BMC Bioinformatics 2009, 10:30doi:10.1186/1471-2105-10-30

The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2105/10/30

Received:	16 October 2008
Accepted:	23 January 2009
Published:	23 January 2009

© 2009 Berg et al; licensee BioMed Central Ltd.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Systems biology modeling from microarray data requires the most contemporary structural and functional array annotation. However, microarray annotations, especially for non-commercial, non-traditional biomedical model organisms, are often dated. In addition, most microarray analysis tools do not readily accept EST clone names, which are abundantly represented on arrays. Manual re-annotation of microarrays is impracticable and so we developed a computational re-annotation tool (ArrayIDer) to retrieve the most recent accession mapping files from public databases based on EST clone names or accessions and rapidly generate database accessions for entire microarrays.

Results

We utilized the Fred Hutchinson Cancer Research Centre 13K chicken cDNA array – a widely-used non-commercial chicken microarray – to demonstrate the principle that ArrayIDer could markedly improve annotation. We structurally re-annotated 55% of the entire array. Moreover, we decreased non-chicken functional annotations by 2 fold. One beneficial consequence of our re-annotation was to identify 290 pseudogenes, of which 66 were previously incorrectly annotated.

Conclusion

ArrayIDer allows rapid automated structural re-annotation of entire arrays and provides multiple accession types for use in subsequent functional analysis. This information is especially valuable for systems biology modeling in the non-traditional biomedical model organisms.

Background

Microarrays have become a standard tool for functional genomics allowing analysis of thousands of mRNA transcripts simultaneously and they are widely used for a diverse range of species [1-4]. Microarrays have been applied to species regardless of whether or not their whole genome sequence is available. However, understanding the biological meaning represented by microarray data is hindered by lack of structural – and functional annotation (i.e. identifying the genes represented on arrays and linking these to functional information, respectively). Despite the prevalence of EST sequences represented on microarrays for most species, existing tools for expression data analyses and array functional annotation [5-11] do not accept EST clone names or accessions as input. Therefore, researchers are often hindered to first convert EST clone names or accession numbers to identifiers compatible with these functional analyses tools.

Although 10 software packages have been developed to map between popular database identifiers [5,9,10,12-18], these gene cross-reference tools are not compatible with EST clone name input, focus only on widely-used commercially-available arrays or only incorporate limited organisms. Moreover, functional information (such as the Gene Ontology) is associated with National Center for Biotechnology Information (NCBI) and UniProtKB accessions and annotations provided by vendors, or researchers who provide non-commercial arrays, may be very dated. Although EasyGO [18] annotates several traditionally-agricultural species' microarrays, users cannot directly access the assigned structural annotations for downstream functional analysis. To derive value from microarray experiments, especially as research in more species becomes enabled by microarray technology, it is crucial to improve the annotation for existing arrays in ways that is accessible for array users.

Here we describe ArrayIDer, a user-friendly program that generates a library of public accessions available from the Gene Expression Omnibus (GEO) browser [19] for both custom-made and commercial arrays. ArrayIDer currently accepts data from any microarray containing EST identifiers compatible with the NCBI UniGene database [20] from nine species: human, mouse, rat, horse, pig, chicken, cow, Arabidopsis, and zebra fish. The program accepts either cDNA/EST clone names or the corresponding GenBank EST nucleotide accession. ArrayIDer generates a library of gene and protein accessions from the latest updated NCBI UniGene [20] and International Protein Index (IPI) [21] databases. ArrayIDer retrieves identifiers from UniGene and IPI that match the EST input list. All annotations of ESTs to genes (and accompanied proteins) are as assigned by NCBI UniGene. ESTs listed in UniGene are grouped in a UniGene cluster based on their nucleotide overlap. The gene represented by each cluster is determined by the top BlastX hit of the nucleotide sequence. Gene information regarding the EST cluster to gene match is retrieved from the NCBI Homologene database, where known orthologs for genes are mapped through multiple species. The structural annotations retrieved by ArrayIDer are only retrieved from the species-specific UniGene database, which contains pre-assigned structural annotations made according to the methods used at the Homologene database. An online version of ArrayIDer allows rapid identifier searching of EST libraries of several species generated by AgBase.

Implementation

Microarray libraries for multiple species generated with ArrayIDer are available at the AgBase website http://agbase.msstate.edu/ webcite → Array Annotation → ArrayIDer) and researchers can use the simple interface to search structural annotations for their microarray ESTs or accessions in the species' EST library. Libraries available online are updated when new versions of the underlying databases are released. Any available library can be extended by users by contacting AgBase directly to request structural annotation for their arrays. Conversely, and especially for those conversant with Perl, ArrayIDer is available for download for researchers to generate a library for species currently not listed on AgBase to avoid requesting the work be done by AgBase staff. ArrayIDer runs locally via the command line console or by execution in a designated directory. To run locally ArrayIDer requires: 1) Perl platform (version 5.8.8 built 8.17 or higher); 2) installation of Archive::Extract, DBI and NET::FTP Perl modules; 3) a text formatted input file of cDNA/EST clone names or GenBank nucleotide sequence accessions; and 4) an internet connection. The script downloads and unpacks the required databases directly from the internet.

The ArrayIDer standalone version reads the input list and searches each entry against the latest version of NCBI UniGene to retrieve initial gene and protein information (Figure Fig. 1). Input entries with no UniGene match are written to an output file (UniGene_NO_MATCH.xls). Input entries that match a UniGene ID are used to search the IPI database for additional gene and protein identifiers information. Input entries with no IPI match are written to a second output file (IPI_NO_MATCH.xls). Input entries with IPI match are written to a third output file (ArrayIDer_FINAL.xls) containing accessions matching both UniGene and IPI and accessions with only UniGene matches. ArrayIDer_FINAL.xls contains 13 different types of accessions from 7 public databases (Table 1).

The online ArrayIDer library for a species contains the same table as the standalone version ArrayIDer_FINAL.xls output file for the same species. However, the online libraries also contain additional mapped EST or clone name identifiers assigned by AgBase using additional methods (including functional domain mapping, manual database searching and identifier correction) for comprehensive identifier mapping. An example of the online output can be found in Figure Fig. 2.

Results and discussion

ArrayIDer allows researchers to rapidly update the structural annotation of their microarray and use this information in downstream gene expression modeling and pathways analysis. To demonstrate the use of ArrayIDer we selected a widely-used non-commercial array, the Fred Hutchinson Cancer Research Centre (FHCRC) 13K chicken cDNA array [22]. The array's data table was downloaded from the NCBI GEO browser (accession GPL2863).

Data Output and performance

Microarray structural re-annotation results were compared to the annotation currently provided for the FHCRC array. In total, 13,234 probe identifiers were submitted as input for the script. Originally, 1136 array probes were structurally annotated to a chicken gene, with a further 7820 structural annotations to other (non-chicken) species (including fruit fly, sea snake, and frog). ArrayIDer provided a 6.67-fold increase (1,136 vs. 7,581) in chicken-specific annotations. Among the chicken structural annotations assigned, 55% (4177) are assigned to a Swiss-Prot/TrEMBL accession. 45% (3404) are assigned to a predicted "XP_" accession, which are candidates for further annotation curation. Identification and curation of these XP_ accessions improves the species' genome annotation.

Identification of Pseudogenes

Initially, we identified 290 transcripts on the FHCRC array with ArrayIDer that mapped to gene elements labelled as pseudogenes. Pseudogenes have been defined as defunct relatives of known genes that are considered non-functional; however, some pseudogenes can be transcribed and play a role in gene regulation and expression [23]. Moreover, pseudogenes are difficult to identify and may be miss-annotated by genome annotation. Manual inspection of the identified pseudogenes from this array (including BLAST analysis and synteny) found 66 gene elements that are likely to be functional. We have submitted these changes to NCBI and AgBase. Four months after submission of the changes, we re-analyzed the FHCRC array with ArrayIDer and identified the remaining 224 gene elements labelled as pseudogenes, indicating the 66 genes are corrected and updated in the public database.

Improved Functional annotation

The Gene Ontology (GO) is the de facto standard method for functional annotation of gene products [24]. While ESTs are represented on arrays, GO annotation is linked to gene or protein IDs. By linking ESTs represented on arrays to protein or gene ac-cessions, we can associate function to array elements. For example, using the FHCRC chicken cDNA array, chicken-specific GO annotations are highly desired. If no chicken-specific annotations are available, non-chicken annotations can be used for deriving biological value from the data. Using ArrayIDer, we were able to decrease non-chicken functional annotations associated with the array by 2 fold (from 7309 to 3671).

Conclusion

Continual structural- and functional re-annotation of microarrays ensures the most up-to-date gene product information for modeling functional genomics datasets. ArrayIDer allows rapid automated re-annotation of entire arrays and provides the user with multiple accession types for use in functional analysis. Together this information is especially valuable for the non-traditional biomedical model organisms to utilize the wide range of existing tools for systems biology modeling downstream. We focus on expanding the number of public databases used to assign accessions, include up-to-date, curated functional annotations for both commercial and custom designed microarrays (including specific requests) and incorporate this information into the AgBase database for user-friendly online access.

Availability and requirements

Project name: ArrayIDer

Project home page: http://www.agbase.msstate.edu webcite → Array annotation → ArrayIDer

Operating system(s): Platform independent

Programming language: Perl

Other requirements: Perl modules Archive::Extract, DBI and NET::FTP

License: Freely available

Authors' contributions

BVDB developed the pipeline, compiled the tool's script and drafted the manuscript. JHK contributed in the tool's script optimization and performance evaluation. FMM and SCB participated in the pipeline development and help draft the manuscript. All authors read and approved the final manuscript.

Acknowledgements

The authors like to acknowledge P. Manda for providing technical support on the online script and Dr. D. Peddinti for evaluation of the tool. The project was supported by the National Research Initiative of the USDA Cooperative State Research, Education and Extension Service, grant numbers 2004-34481-14513, 2004-35204-14829, 2006-35204-16549 and 2007-35205-17941.

References

1. Gresham D, Dunham MJ, Botstein D: Comparing whole genomes using DNA microarrays.

   Nature reviews 2008, 9(4):291-302. PubMed Abstract | Publisher Full Text

2. Jares P: DNA microarray applications in functional genomics.

   Ultrastructural pathology 2006, 30(3):209-219. PubMed Abstract | Publisher Full Text

3. Seidel M, Niessner R: Automated analytical microarrays: a critical review.

   Anal Bioanal Chem 2008, 391(5):1521-1544. PubMed Abstract | Publisher Full Text

4. Sipe CW, Saha MS: The use of microarray technology in nonmammalian vertebrate systems.

   Methods in molecular biology 2007, 382:1-16. PubMed Abstract

5. Alibes A, Yankilevich P, Canada A, Diaz-Uriarte R: IDconverter and IDClight: conversion and annotation of gene and protein IDs.

   BMC bioinformatics 2007, 8:9. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

6. Beissbarth T, Speed TP: GOstat: find statistically overrepresented Gene Ontologies within a group of genes.

   Bioinformatics 2004, 20(9):1464-1465. PubMed Abstract | Publisher Full Text

7. Beisvag V, Junge FK, Bergum H, Jolsum L, Lydersen S, Gunther CC, Ramampiaro H, Langaas M, Sandvik AK, Laegreid A: GeneTools – application for functional annotation and statistical hypothesis testing.

   BMC bioinformatics 2006, 7:470. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

8. Cavalieri D, Castagnini C, Toti S, Maciag K, Kelder T, Gambineri L, Angioli S, Dolara P: Eu. Gene Analyzer a tool for integrating gene expression data with pathway databases.

   Bioinformatics 2007, 23(19):2631-2. PubMed Abstract | Publisher Full Text

9. Dahlquist KD, Salomonis N, Vranizan K, Lawlor SC, Conklin BR: GenMAPP, a new tool for viewing and analyzing microarray data on biological pathways.

   Nat Genet 2002, 31(1):19-20. PubMed Abstract | Publisher Full Text

10. Dennis G Jr, Sherman BT, Hosack DA, Yang J, Gao W, Lane HC, Lempicki RA: DAVID: Database for Annotation, Visualization, and Integrated Discovery.

    Genome biology 2003, 4(5):P3. PubMed Abstract | Publisher Full Text

11. Usadel B, Nagel A, Steinhauser D, Gibon Y, Blasing OE, Redestig H, Sreenivasulu N, Krall L, Hannah MA, Poree F, et al.: PageMan: an interactive ontology tool to generate, display, and annotate overview graphs for profiling experiments.

    BMC bioinformatics 2006, 7:535. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

12. Berriz GF, Roth FP: The Synergizer service for translating gene, protein and other biological identifiers.

    Bioinformatics 2008, 24(19):2272-2273. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

13. Bussey KJ, Kane D, Sunshine M, Narasimhan S, Nishizuka S, Reinhold WC, Zeeberg B, Ajay W, Weinstein JN: MatchMiner: a tool for batch navigation among gene and gene product identifiers.

    Genome biology 2003, 4(4):R27. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

14. Castillo-Davis CI, Hartl DL: GeneMerge – post-genomic analysis, data mining, and hypothesis testing.

    Bioinformatics 2003, 19(7):891-892. PubMed Abstract | Publisher Full Text

15. Cote RG, Jones P, Martens L, Kerrien S, Reisinger F, Lin Q, Leinonen R, Apweiler R, Hermjakob H: The Protein Identifier Cross-Referencing (PICR) service: reconciling protein identifiers across multiple source databases.

    BMC bioinformatics 2007, 8:401. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

16. Diehn M, Sherlock G, Binkley G, Jin H, Matese JC, Hernandez-Boussard T, Rees CA, Cherry JM, Botstein D, Brown PO, et al.: SOURCE: a unified genomic resource of functional annotations, ontologies, and gene expression data.

    Nucleic acids research 2003, 31(1):219-223. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

17. Khatri P, Voichita C, Kattan K, Ansari N, Khatri A, Georgescu C, Tarca AL, Draghici S: Onto-Tools: new additions and improvements in 2006.

    Nucleic acids research 2007, 35(Web Server issue):W206-211. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

18. Zhou X, Su Z: EasyGO: Gene Ontology-based annotation and functional enrichment analysis tool for agronomical species.

    BMC genomics 2007, 8:246. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

19. Gene Expression Omnibus [http://www.ncbi.nlm.nih.gov/geo/] webcite

    

20. UniGene website [http://www.ncbi.nlm.nih.gov/./unigene/] webcite

    

21. International Protein Index (IPI) [http://www.ebi.ac.uk/IPI/IPIhelp.html] webcite

    

22. Burnside J, Neiman P, Tang J, Basom R, Talbot R, Aronszajn M, Burt D, Delrow J: Development of a cDNA array for chicken gene expression analysis.

    BMC genomics 2005, 6(1):13. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

23. D'Errico I, Gadaleta G, Saccone C: Pseudogenes in metazoa: origin and features.

    Briefings in functional genomics & proteomics 2004, 3(2):157-167. PubMed Abstract | Publisher Full Text

24. Lewis SE: Gene Ontology: looking backwards and forwards.

    Genome biology 2005, 6(1):103. PubMed Abstract | Publisher Full Text | PubMed Central Full Text

Have something to say? Post a comment on this article!